Problem with ACPI using Abit BE6-II V2.0
Zbigniew Baniewski
zb at ispid.com.pl
Sun Apr 20 14:09:24 UTC 2008
According to tips found on
http://www.freebsd.org/doc/en/books/handbook/acpi-debug.html
I'm sending a report about problems when trying to use ACPI on Abit BE6-II
V2.0, FreeBSD 7.0.
When ACPI is enabled - and I've enabled it during installation - the most
noticeable inconveniences are:
1. There's no top's "CPU states" anymore; all the output in that line is
zeroed. The same when trying to use htop or gkrellm - no possibility to
watch the CPU load.
2. There are steady problems with responsitivity of the system; even the
loading of the application of moderate size (like Firefox) always are
causing "momentary freezes" (f.e. mouse cursor can't be moved for a while).
3. When booted with "verbose", there are steadily error messages printed on
first console:
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
None of the problems described above, when ACPI has been disabled.
Link to ACPI Source Language file:
ftp://ftp.ispid.com.pl/free/zb-abitbe6ii.asl
--------------- dmesg output with ACPI enabled ----------------------
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #2: Sat Apr 19 20:53:27 CEST 2008
root at sarge.my.own.domain.no-net:/usr/obj/usr/src/sys/SARGE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09f3000.
Preloaded elf module "/boot/kernel/snd_emu10kx.ko" at 0xc09f3160.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc09f3210.
Preloaded elf module "/boot/kernel/bktr.ko" at 0xc09f32bc.
Preloaded elf module "/boot/kernel/bktr_mem.ko" at 0xc09f3368.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09f3418.
Calibrating clock(s) ... i8254 clock: 1193348 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 400911913 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
Instruction TLB: 4 KB pages, 4-way set associative, 32 entries
Instruction TLB: 4 MB pages, fully associative, 2 entries
Data TLB: 4 KB pages, 4-way set associative, 64 entries
2nd-level cache: 512 KB, 4-way set associative, 32 byte line size
1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size
Data TLB: 4 MB Pages, 4-way set associative, 8 entries
1st-level data cache: 16 KB, 4-way set associative, 32 byte line size
real memory = 268369920 (255 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000000fb2dfff, 250646528 bytes (61193 pages)
avail memory = 253034496 (241 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fb080
bios32: Entry = 0xfb4f0 (c00fb4f0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb520
pnpbios: Found PnP BIOS data at 0xc00fbed0
pnpbios: Entry = f0000:bf00 Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
bktr_mem: memory holder loaded
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
ACPI: RSDP @ 0x0xf70a0/0x0014 (v 0 IntelR)
ACPI: RSDT @ 0x0xfff3000/0x002C (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000)
ACPI: FACP @ 0x0xfff3040/0x0074 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000)
ACPI: DSDT @ 0x0xfff30c0/0x2311 (v 1 INTELR AWRDACPI 0x00001000 MSFT 0x0100000C)
ACPI: FACS @ 0x0xfff0000/0x0040
ACPI: BOOT @ 0x0xfff5400/0x0028 (v 1 IntelR 0x00000000 0x00000000)
npx0: INT 16 interface
acpi0: <IntelR AWRDACPI> on motherboard
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc6d80000 pa 0x1000
atpic: Programming IRQ9 as level/low
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIRQ -> bus 0 dev 7 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, fef0000 (3) failed
ACPI timer: 0/3 1/2 0/4 0/3 1/2 0/3 0/3 0/4 0/4 0/3 -> 2
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 12 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 12 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 14 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 14 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x4010
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x4041,0x5000-0x500f on acpi0
ACPI: Found matching pin for 0.17.INTA at func 0: 12
ACPI: Found matching pin for 0.15.INTA at func 0: 11
ACPI: Found matching pin for 0.13.INTA at func 3: 14
ACPI: Found matching pin for 0.13.INTB at func 0: 10
ACPI: Found matching pin for 0.13.INTC at func 1: 12
ACPI: Found matching pin for 0.13.INTD at func 2: 11
