Video doesn't work after resume (Latitude D410)

[Imobach Gonzalez Sosa]

Hi all,

I've managed to publish the boot and ASL files. I hope I can mantain 
them published enough time. Here are the URLs:

http://www.banot.net/~imobachgs/freebsd/boot.txt
http://www.banot.net/~imobachgs/freebsd/imo-DellD410.asl

Thank you in advance.
>
>  > Here's the output of "sysctl hw.acpi":
>  > 
>  > hw.acpi.supported_sleep_state: S3 S4 S5
>  > hw.acpi.power_button_state: S5
>  > hw.acpi.sleep_button_state: S3
>  > hw.acpi.lid_switch_state: NONE
>  > hw.acpi.standby_state: S1
>  > hw.acpi.suspend_state: S3
>  > hw.acpi.sleep_delay: 1
>  > hw.acpi.s4bios: 1
>  > hw.acpi.verbose: 1
>  > hw.acpi.disable_on_reboot: 0
>  > hw.acpi.handle_reboot: 0
>  > hw.acpi.reset_video: 0
>  > hw.acpi.cpu.cx_lowest: C1
>  > hw.acpi.acline: 1
>  > hw.acpi.battery.life: 100
>  > hw.acpi.battery.time: -1
>  > hw.acpi.battery.state: 0
>  > hw.acpi.battery.units: 2
>  > hw.acpi.battery.info_expire: 5
>  > hw.acpi.video.tv0.active: 0
>  > hw.acpi.video.crt0.active: 0
>  > hw.acpi.video.lcd0.active: 0
>  > hw.acpi.video.ext0.active: 0
>  > hw.acpi.thermal.min_runtime: 0
>  > hw.acpi.thermal.polling_rate: 10
>  > hw.acpi.thermal.user_override: 0
>  > hw.acpi.thermal.tz0.temperature: 60.5C
>  > hw.acpi.thermal.tz0.active: -1
>  > hw.acpi.thermal.tz0.passive_cooling: 0
>  > hw.acpi.thermal.tz0.thermal_flags: 0
>  > hw.acpi.thermal.tz0._PSV: -1
>  > hw.acpi.thermal.tz0._HOT: -1
>  > hw.acpi.thermal.tz0._CRT: 100.0C
>  > hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
>  > 
>  > Any idea? Let me know if I can do something to help.
>  > 
>  > Thanks in advance.
>  > 
>  > [1] http://lists.freebsd.org/pipermail/freebsd-acpi/2008-April/004804.html

--
Imobach González Sosa
Banot.net
http://www.banot.net/