shutdown does not power down
Unga
unga888 at yahoo.com
Wed Dec 10 23:14:15 PST 2008
--- On Thu, 12/11/08, Nate Lawson <nate at root.org> wrote:
> >> Are you sure devfs is not just hiding it since it
> >> wasn't used yet?
> >> devfs unhide or touch /dev/acpi would probably
> reveal it.
> >>
> >
> >> Are you sure ACPI is attaching?
> > Not sure. but
> > sysctl -a | grep acpi
> > shows lot of acpi info
> >
> > sysctl hw.acpi
> > sysctl: unknown oid 'hw.acpi'
>
> Just post the output of dmesg after booting.
>
Below is the dmesg verbose output.
I earlier wrote that "sysctl -a | grep acpi" shows lot of lines, that's because I manually created the /dev/acpi node before booting. Since it's get hidden after mount the devfs and cannot unhide, I removed it. Now "sysctl -a | grep acpi" is empty.
Please let me know if you need further information. I really want to understand what causing that /dev/acpi does not created.
Best regards
Unga
===========================
dmesg output - verbose (boot -v)
===========================
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-STABLE #0: Wed Dec 10 13:37:07 SGT 2008
root at grey.lan:/usr/obj/usr/src/sys/MYKERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0cf4000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0cf4194.
Calibrating clock(s) ... i8254 clock: 1193205 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3028309532 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3028.31-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNXT-ID,xTPR>
Logical CPUs per core: 2
Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries
Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte line size
Trace cache: 12K-uops, 8-way set associative
2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte line size
real memory = 1610547200 (1535 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001025000 - 0x000000005e4a3fff, 1564995584 bytes (382079 pages)
avail memory = 1564483584 (1492 MB)
MP Configuration Table version 1.4 found at 0xc00f5bc0
APIC: Using the MPTable enumerator.
SMP: Added CPU 0 (BSP)
MPTable: <INTEL I865G/GE/PE >
bios32: Found BIOS32 Service Directory header at 0xc00fdb50
bios32: Entry = 0xfdb60 (c00fdb60) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdb81
pnpbios: Found PnP BIOS data at 0xc00f7020
pnpbios: Entry = f0000:5e0b Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ioapic0: Assuming intbase of 0
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: Routing IRQ 0 -> intpin 2
lapic: Routing ExtINT -> LINT0
lapic: Routing NMI -> LINT1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Dec 10 2008 13:36:44)
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25708086)
pcibios: BIOS version 2.10
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2570, revid=0x02
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Prefetchable Memory, range 32, base 0xf8000000, size 26, enabled
found-> vendor=0x8086, dev=0x2571, revid=0x02
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0d (3250 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d2, revid=0x02
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0xe000, size 5, enabled
pcib0: slot 29 INTA routed to irq 16
found-> vendor=0x8086, dev=0x24d4, revid=0x02
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[20]: type I/O Port, range 32, base 0xe400, size 5, enabled
pcib0: slot 29 INTB routed to irq 19
found-> vendor=0x8086, dev=0x24d7, revid=0x02
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
map[20]: type I/O Port, range 32, base 0xe800, size 5, enabled
pcib0: slot 29 INTC routed to irq 18
found-> vendor=0x8086, dev=0x24de, revid=0x02
domain=0, bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0xec00, size 5, enabled
pcib0: slot 29 INTA routed to irq 16
found-> vendor=0x8086, dev=0x24dd, revid=0x02
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfebff800, size 10, enabled
pcib0: slot 29 INTD routed to irq 23
found-> vendor=0x8086, dev=0x244e, revid=0xc2
domain=0, bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d1, revid=0x02
domain=0, bus=0, slot=31, func=2
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02a8, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type I/O Port, range 32, base 0xfc00, size 4, enabled
found-> vendor=0x8086, dev=0x24d3, revid=0x02
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type I/O Port, range 32, base 0xc00, size 5, enabled
pcib0: slot 31 INTB routed to irq 17
agp0: <Intel 82865 host to AGP bridge> on hostb0
hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
agp0: allocating GATT for aperture of size 64M
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfc900000-0xfe9fffff
pcib1: prefetched decode 0xe7f00000-0xf7efffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x0322, revid=0xa1
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfd000000, size 24, enabled
pcib1: requested memory range 0xfd000000-0xfdffffff: good
map[14]: type Prefetchable Memory, range 32, base 0xe8000000, size 27, enabled
pcib1: requested memory range 0xe8000000-0xefffffff: good
pcib1: slot 0 INTA routed to irq 16
vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xe8000000-0xefffffff irq 16 at device 0.0 on pci1
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xe000-0xe01f irq 16 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 48
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xe400-0xe41f irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 49
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xe800-0xe81f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe800
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 50
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xec00-0xec1f irq 16 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xec00
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfebff800-0xfebffbff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfebff800
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 51
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xc000-0xcfff
pcib2: memory decode 0xfea00000-0xfeafffff
pcib2: no prefetched decode
pcib2: Subtractively decoded bridge.
