advocacy/54066: ACPI repeating error messages at boot time - no apm
device created.
Charlie &
madill48 at earthlink.net
Thu Jul 3 09:10:20 PDT 2003
>Number: 54066
>Category: advocacy
>Synopsis: ACPI repeating error messages at boot time - no apm device created.
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-advocacy
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Jul 03 09:10:18 PDT 2003
>Closed-Date:
>Last-Modified:
>Originator: Charlie &
>Release: FreeBSD 5.1-CURRENT i386
>Organization:
>Environment:
System: FreeBSD Tolkienslair.atlantis 5.1-CURRENT FreeBSD 5.1-CURRENT #2: Thu Jul 3 07:37:55 PDT 2003 root at Tolkienslair.atlantis:/usr/obj/usr/src/sys/CALIGULA i386
===================
Dell - Inspiron 4000 laptop
>Description:
The problem is in the acpi.ko module. Until recently - I could use an older
version of the module and it worked fine. But recent changes to the
kernel have rendered this oloder module unusable.
During bootup - no apm module is created in /dev - so apm does not work
and there is no battery monitoring or other apm features available.
Disabling acpi does not work as my sound ceases to function - no mixer
device is created. All in all - this bug is creating many different problems
and needs a fix.
The following is the output from dmesg after booting:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #2: Thu Jul 3 07:37:55 PDT 2003
root at Tolkienslair.atlantis:/usr/obj/usr/src/sys/CALIGULA
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0771000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07711cc.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 847398071 Hz
CPU: Intel Pentium III (847.40-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268283904 (255 MB)
avail memory = 252563456 (240 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL CPi R > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fbd80
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 7 INTD is routed to irq 11
pcib0: slot 8 INTA is routed to irq 5
pcib0: slot 16 INTA is routed to irq 11
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1420 PCI-CardBus Bridge> at device 3.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 3 INTA is routed to irq 11
cbb1: <TI1420 PCI-CardBus Bridge> at device 3.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: slot 3 INTA is routed to irq 11
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x860-0x86f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1
ums0: 4 buttons and Z dir.
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 8.0 (no driver attached)
pci0: <simple comms> at device 16.0 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ACPI-0293: *** Warning: Buffer created with zero length in AML
ACPI-0293: *** Warning: Buffer created with zero length in AML
ACPI-0293: *** Warning: Buffer created with zero length in AML
ACPI-0293: *** Warning: Buffer created with zero length in AML
dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem 0x88002000-0x880027ff,0x88002800-0x88002fff irq 11 at device 0.0 on cardbus0
dc0: Ethernet address: 00:10:a4:c1:e8:20
miibus0: <MII bus> on dc0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sio4: <Xircom Cardbus modem> port 0x1080-0x1087 mem 0x88002000-0x880027ff,0x88002800-0x88002fff irq 11 at device 0.1 on cardbus0
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ata1-slave: timeout waiting for interrupt
ata1-slave: ATAPI identify failed
ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ltmdm0: <Lucent Winmodem> port 0xd400-0xd4ff,0xdcd8-0xdcdf mem 0xf3ffdc00-0xf3ffdcff irq 11 at device 16.0 on pci0
ltmdm0: type Virtual 16550A
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
pcm0: <ESS Technology Maestro3> port 0xd800-0xd8ff mem 0xf3ffe000-0xf3ffffff irq 5 at device 8.0 on pci0
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
>How-To-Repeat:
Occurs every bootup.
>Fix:
acpi.ko is fubar.
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-advocacy
mailing list