Problem rebooting FreeBSD 7

Thu Feb 28 13:49:36 UTC 2008

Hi, I have problem with rebooting a FreeBSD. Most of the times it hangs up waiting on CPUs to stop.
Feb 27 19:49:40 ceiling reboot: rebooted by xxxxx
Feb 27 19:49:40 ceiling syslogd: exiting on signal 15
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 0 1 0 0 done
All buffers synced.
Uptime: 11h51m4s
Rebooting...
cpu_reset: Stopping other CPUs  Tried with hw.acpi.disable_on_reboot and hw.acpi.handle_reboot but did not help. But I can power down PC. Any suggestion is appreciated,Bostjan  Copyright (c) 1992-2008 The FreeBSD Project.Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994        The Regents of the University of California. All rights reserved.FreeBSD is a registered trademark of The FreeBSD Foundation.FreeBSD 7.0-PRERELEASE #9: Tue Feb 26 20:21:27 CET 2008Timecounter "i8254" frequency 1193182 Hz quality 0CPU: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz (2400.02-MHz K8-class CPU)  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>  AMD Features=0x20100800<SYSCALL,NX,LM>  AMD Features2=0x1<LAHF>  Cores per package: 4usable memory = 4277628928 (4079 MB)avail memory  = 4116414464 (3925 MB)ACPI APIC Table: <GBT    GBTUACPI>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID:  0 cpu1 (AP): APIC ID:  1 cpu2 (AP): APIC ID:  2 cpu3 (AP): APIC ID:  3ioapic0: Changing APIC ID to 2ioapic0 <Version 2.0> irqs 0-23 on motherboardacpi0: <GBT GBTUACPI> on motherboardacpi0: [ITHREAD]acpi0: Power Button (fixed)acpi0: reservation of 0, a0000 (3) failedacpi0: reservation of 100000, cf4e0000 (3) failedTimecounter "ACPI-fast" frequency 3579545 Hz quality 1000acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0Timecounter "HPET" frequency 14318180 Hz quality 900cpu0: <ACPI CPU> on acpi0acpi_perf0: <ACPI CPU Frequency Control> on cpu0p4tcc0: <CPU Frequency Thermal Control> on cpu0cpu1: <ACPI CPU> on acpi0est1: <Enhanced SpeedStep Frequency Control> on cpu1est: CPU supports Enhanced Speedstep, but is not recognized.est: cpu_vendor GenuineIntel, msr 920092006000920device_attach: est1 attach returned 6p4tcc1: <CPU Frequency Thermal Control> on cpu1cpu2: <ACPI CPU> on acpi0est2: <Enhanced SpeedStep Frequency Control> on cpu2est: CPU supports Enhanced Speedstep, but is not recognized.est: cpu_vendor GenuineIntel, msr 920092006000920device_attach: est2 attach returned 6p4tcc2: <CPU Frequency Thermal Control> on cpu2cpu3: <ACPI CPU> on acpi0est3: <Enhanced SpeedStep Frequency Control> on cpu3est: CPU supports Enhanced Speedstep, but is not recognized.est: cpu_vendor GenuineIntel, msr 920092006000920device_attach: est3 attach returned 6p4tcc3: <CPU Frequency Thermal Control> on cpu3acpi_button0: <Power Button> on acpi0pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0pci0: <ACPI PCI bus> on pcib0vgapci0: <VGA-compatible display> port 0xe200-0xe207 mem 0xf3200000-0xf327ffff,0xe0000000-0xefffffff,0xf3000000-0xf30fffff irq 16 at device 2.0 on pci0pci0: <serial bus, USB> at device 26.0 (no driver attached)pci0: <serial bus, USB> at device 26.1 (no driver attached)pci0: <serial bus, USB> at device 26.2 (no driver attached)pci0: <serial bus, USB> at device 26.7 (no driver attached)pci0: <multimedia> at device 27.0 (no driver attached)pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0pci1: <ACPI PCI bus> on pcib1pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0pci2: <ACPI PCI bus> on pcib2atapci0: <JMicron JMB368 UDMA133 controller> port 0xc000-0xc007,0xc100-0xc103,0xc200-0xc207,0xc300-0xc303,0xc400-0xc40f irq 16 at device 0.0 on pci2atapci0: [ITHREAD]ata2: <ATA channel 0> on atapci0ata2: [ITHREAD]pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0pci3: <ACPI PCI bus> on pcib3re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf2000000-0xf2000fff irq 17 at device 0.0 on pci3re0: Using 2 MSI messagesmiibus0: <MII bus> on re0rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, autore0: Ethernet address: 00:1a:4d:58:3c:d5re0: [FILTER]re0: [FILTER]pci0: <serial bus, USB> at device 29.0 (no driver attached)pci0: <serial bus, USB> at device 29.1 (no driver attached)pci0: <serial bus, USB> at device 29.2 (no driver attached)pci0: <serial bus, USB> at device 29.7 (no driver attached)pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0pci4: <ACPI PCI bus> on pcib4pci4: <serial bus, FireWire> at device 7.0 (no driver attached)isab0: <PCI-ISA bridge> at device 31.0 on pci0isa0: <ISA bus> on isab0atapci1: <Intel ICH9 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f,0xfc00-0xfc0f at device 31.2 on pci0ata0: <ATA channel 0> on atapci1ata0: [ITHREAD]ata1: <ATA channel 1> on atapci1ata1: [ITHREAD]pci0: <serial bus, SMBus> at device 31.3 (no driver attached)atapci2: <Intel ICH9 SATA300 controller> port 0xe800-0xe807,0xe900-0xe903,0xea00-0xea07,0xeb00-0xeb03,0xec00-0xec0f,0xed00-0xed0f irq 19 at device 31.5 on pci0atapci2: [ITHREAD]ata3: <ATA channel 0> on atapci2ata3: [ITHREAD]ata4: <ATA channel 1> on atapci2ata4: [ITHREAD]sio0: configured irq 4 not in bitmap of probed irqs 0sio0: port may not be enabledsio0: configured irq 4 not in bitmap of probed irqs 0sio0: port may not be enabledsio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0sio0: type 16550A, consolesio0: [FILTER]sio1: configured irq 3 not in bitmap of probed irqs 0sio1: port may not be enabledsio1: configured irq 3 not in bitmap of probed irqs 0sio1: port may not be enabledsio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0sio1: type 16550Asio1: [FILTER]atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0atkbd0: <AT Keyboard> irq 1 on atkbdc0kbd0 at atkbd0atkbd0: [GIANT-LOCKED]atkbd0: [ITHREAD]sc0: <System console> at flags 0x100 on isa0sc0: VGA <16 virtual consoles, flags=0x300>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0Timecounters tick every 1.000 msecad0: 381553MB <Seagate ST3400620AS 3.AAD> at ata0-master SATA300acd0: DVDR <TSSTcorp CDDVDW SH-S203D/SB00> at ata1-master SATA150SMP: AP CPU #1 Launched!SMP: AP CPU #3 Launched!SMP: AP CPU #2 Launched!Trying to mount root from ufs:/dev/ad0s1are0: link state changed to UPpid 619 (ntpd), uid 0: exited on signal 11 (core dumped)re0: link state changed to DOWNre0: link state changed to UPre0: link state changed to DOWNre0: link state changed to UP

Express yourself instantly with MSN Messenger! MSN Messenger 
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/