ACPI: Found matching pin for 0.11.INTA at func 0: 10
ACPI: Found matching pin for 0.9.INTA at func 0: 11
ACPI: Found matching pin for 0.9.INTB at func 2: 12
ACPI: Found matching pin for 0.7.INTD at func 2: 10
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x7190, revid=0x03
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 26, enabled
found-> vendor=0x8086, dev=0x7191, revid=0x03
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x02
domain=0, bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7111, revid=0x01
domain=0, bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type I/O Port, range 32, base 0xf000, size 4, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
domain=0, bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
map[20]: type I/O Port, range 32, base 0xc000, size 5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.LNKD:0)
pcib0: slot 7 INTD routed to irq 10 via \\_SB_.PCI0.LNKD
found-> vendor=0x8086, dev=0x7113, revid=0x02
domain=0, bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[90]: type I/O Port, range 32, base 0x5000, size 4, enabled
found-> vendor=0x1102, dev=0x0004, revid=0x03
domain=0, bus=0, slot=9, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xc400, size 5, enabled
pcib0: matched entry for 0.9.INTA (src \\_SB_.PCI0.LNKB:0)
pcib0: slot 9 INTA routed to irq 11 via \\_SB_.PCI0.LNKB
found-> vendor=0x1102, dev=0x7003, revid=0x03
domain=0, bus=0, slot=9, func=1
class=09-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xc800, size 3, enabled
found-> vendor=0x1102, dev=0x4001, revid=0x01
domain=0, bus=0, slot=9, func=2
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=b, irq=12
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xdb005000, size 11, enabled
map[14]: type Memory, range 32, base 0xdb000000, size 14, enabled
pcib0: matched entry for 0.9.INTB (src \\_SB_.PCI0.LNKA:0)
pcib0: slot 9 INTB routed to irq 12 via \\_SB_.PCI0.LNKA
found-> vendor=0x10b7, dev=0x9055, revid=0x30
domain=0, bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=10
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xcc00, size 7, enabled
map[14]: type Memory, range 32, base 0xdb004000, size 7, enabled
pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.LNKD:0)
pcib0: slot 11 INTA routed to irq 10 via \\_SB_.PCI0.LNKD
found-> vendor=0x10b9, dev=0x5237, revid=0x03
domain=0, bus=0, slot=13, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xdb006000, size 12, enabled
pcib0: matched entry for 0.13.INTB (src \\_SB_.PCI0.LNKD:0)
pcib0: slot 13 INTB routed to irq 10 via \\_SB_.PCI0.LNKD
found-> vendor=0x10b9, dev=0x5237, revid=0x03
domain=0, bus=0, slot=13, func=1
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=c, irq=12
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xdb007000, size 12, enabled
pcib0: matched entry for 0.13.INTC (src \\_SB_.PCI0.LNKA:0)
pcib0: slot 13 INTC routed to irq 12 via \\_SB_.PCI0.LNKA
found-> vendor=0x10b9, dev=0x5237, revid=0x03
domain=0, bus=0, slot=13, func=2
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xdb008000, size 12, enabled
pcib0: matched entry for 0.13.INTD (src \\_SB_.PCI0.LNKB:0)
pcib0: slot 13 INTD routed to irq 11 via \\_SB_.PCI0.LNKB
found-> vendor=0x10b9, dev=0x5239, revid=0x01
domain=0, bus=0, slot=13, func=3
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=14
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xdb009000, size 8, enabled
pcib0: matched entry for 0.13.INTA (src \\_SB_.PCI0.LNKC:0)
pcib0: slot 13 INTA routed to irq 14 via \\_SB_.PCI0.LNKC
found-> vendor=0x1095, dev=0x3112, revid=0x01
domain=0, bus=0, slot=15, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xd000, size 3, enabled
map[14]: type I/O Port, range 32, base 0xd400, size 2, enabled
map[18]: type I/O Port, range 32, base 0xd800, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xdc00, size 2, enabled
map[20]: type I/O Port, range 32, base 0xe000, size 4, enabled
map[24]: type Memory, range 32, base 0xdb00a000, size 9, enabled
pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.LNKB:0)
pcib0: slot 15 INTA routed to irq 11 via \\_SB_.PCI0.LNKB
found-> vendor=0x109e, dev=0x036e, revid=0x02
domain=0, bus=0, slot=17, func=0
