FreeBSD 8.0 hangs on reboot
Зиновьев Александр
Jason-z at yandex.ru
Wed Apr 7 10:43:49 UTC 2010
Hi, All!
I have installed FreeBSD 8.0 Release on i386 PC, with Foxconn 661M04-MX-6L motherboard.
When I try to "reboot" or "shutdown -r", system freezes with message "Rebooting..." "Shutdown -p" works fine.
I have updated bios to last version, and tried to boot with acpi disabled, but problem is still remains.
Also I tried to
sysctl hw.acpi.handle_reboot=1
and got
acpi0: reset failed - AE_BAD_ADDRESS
Rebooting...
It seems that I can't "debug" and figure out the reason.
Any suggestions?
---
With best regards,
Alexander Zinoviev.
-------------- next part --------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #2: Tue Apr 6 14:08:38 YEKST 2010
root at summer.trust20.local:/usr/obj/usr/src/sys/SUMMER
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a39000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2527007989 Hz
CPU: Intel(R) Celeron(R) CPU 2.53GHz (2527.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>
TSC: P-state invariant
Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128 entries
Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
1st-level data cache: 16 KB, 8-way set associative, sectored cache, 64 byte line size
Trace cache: 12K-uops, 8-way set associative
2nd-level cache: 256 KB, 4-way set associative, sectored cache, 64 byte line size
L2 cache: 256 kbytes, 4-way associative, 64 bytes/line
real memory = 268435456 (256 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000000dbbcfff, 217673728 bytes (53143 pages)
avail memory = 219316224 (209 MB)
Table 'FACP' at 0xdff3040
Table 'APIC' at 0xdff6780
MADT: Found table at 0xdff6780
MP Configuration Table version 1.4 found at 0xc00f1400
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
ACPI APIC Table: <AWARD AWRDACPI>
APIC: CPU 0 has ACPI ID 0
bios32: Found BIOS32 Service Directory header at 0xc00fb5f0
bios32: Entry = 0xfba70 (c00fba70) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xbae0
pnpbios: Found PnP BIOS data at 0xc00fc4f0
pnpbios: Entry = f0000:c520 Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
ACPI: RSDP 0xf71f0 00014 (v0 AWARD )
ACPI: RSDT 0xdff3000 0002C (v1 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 0xdff3040 00074 (v1 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 0xdff30c0 036BA (v1 AWARD AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 0xdff0000 00040
ACPI: APIC 0xdff6780 00068 (v1 AWARD AWRDACPI 42302E31 AWRD 00000000)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 1
ioapic0 <Version 1.4> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
npx0: INT 16 interface
acpi0: <AWARD AWRDACPI> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc1b4e000 pa 0x1000
pci_open(1): mode 1 addr port (0x0cf8) is 0x80001504
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=06611039)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.S962.PIRQ -> bus 0 dev 2 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.S962.PIR2 -> bus 0 dev 2 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, def0000 (3) failed
ACPI timer: 1/2 1/1 1/1 1/1 1/2 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 3 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x480-0x48f,0x1000-0x10df,0x10e0-0x10ff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1039, dev=0x0661, revid=0x11
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Memory, range 32, base 0xe8000000, size 26, enabled
found-> vendor=0x1039, dev=0x0003, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x0964, revid=0x36
domain=0, bus=0, slot=2, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x5513, revid=0x01
domain=0, bus=0, slot=2, func=5
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0x4000, size 4, enabled
found-> vendor=0x1039, dev=0x7012, revid=0xa0
domain=0, bus=0, slot=2, func=7
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=c, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xe000, size 8, enabled
map[14]: type I/O Port, range 32, base 0xe400, size 7, enabled
pcib0: matched entry for 0.2.INTC
pcib0: slot 2 INTC hardwired to IRQ 18
found-> vendor=0x1039, dev=0x7001, revid=0x0f
domain=0, bus=0, slot=3, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=5
map[10]: type Memory, range 32, base 0xed203000, size 12, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 20
found-> vendor=0x1039, dev=0x7001, revid=0x0f
domain=0, bus=0, slot=3, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=b, irq=10
map[10]: type Memory, range 32, base 0xed205000, size 12, enabled
pcib0: matched entry for 0.3.INTB
pcib0: slot 3 INTB hardwired to IRQ 21
found-> vendor=0x1039, dev=0x7001, revid=0x0f
domain=0, bus=0, slot=3, func=2
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=c, irq=11
map[10]: type Memory, range 32, base 0xed200000, size 12, enabled
pcib0: matched entry for 0.3.INTC
pcib0: slot 3 INTC hardwired to IRQ 22
found-> vendor=0x1039, dev=0x7002, revid=0x00
domain=0, bus=0, slot=3, func=3
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=9
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xed201000, size 12, enabled
pcib0: matched entry for 0.3.INTD
pcib0: slot 3 INTD hardwired to IRQ 23
found-> vendor=0x1039, dev=0x0900, revid=0x90
domain=0, bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xe800, size 8, enabled
map[14]: type Memory, range 32, base 0xed202000, size 12, enabled
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 19
found-> vendor=0x8086, dev=0x1229, revid=0x08
domain=0, bus=0, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xed204000, size 12, enabled
map[14]: type I/O Port, range 32, base 0xec00, size 6, enabled
map[18]: type Memory, range 32, base 0xed100000, size 20, enabled
pcib0: matched entry for 0.8.INTA
pcib0: slot 8 INTA hardwired to IRQ 17
agp0: <SiS 661 host to AGP bridge> on hostb0
hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe8000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xed000000-0xed0fffff
