ACPI errors in dmesg

Sean Bruno sbruno at miralink.com
Thu Feb 28 21:15:52 UTC 2008


KAYVEN RIESE wrote:
>
> On Thu, 28 Feb 2008, Sean Bruno wrote:
>> KAYVEN RIESE wrote:
>>>
>>> I have ACPI errors in my dmesg, and I don't know what to do about
>>> it.  Do I need new hardware?  If so, can I get more specific 
>>> information?
>>> How do I fix this?
>>>
>>> Follows is the first part of dmesg with the errors:
>>>
>>>
>>> kv_bsd#dmesg
>>> Copyright (c) 1992-2007 The FreeBSD Project.
>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 
>>> 1994
>>>         The Regents of the University of California. All rights 
>>> reserved.
>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>> FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
>>>     root at dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
>>> Timecounter "i8254" frequency 1193182 Hz quality 0
>>> CPU: Intel(R) Pentium(R) M processor 1.73GHz (600.02-MHz 686-class CPU)
>>>   Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
>>>
>>> Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> 
>>>
>>>   Features2=0x180<EST,TM2>
>>>   AMD Features=0x100000<NX>
>>> real memory  = 1072955392 (1023 MB)
>>> avail memory = 1040961536 (992 MB)
>>> kbd1 at kbdmux0
>>> ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, 
>>> RF5413)
>>> acpi0: <A M I OEMRSDT> on motherboard
>>>     ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
>>>     ACPI-1304: *** Error: Method execution failed 
>>> [\\_SB_.PCI0.SBRG.EC0_.ACS_] (Node 0xc4ba8440), AE_NOT_EXIST
>>>     ACPI-1304: *** Error: Method execution failed [\\_SB_.AC__._INI] 
>>> (Node 0xc4bac0a0), AE_NOT_EXIST
>>>     ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
>>>     ACPI-1304: *** Error: Method execution failed 
>>> [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc4ba8420), AE_NOT_EXIST
>>>     ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] 
>>> (Node 0xc4baf420), AE_NOT_EXIST
>>>     ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] 
>>> (Node 0xc4baf420), AE_NOT_EXIST
>>> acpi0: Power Button (fixed)
>>>     ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
>>>     ACPI-1304: *** Error: Method execution failed 
>>> [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc4ba8420), AE_NOT_EXIST
>>>     ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] 
>>> (Node 0xc4baf420), AE_NOT_EXIST
>>>     ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] 
>>> (Node 0xc4baf420), AE_NOT_EXIST
>>> ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
>>>     ACPI-1304: *** Error: Method execution failed 
>>> [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc4ba8420), AE_NOT_EXIST
>>>     ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] 
>>> (Node 0xc4baf420), AE_NOT_EXIST
>>>     ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] 
>>> (Node 0xc4baf420), AE_NOT_EXIST
>>>     ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
>>>     ACPI-1304: *** Error: Method execution failed 
>>> [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc4ba8420), AE_NOT_EXIST
>>>     ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] 
>>> (Node 0xc4baf420), AE_NOT_EXIST
>>>     ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] 
>>> (Node 0xc4baf420), AE_NOT_EXIST
>>>     ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
>>>     ACPI-1304: *** Error: Method execution failed 
>>> [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc4ba8420), AE_NOT_EXIST
>>>     ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] 
>>> (Node 0xc4baf420), AE_NOT_EXIST
>>>     ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] 
>>> (Node 0xc4baf420), AE_NOT_EXIST
>>>  ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
>>>     ACPI-1304: *** Error: Method execution failed 
>>> [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc4ba8420), AE_NOT_EXIST
>>>     ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] 
>>> (Node 0xc4baf420), AE_NOT_EXIST
>>>     ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] 
>>> (Node 0xc4baf420), AE_NOT_EXIST
>>>     ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
>>>     ACPI-1304: *** Error: Method execution failed 
>>> [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc4ba8420), AE_NOT_EXIST
>>>     ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] 
>>> (Node 0xc4baf420), AE_NOT_EXIST
>>>     ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] 
>>> (Node 0xc4baf420), AE_NOT_EXIST
>>>     ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
>>>     ACPI-1304: *** Error: Method execution failed 
>>> [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc4ba8420), AE_NOT_EXIST