class=04-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=12
map[10]: type Prefetchable Memory, range 32, base 0xdb00b000, size 12, enabled
pcib0: matched entry for 0.17.INTA (src \\_SB_.PCI0.LNKA:0)
pcib0: slot 17 INTA routed to irq 12 via \\_SB_.PCI0.LNKA
found-> vendor=0x109e, dev=0x0878, revid=0x02
domain=0, bus=0, slot=17, func=1
class=04-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=12
map[10]: type Prefetchable Memory, range 32, base 0xdb00c000, size 12, enabled
pcib0: matched entry for 0.17.INTA (src \\_SB_.PCI0.LNKA:0)
pcib0: slot 17 INTA routed to irq 12 via \\_SB_.PCI0.LNKA
agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0
hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xd8000000-0xd9ffffff
pcib1: prefetched decode 0xd4000000-0xd7ffffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x0181, revid=0xa4
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=12
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd8000000, size 24, enabled
pcib1: requested memory range 0xd8000000-0xd8ffffff: good
map[14]: type Prefetchable Memory, range 32, base 0xd4000000, size 26, enabled
pcib1: requested memory range 0xd4000000-0xd7ffffff: good
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LNKA:0)
pcib0: slot 1 INTA routed to irq 12 via \\_SB_.PCI0.LNKA
pcib1: slot 0 INTA is routed to irq 12
vgapci0: <VGA-compatible display> mem 0xd8000000-0xd8ffffff,0xd4000000-0xd7ffffff irq 12 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
ata1: [ITHREAD]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xc000-0xc01f irq 10 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc000
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.3 (no driver attached)
emu10kx0: <Creative Audigy (Unknown model) [SB????]> port 0xc400-0xc41f irq 11 at device 9.0 on pci0
emu10kx0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xc400
emu10kx0: [MPSAFE]
emu10kx0: [ITHREAD]
emu10kx: setmap (f9a0000, 8000), nseg=1, error=0
emu10kx: setmap (f9b0000, 1000), nseg=1, error=0
emu10kx0: Card Configuration ( 0x00011211 )
emu10kx0: Card Configuration ( & 0xff000000 ) :
emu10kx0: Card Configuration ( & 0x00ff0000 ) : [I2S Codec]
emu10kx0: Card Configuration ( & 0x0000ff00 ) : [GPOUT0] [Joystick]
emu10kx0: Card Configuration ( & 0x000000ff ) : [AUTOMUTE] [AUDIOENABLE]
emu10kx0: Audigy Card Configuration ( 0x0084 )
emu10kx0: Audigy Card Configuration ( & 0xff00 ) :
emu10kx0: Audigy Card Configuration ( & 0x00ff ) : [0x80] [GPOUT0]
pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0
pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 6 bit master volume, SigmaTel 3D Enhancement
pcm0: Primary codec extended features AMAP
pcm0: ac97 codec dac ready count: 0
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Mixer "line1":
pcm0: Mixer "line2":
pcm0: Mixer "line3":
pcm0: Mixer "dig1":
pcm0: Mixer "dig2":
pcm0: Mixer "dig3":
pcm0: Mixer "phin":
pcm0: Mixer "phout":
pcm0: Mixer "video":
pcm0: clone manager: deadline=750ms flags=0x8000001e
emu10kx: setmap (f9c0000, 1000), nseg=1, error=0
emu10kx: setmap (f9d0000, 1000), nseg=1, error=0
emu10kx: setmap (f9e0000, 1000), nseg=1, error=0
emu10kx: setmap (f9f0000, 1000), nseg=1, error=0
pcm0: sndbuf_setmap 1000000, 10000; 0xcc5a8000 -> 1000000
pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0
pcm1: Mixer "vol":
pcm1: Mixer "pcm":
pcm1: clone manager: deadline=750ms flags=0x8000001e
emu10kx: setmap (1060000, 1000), nseg=1, error=0
pcm2: <EMU10Kx DSP center PCM interface> on emu10kx0
pcm2: Mixer "vol":
pcm2: Mixer "pcm":
pcm2: clone manager: deadline=750ms flags=0x8000001e
emu10kx: setmap (1070000, 1000), nseg=1, error=0
pcm3: <EMU10Kx DSP subwoofer PCM interface> on emu10kx0
pcm3: Mixer "vol":
pcm3: Mixer "pcm":
pcm3: clone manager: deadline=750ms flags=0x8000001e
emu10kx: setmap (1090000, 1000), nseg=1, error=0
pci0: <input device> at device 9.1 (no driver attached)
fwohci0: vendor=1102, dev=4001
fwohci0: vendor=1102, dev=4001
fwohci0: <1394 Open Host Controller Interface> mem 0xdb005000-0xdb0057ff,0xdb000000-0xdb003fff irq 12 at device 9.2 on pci0
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xdb005000
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:00:81:00:e7:1f
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3c:00:e7:1f