pcib1: prefetched decode 0xe0000000-0xe7ffffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1039, dev=0x6330, revid=0x00
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 27, enabled
pcib1: requested memory range 0xe0000000-0xe7ffffff: good
map[14]: type Memory, range 32, base 0xed000000, size 17, enabled
pcib1: requested memory range 0xed000000-0xed01ffff: good
map[18]: type I/O Port, range 32, base 0xd000, size 7, enabled
pcib1: requested I/O range 0xd000-0xd07f: in range
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xe0000000-0xe7ffffff,0xed000000-0xed01ffff irq 16 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 964 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4000-0x400f at device 2.5 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x4000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 49
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 50
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <multimedia, audio> at device 2.7 (no driver attached)
ohci0: <SiS 5571 USB controller> mem 0xed203000-0xed203fff irq 20 at device 3.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xed203000
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 51
ohci0: [MPSAFE]
ohci0: [ITHREAD]
usbus0: <SiS 5571 USB controller> on ohci0
ohci1: <SiS 5571 USB controller> mem 0xed205000-0xed205fff irq 21 at device 3.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xed205000
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 52
ohci1: [MPSAFE]
ohci1: [ITHREAD]
usbus1: <SiS 5571 USB controller> on ohci1
ohci2: <SiS 5571 USB controller> mem 0xed200000-0xed200fff irq 22 at device 3.2 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xed200000
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 53
ohci2: [MPSAFE]
ohci2: [ITHREAD]
usbus2: <SiS 5571 USB controller> on ohci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xed201000-0xed201fff irq 23 at device 3.3 on pci0
ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xed201000
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 54
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
sis0: <SiS 900 10/100BaseTX> port 0xe800-0xe8ff mem 0xed202000-0xed202fff irq 19 at device 4.0 on pci0
sis0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
miibus0: <MII bus> on sis0
rlphy0: <IC Plus 10/100 PHY> PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: bpf attached
sis0: Ethernet address: 00:15:58:1d:94:b0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 55
sis0: [MPSAFE]
sis0: [ITHREAD]
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xec00-0xec3f mem 0xed204000-0xed204fff,0xed100000-0xed1fffff irq 17 at device 8.0 on pci0
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xed204000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Dynamic Standby mode is disabled
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:d0:b7:4d:f4:f2
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 56
fxp0: [MPSAFE]
fxp0: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 57
fdc0: [FILTER]
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 59
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcffff,0xd0000-0xd0fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0 failed to probe at irq 7 on isa0
uart0 failed to probe at port 0x3f8 irq 4 on isa0
uart1 failed to probe at port 0x2f8 irq 3 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 66500191 hz
Timecounter "TSC" frequency 2527007989 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 initialized, divert enabled, nat enabled, rule-based forwarding enabled, default to accept, logging disabled
DUMMYNET with IPv6 initialized (040826)
lo0: bpf attached
ata0: Identifying devices: 00000001
ata0: New devices: 00000001
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ad0: setting PIO4 on 964 chip
ad0: setting UDMA133 on 964 chip
ad0: 39205MB <Maxtor 6K040L0 NAR61HA0> at ata0-master UDMA133
ad0: 80293248 sectors [79656C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ugen0.1: <SiS> at usbus0
uhub0: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <SiS> at usbus1
uhub1: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <SiS> at usbus2
uhub2: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <SiS> at usbus3
uhub3: <SiS EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub2: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ad0: Silicon Integrated Systems check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
ATA PseudoRAID loaded
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub3: 8 ports with 8 removable, self powered
Root mount waiting for: usbus3
ugen3.2: <JetFlash> at usbus3
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0x0100
Root mount waiting for: usbus3
umass0:0:0:-1: Attached to scbus0
Trying to mount root from ufs:/dev/ad0s1a
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(probe0:umass-sim0:0:0:0): (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
Retrying Command (per Sense Data)
(probe0:umass-sim0:0:0:0): Retrying Command
GEOM: new disk da0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <JetFlash Transcend 16GB 8.07> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 15320MB (31375360 512 byte sectors: 255H 63S/T 1953C)
ct_to_ts([2010-04-06 14:41:03]) = 1270564863.000000000
start_init: trying /sbin/init
GEOM: da0: partition 1 does not end on a track boundary.
-------------- next part --------------
hw.acpi.supported_sleep_state: S1 S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 0
hw.acpi.reset_video: 0
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.user_override: 0
hw.acpi.thermal.tz0.temperature: 30.0C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 68.0C
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 70.0C
hw.acpi.thermal.tz0._ACx: 68.0C -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz0._TC1: 4
hw.acpi.thermal.tz0._TC2: 3
hw.acpi.thermal.tz0._TSP: 60
hw.acpi.cpu.cx_lowest: C1
More information about the freebsd-acpi
mailing list