>>>     ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] 
>>> (Node 0xc4baf420), AE_NOT_EXIST
>>>     ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] 
>>> (Node 0xc4baf420), AE_NOT_EXIST
>>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>>>
>> Can you please post your motherboard model and BIOS revision?
>
> I'm not really sure how to do that, but here is a free photoserver
> where I have pictures of my BIOS:
>
> http://www.monkeyview.net/id/965/fsck/bios/index.vhtml
>
> (click on one of the more interesting of the 49 photos there for
> a better look)
>
> Here is a super album with more pictures:
>
> http://www.monkeyview.net/id/965/fsck/index.vhtml
>
> Will the rest of the dmesg output help?  Here that is
>
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xefffffff at 
> device 0.0 o
> n pci0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f 
> irq 11 at
> device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f 
> irq 5 at d
> evice 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f 
> irq 10 at
> device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 
> 0xffaffc00-0xffafffff i
> rq 10 at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> usb3: EHCI version 1.0
> usb3: companion controllers, 2 ports each: usb0 usb1 usb2
> usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
> usb3: USB revision 2.0
> uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> bge0: <Broadcom BCM5705 A3, ASIC rev. 0x3003> mem 
> 0xff9f0000-0xff9fffff irq 4 at
>  device 0.0 on pci2
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
> 1000baseTX
> -FDX, auto
> bge0: Ethernet address: 00:11:d8:22:c9:91
> cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci2
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> cbb1: <RF5C476 PCI-CardBus Bridge> at device 1.1 on pci2
> cardbus1: <CardBus bus> on cbb1
> pccard1: <16-bit PCCard bus> on cbb1
> fwohci0: <Ricoh R5C552> mem 0xff9ef800-0xff9effff irq 10 at device 1.2 
> on pci2
> fwohci0: OHCI version 1.0 (ROM=1)
> fwohci0: No. of Isochronous channels is 4.
> fwohci0: EUI64 00:e0:18:00:03:26:4c:e9
> fwohci0: Phy 1394a available S400, 2 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> fwe0: <Ethernet over FireWire> on firewire0
> if_fwe0: Fake Ethernet address: 02:e0:18:26:4c:e9
> fwe0: Ethernet address: 02:e0:18:26:4c:e9
> fwe0: if_start running deferred for Giant
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> fwohci0: Initiate bus reset
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> pci2: <network> at device 2.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH4 UDMA100 controller> port 
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
> 6,0xffa0-0xffaf at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pcm0: <Intel ICH4 (82801DB)> port 0xee00-0xeeff,0xe000-0xe03f mem 
> 0xffaff800-0xf
> faff9ff,0xffaff400-0xffaff4ff irq 4 at device 31.5 on pci0
> pcm0: <SigmaTel STAC9750/51 AC97 Codec>
> pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Sleep Button> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> battery0: <ACPI Control Method Battery> on acpi0
> battery1: <ACPI Control Method Battery> on acpi0
> acpi_button1: <Power Button> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0
> sio0: configured irq 3 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0
> sio0: type 16550A
> ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 
> drq 3 on ac
> pi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> pmtimer0 on isa0
> orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ums0: Logitech USB Optical Mouse, rev 2.00/43.01, addr 2, iclass 3/1
> ums0: 8 buttons and Z dir.
> Timecounter "TSC" frequency 600024447 Hz quality 800
> Timecounters tick every 1.000 msec
> ad0: 114473MB <Hitachi HTS541612J9AT00 SBDOA70H> at ata0-master UDMA100
> acd0: DVDR <TSSTcorpCD/DVDW TS-L532A/TC51> at ata1-master UDMA33
> Trying to mount root from ufs:/dev/ad0s2a
> bge0: link state changed to DOWN
> cpu0: Cx states changed
> cpu0: Cx states changed
> bge0: link state changed to UP
> pid 54590 (npviewer.bin), uid 1001: exited on signal 11 (core dumped)
>
>
>>
>> Sean
>>
>>
>
> *----------------------------------------------------------*
>   Kayven Riese, BSCS, MS (Physiology and Biophysics)
>   (415) 902 5513 cellular
>   http://kayve.net
>   Webmaster http://ChessYoga.org
> *----------------------------------------------------------*
Ok, your BIOS version is 0208 I think.  Who made your computer?  Maybe 
from the make and model of the computer we can determine if there is a 
BIOS update for it.

Sean


More information about the freebsd-acpi mailing list