fwe0: bpf attached
fwe0: Ethernet address: 02:02:3c:00:e7:1f
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:02:3c:00:81:00:e7:1f @ 0xfffe00000000, S400, maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xf8d8000
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem 0xdb004000-0xdb00407f irq 10 at device 11.0 on pci0
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xdb004000
xl0: using memory mapped I/O
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> PHY 24 on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:50:04:34:fd:c1
xl0: [MPSAFE]
xl0: [ITHREAD]
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb006000-0xdb006fff irq 10 at device 13.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb006000
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb1: USB revision 1.0
uhub1: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb007000-0xdb007fff irq 12 at device 13.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb007000
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
usb2: USB revision 1.0
uhub2: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb008000-0xdb008fff irq 11 at device 13.2 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb008000
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci2
usb3: USB revision 1.0
uhub3: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <ALi M5239 USB 2.0 controller> mem 0xdb009000-0xdb0090ff irq 14 at device 13.3 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xdb009000
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb1 usb2 usb3
usb4: <ALi M5239 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <AcerLabs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 6 ports with 6 removable, self powered
atapci1: <SiI SiI 3112 SATA150 controller> port 0xd000-0xd007,0xd400-0xd403,0xd800-0xd807,0xdc00-0xdc03,0xe000-0xe00f mem 0xdb00a000-0xdb00a1ff irq 11 at device 15.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x200 bytes for rid 0x24 type 3 at 0xdb00a000
ata2: <ATA channel 0> on atapci1
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: SATA connect status=00000000
ata3: [MPSAFE]
ata3: [ITHREAD]
bktr0: <BrookTree 878> mem 0xdb00b000-0xdb00bfff irq 12 at device 17.0 on pci0
bktr0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb00b000
bktr0: [GIANT-LOCKED]
bktr0: [ITHREAD]
brooktree0: PCI bus latency is 32.
bktr0: buffer size 3555328, addr 0x6000000
bktr0: GPIO is 0x000477c3
bktr0: subsystem 0x1461 0x0001
bktr0: AVer Media TV/FM, Philips FR1216 PAL FM tuner.
pci0: <multimedia> at device 17.1 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1200-KB 5.25" drive> on fdc0 drive 1
sio0: irq maps: 0x801 0x811 0x801 0x801
sio0: irq maps: 0x801 0x811 0x801 0x801
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [MPSAFE]
ppbus0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x801 0x801 0x801 0x801
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ums0: <Logitech USB-PS/2 Mouse M-BA47, class 0/0, rev 1.00/1.20, addr 2> on uhub0
ums0: 4 buttons and Z dir.
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 400911913 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on PIIX4 chip
acd0: setting UDMA33 on PIIX4 chip
acd0: <HL-DT-ST RW/DVD GCC-4480B/1.02> CDRW drive at ata1 as master
acd0: read 8251KB/s (8251KB/s) write 8251KB/s (8251KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad0: 38146MB <WDC WD400BD-75JMA0 05.01C05> at ata2-master SATA150
ad0: 78125000 sectors [77504C/16H/63S] 16 sectors/interrupt 1 depth queue
ad0: Silicon Image check3 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
GEOM: new disk ad0
GEOM_LABEL: Label for provider ad0s1 is msdosfs/FREEDOS.
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad0s4a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
splash: image decoder found: green_saver
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
acpi: bad write to port 0x070 (8), val 0x4c
acpi: bad read from port 0x071 (8)
----------------- dmesg output with ACPI disabled -------------
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #2: Sat Apr 19 20:53:27 CEST 2008
root at sarge.my.own.domain.no-net:/usr/obj/usr/src/sys/SARGE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0989000.
