ACPI issues with PC engines APU beta board

[Larry Baird]

On Wed, Jan 22, 2014 at 12:33:30PM -0500, Jung-uk Kim wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> On 2014-01-22 11:32:15 -0500, Larry Baird wrote:
> > I have a protoype board from PC Engines for their upcoming APU
> > board. The board runs fine under FreeBSD 8.4 release but fails to
> > boot using either FreeBSD 9.2 release or FreeBSD 10.0 release.
> > Verbose boot seems to indicate issue is with ACPI.  I am working
> > with PC Engines to get FreeBSD up and running on their board.
> > Hopefully attached information is enough to determine issue with
> > BIOS. I'll then feed this information back to PC Engines so they
> > can provide the information to their BIOS provider.
> > 
> > Attached is a verbose dmesg from 9.2. In case it gets stripped you 
> > can also find dmesg at:
> > ftp://ftp.gta.com/pub/apu/FreeBSD9.2/bootVerbose.txt
> > 
> > Dmesg from booting 8.4 is at:
> > ftp://ftp.gta.com/pub/apu/FreeBSD8.4/dmesg.boot
> > 
> > Dump of sysctl.hw.acpi from FreeBSD 8.4 is:
> > 
> > hw.acpi.supported_sleep_state: S1 S2 S3 S4 S5 
> > hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S1 
> > hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 
> > hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 
> > hw.acpi.verbose: 0 hw.acpi.disable_on_reboot: 0 
> > hw.acpi.handle_reboot: 1 hw.acpi.reset_video: 0 
> > hw.acpi.cpu.cx_lowest: C1
> > 
> > acpidump -dt from from FreeBSD 8.4 is at: 
> > ftp://ftp.gta.com/pub/apu/FreeBSD8.4/lab-pcengines-apu1b.asl
> 
> Try setting "debug.acpi.disabled=sysres" in loader.
No effect.

-- 
------------------------------------------------------------------------
Larry Baird
Global Technology Associates, Inc. 1992-2012 	| http://www.gta.com
Celebrating Twenty Years of Software Innovation | Orlando, FL
Email: lab at gta.com                 		| TEL 407-380-0220