ACPI-0438: *** Error: Looking up [LNKC] in namespace, AE_NOT_FOUND
Tom
tomd2004 at gmail.com
Tue Jan 22 16:56:59 PST 2008
Hi,
I'm getting the following errors using a GENERIC 6.3-RELEASE kernel on amd64:
acpi0: <RS485 AWRDACPI> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21
ACPI-0438: *** Error: Looking up [LNKC] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000c8ebc0 StartNode 0xffffff0000c8ebc0 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKD] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000c8ea40 StartNode 0xffffff0000c8ea40 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKA] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000c8e8c0 StartNode 0xffffff0000c8e8c0 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKB] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000c8e740 StartNode 0xffffff0000c8e740 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKC] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000cd29c0 StartNode 0xffffff0000cd29c0 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKD] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000cd2840 StartNode 0xffffff0000cd2840 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKA] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000cd26c0 StartNode 0xffffff0000cd26c0 ReturnNode 0
acpi0: Power Button (fixed)
ACPI-0381: *** Error: Looking up [_PCT] in namespace, AE_ALREADY_EXISTS
ACPI-1304: *** Error: Method execution failed [\\_SB_.MEM_._CRS]
(Node 0xffffff0000c95a00), AE_ALREADY_EXISTS
ACPI-0239: *** Error: Method execution failed [\\_SB_.MEM_._CRS]
(Node 0xffffff0000c95a00), AE_ALREADY_EXISTS
can't fetch resources for \\_SB_.MEM_ - AE_ALREADY_EXISTS
Is this anything to worry about? Below is a full dmesg, please let me
know if there is anymore information I an provide.
Regards
Tom
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-RELEASE #0: Wed Jan 16 01:43:02 UTC 2008
root at palmer.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
ACPI APIC Table: <RS485 AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2299.75-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x60fb1 Stepping = 1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
Cores per package: 2
real memory = 1039007744 (990 MB)
avail memory = 989507584 (943 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Jan 16 2008 01:41:13)
acpi0: <RS485 AWRDACPI> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21
ACPI-0438: *** Error: Looking up [LNKC] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000c8ebc0 StartNode 0xffffff0000c8ebc0 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKD] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000c8ea40 StartNode 0xffffff0000c8ea40 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKA] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000c8e8c0 StartNode 0xffffff0000c8e8c0 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKB] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000c8e740 StartNode 0xffffff0000c8e740 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKC] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000cd29c0 StartNode 0xffffff0000cd29c0 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKD] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000cd2840 StartNode 0xffffff0000cd2840 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKA] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000cd26c0 StartNode 0xffffff0000cd26c0 ReturnNode 0
acpi0: Power Button (fixed)
ACPI-0381: *** Error: Looking up [_PCT] in namespace, AE_ALREADY_EXISTS
ACPI-1304: *** Error: Method execution failed [\\_SB_.MEM_._CRS]
(Node 0xffffff0000c95a00), AE_ALREADY_EXISTS
ACPI-0239: *** Error: Method execution failed [\\_SB_.MEM_._CRS]
(Node 0xffffff0000c95a00), AE_ALREADY_EXISTS
can't fetch resources for \\_SB_.MEM_ - AE_ALREADY_EXISTS
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
atapci0: <ATI IXP400 SATA150 controller> port
0xfe00-0xfe07,0xfd00-0xfd03,0xfc00-0xfc07,0xfb00-0xfb03,0xfa00-0xfa0f
mem 0xfe02f000-0xfe02f1ff irq 23 at device 17.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <ATI IXP400 SATA150 controller> port
0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf50f
mem 0xfe02e000-0xfe02e1ff irq 22 at device 18.0 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
ohci0: <ATI SB400 USB Controller> mem 0xfe02d000-0xfe02dfff irq 19 at
device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <ATI SB400 USB Controller> mem 0xfe02c000-0xfe02cfff irq 19 at
device 19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <ATI SB400 USB 2.0 controller> mem 0xfe02b000-0xfe02bfff irq 19
at device 19.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: waiting for BIOS to give up control
usb2: timed out waiting for BIOS
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <ATI SB400 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
umass0: Generic USB2.0-CRW, rev 2.00/11.22, addr 2
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci2: <ATI IXP400 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf300-0xf30f at device 20.1 on
pci0
ata0: <ATA channel 0> on atapci2
ata1: <ATA channel 1> on atapci2
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xde00-0xdeff mem
0xfddff000-0xfddff0ff irq 22 at device 5.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:19:21:3a:67:6c
pci0: <multimedia, audio> at device 20.5 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7
drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub0: device problem (SET_ADDR_FAILED), disabling port 2
ukbd0: vendor 0x1241 USB Keyboard, rev 1.10/2.90, addr 2, iclass 3/1
kbd2 at ukbd0
uhid0: vendor 0x1241 USB Keyboard, rev 1.10/2.90, addr 2, iclass 3/1
Timecounters tick every 1.000 msec
hptrr: no controller detected.
ad8: 152627MB <WDC WD1600JS-00NCB1 10.02E02> at ata4-master SATA150
acd0: DVDR <ATAPI DVD A DH20A1S/UX11> at ata5-master SATA150
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad8s1a
More information about the freebsd-acpi
mailing list