Preloaded elf module "/boot/kernel/snd_emu10kx.ko" at 0xc0989160.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc0989210.
Preloaded elf module "/boot/kernel/bktr.ko" at 0xc09892bc.
Preloaded elf module "/boot/kernel/bktr_mem.ko" at 0xc0989368.
Calibrating clock(s) ... i8254 clock: 1193347 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 400910629 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
Instruction TLB: 4 KB pages, 4-way set associative, 32 entries
Instruction TLB: 4 MB pages, fully associative, 2 entries
Data TLB: 4 KB pages, 4-way set associative, 64 entries
2nd-level cache: 512 KB, 4-way set associative, 32 byte line size
1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size
Data TLB: 4 MB Pages, 4-way set associative, 8 entries
1st-level data cache: 16 KB, 4-way set associative, 32 byte line size
real memory = 268369920 (255 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000000fb2dfff, 250646528 bytes (61193 pages)
avail memory = 253038592 (241 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fb080
bios32: Entry = 0xfb4f0 (c00fb4f0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb520
pnpbios: Found PnP BIOS data at 0xc00fbed0
pnpbios: Entry = f0000:bf00 Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
bktr_mem: memory holder loaded
random: <entropy source, Software, Yarrow>
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
nfslock: pseudo-device
npx0: INT 16 interface
cpu0 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x62 255 N 9 3 4 5 7 9 10 11 12 14 15
0x63 255 N 9 3 4 5 7 9 10 11 12 14 15
0x60 255 N 9 3 4 5 7 9 10 11 12 14 15
0x61 255 N 9 3 4 5 7 9 10 11 12 14 15
$PIR: Found matching pin for 0.17.INTA at func 0: 12
$PIR: Found matching pin for 0.15.INTA at func 0: 11
$PIR: Found matching pin for 0.13.INTA at func 3: 14
$PIR: Found matching pin for 0.13.INTB at func 0: 10
$PIR: Found matching pin for 0.13.INTC at func 1: 12
$PIR: Found matching pin for 0.13.INTD at func 2: 11
$PIR: Found matching pin for 0.11.INTA at func 0: 10
$PIR: Found matching pin for 0.9.INTA at func 0: 11
$PIR: Found matching pin for 0.9.INTB at func 2: 12
$PIR: Found matching pin for 0.7.INTD at func 2: 10
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x62 14 Y 9 3 4 5 7 9 10 11 12 14 15
0x63 10 Y 9 3 4 5 7 9 10 11 12 14 15
0x60 12 Y 9 3 4 5 7 9 10 11 12 14 15
0x61 11 Y 9 3 4 5 7 9 10 11 12 14 15
$PIR: IRQs used by BIOS: 10 11 12 14
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 0 0 0 0 0 9 9 9 0 9 0 ]
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x7190, revid=0x03
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 26, enabled
found-> vendor=0x8086, dev=0x7191, revid=0x03
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x02
domain=0, bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7111, revid=0x01
domain=0, bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type I/O Port, range 32, base 0xf000, size 4, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
domain=0, bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
map[20]: type I/O Port, range 32, base 0xc000, size 5, enabled
$PIR: 0:7 INTD routed to irq 10
found-> vendor=0x8086, dev=0x7113, revid=0x02
domain=0, bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[90]: type I/O Port, range 32, base 0x5000, size 4, enabled
found-> vendor=0x1102, dev=0x0004, revid=0x03
domain=0, bus=0, slot=9, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xc400, size 5, enabled
$PIR: 0:9 INTA routed to irq 11
found-> vendor=0x1102, dev=0x7003, revid=0x03
domain=0, bus=0, slot=9, func=1
class=09-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xc800, size 3, enabled
found-> vendor=0x1102, dev=0x4001, revid=0x01
domain=0, bus=0, slot=9, func=2
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=b, irq=12
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xdb005000, size 11, enabled
map[14]: type Memory, range 32, base 0xdb000000, size 14, enabled
$PIR: 0:9 INTB routed to irq 12
found-> vendor=0x10b7, dev=0x9055, revid=0x30
domain=0, bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=10