pci2: <PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x1412, dev=0x1724, revid=0x01
domain=0, bus=2, slot=2, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 1 supports D0 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xcc00, size 5, enabled
pcib2: requested I/O range 0xcc00-0xcc1f: in range
map[14]: type I/O Port, range 32, base 0xc800, size 7, enabled
pcib2: requested I/O range 0xc800-0xc87f: in range
pcib2: slot 2 INTA routed to irq 18
found-> vendor=0x1737, dev=0x1032, revid=0x10
domain=0, bus=2, slot=3, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xc400, size 8, enabled
pcib2: requested I/O range 0xc400-0xc4ff: in range
map[14]: type Memory, range 32, base 0xfeafff00, size 8, enabled
pcib2: requested memory range 0xfeafff00-0xfeafffff: good
pcib2: slot 3 INTA routed to irq 19
pci2: <multimedia, audio> at device 2.0 (no driver attached)
re0: <Linksys EG1032 (RTL8169S) Gigabit Ethernet> port 0xc400-0xc4ff mem 0xfeafff00-0xfeafffff irq 19 at device 3.0 on pci2
re0: Reserved 0x100 bytes for rid 0x14 type 3 at 0xfeafff00
re0: Chip rev. 0x04000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:18:f8:0f:8e:ab
re0: [MPSAFE]
re0: [FILTER]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 52
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 53
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0 on motherboard
p4tcc0: <CPU Frequency Thermal Control> on cpu0
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pnpbios: 15 devices, largest 126 bytes
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0a03: adding io range 0x22-0x22, size=0x1, align=0x1
PNP0a03: adding io range 0x72-0x75, size=0x4, align=0x1
PNP0a03: adding io range 0x290-0x297, size=0x8, align=0x1
PNP0a03: adding io range 0x400-0x43f, size=0x40, align=0x1
PNP0a03: adding io range 0x800-0x87f, size=0x80, align=0x1
PNP0a03: adding io range 0x2e-0x2e, size=0x1, align=0x1
PNP0a03: adding io range 0x2f-0x2f, size=0x1, align=0x1
pnpbios: handle 0 device ID PNP0a03 (030ad041)
PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00
PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0x5ffeffff, size=0x5fef0000
PNP0c01: adding fixed memory32 range 0x5fff0000-0x5fff7fff, size=0x8000
PNP0c01: adding fixed memory32 range 0x5fff8000-0x5fffffff, size=0x8000
PNP0c01: adding fixed memory32 range 0xfec00000-0xfec00fff, size=0x1000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0200: adding dma mask 0x10
PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1
PNP0200: adding fixed io range 0x80-0x90, size=0x11, align=0x1
PNP0200: adding fixed io range 0x94-0x9f, size=0xc, align=0x1
PNP0200: adding fixed io range 0xc0-0xde, size=0x1f, align=0x1
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding fixed io range 0x70-0x71, size=0x2, align=0x1
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 7 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
pnpbios: handle 9 device ID PNP0501 (0105d041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x8
pnpbios: handle 10 device ID PNP0501 (0105d041)
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0x4
PNP0400: adding irq mask 0x80
pnpbios: handle 11 device ID PNP0400 (0004d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x4
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 12 device ID PNP0700 (0007d041)
INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000
pnpbios: handle 13 device ID INT0800 (0008d425)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 14 device ID PNP0f13 (130fd041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xe0000-0xe0fff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 54
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 55
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 56
ppbus0: [MPSAFE]
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x4001 0x4011 0x4001 0x4001
sio0: irq maps: 0x4001 0x4011 0x4001 0x4001
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
sio0: [FILTER]
sio1: irq maps: 0x4001 0x4009 0x4001 0x4001
sio1: irq maps: 0x4001 0x4009 0x4001 0x4001
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 58
sio1: [FILTER]
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9fbff pnpid PNP0c01 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 pnpid PNP0303 on isa0
unknown: <PNP0800> failed to probe at port 0x61 pnpid PNP0800 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff pnpid PNP0501 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff pnpid PNP0501 on isa0
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0400> at port 0x378-0x37f pnpid PNP0400 on isa0
unknown: <PC standard floppy controller> failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 pnpid PNP0700 on isa0
unknown: <INT0800> failed to probe at iomem 0xffb80000-0xffbfffff pnpid INT0800 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 pnpid PNP0f13 on isa0
Device configuration finished.
Reducing kern.maxvnodes 101915 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100943666 hz
Timecounter "TSC" frequency 3028309532 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: 78533MB <IC35L080AVVA07 0 VA4OA52A> at ata0-master UDMA100
ad0: 160836480 sectors [39420C/16H/255S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad2: 238475MB <Seagate ST3250410AS 3.AAC> at ata1-master SATA150
ad2: 488397168 sectors [119705C/16H/255S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad2
ad2: Intel check1 failed
ad2: Adaptec check1 failed
ad2: LSI (v3) check1 failed
ad2: LSI (v2) check1 failed
ad2: FreeBSD check1 failed
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad2s1a
start_init: trying /sbin/init
===========================
End of dmesg output - verbose
===========================
More information about the freebsd-acpi
mailing list