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xcc00, size 7, enabled
map[14]: type Memory, range 32, base 0xdb004000, size 7, enabled
$PIR: 0:11 INTA routed to irq 10
found-> vendor=0x10b9, dev=0x5237, revid=0x03
domain=0, bus=0, slot=13, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xdb006000, size 12, enabled
$PIR: 0:13 INTB routed to irq 10
found-> vendor=0x10b9, dev=0x5237, revid=0x03
domain=0, bus=0, slot=13, func=1
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=c, irq=12
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xdb007000, size 12, enabled
$PIR: 0:13 INTC routed to irq 12
found-> vendor=0x10b9, dev=0x5237, revid=0x03
domain=0, bus=0, slot=13, func=2
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xdb008000, size 12, enabled
$PIR: 0:13 INTD routed to irq 11
found-> vendor=0x10b9, dev=0x5239, revid=0x01
domain=0, bus=0, slot=13, func=3
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=14
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xdb009000, size 8, enabled
$PIR: 0:13 INTA routed to irq 14
found-> vendor=0x1095, dev=0x3112, revid=0x01
domain=0, bus=0, slot=15, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xd000, size 3, enabled
map[14]: type I/O Port, range 32, base 0xd400, size 2, enabled
map[18]: type I/O Port, range 32, base 0xd800, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xdc00, size 2, enabled
map[20]: type I/O Port, range 32, base 0xe000, size 4, enabled
map[24]: type Memory, range 32, base 0xdb00a000, size 9, enabled
$PIR: 0:15 INTA routed to irq 11
found-> vendor=0x109e, dev=0x036e, revid=0x02
domain=0, bus=0, slot=17, func=0
class=04-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=12
map[10]: type Prefetchable Memory, range 32, base 0xdb00b000, size 12, enabled
$PIR: 0:17 INTA routed to irq 12
found-> vendor=0x109e, dev=0x0878, revid=0x02
domain=0, bus=0, slot=17, func=1
class=04-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=12
map[10]: type Prefetchable Memory, range 32, base 0xdb00c000, size 12, enabled
$PIR: 0:17 INTA routed to irq 12
agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0
hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xd8000000-0xd9ffffff
pcib1: prefetched decode 0xd4000000-0xd7ffffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x0181, revid=0xa4
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=12
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd8000000, size 24, enabled
pcib1: requested memory range 0xd8000000-0xd8ffffff: good
map[14]: type Prefetchable Memory, range 32, base 0xd4000000, size 26, enabled
pcib1: requested memory range 0xd4000000-0xd7ffffff: good
$PIR: 0:1 INTA routed to irq 12
pcib1: slot 0 INTA is routed to irq 12
vgapci0: <VGA-compatible display> mem 0xd8000000-0xd8ffffff,0xd4000000-0xd7ffffff irq 12 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
ata1: [ITHREAD]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xc000-0xc01f irq 10 at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc000
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.3 (no driver attached)
emu10kx0: <Creative Audigy (Unknown model) [SB????]> port 0xc400-0xc41f irq 11 at device 9.0 on pci0
emu10kx0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xc400
emu10kx0: [MPSAFE]
emu10kx0: [ITHREAD]
emu10kx: setmap (f970000, 8000), nseg=1, error=0
emu10kx: setmap (f980000, 1000), nseg=1, error=0
emu10kx0: Card Configuration ( 0x00011211 )
emu10kx0: Card Configuration ( & 0xff000000 ) :
emu10kx0: Card Configuration ( & 0x00ff0000 ) : [I2S Codec]
emu10kx0: Card Configuration ( & 0x0000ff00 ) : [GPOUT0] [Joystick]
emu10kx0: Card Configuration ( & 0x000000ff ) : [AUTOMUTE] [AUDIOENABLE]
emu10kx0: Audigy Card Configuration ( 0x0084 )
emu10kx0: Audigy Card Configuration ( & 0xff00 ) :
emu10kx0: Audigy Card Configuration ( & 0x00ff ) : [0x80] [GPOUT0]
pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0
pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 6 bit master volume, SigmaTel 3D Enhancement
pcm0: Primary codec extended features AMAP
pcm0: ac97 codec dac ready count: 0
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Mixer "line1":
pcm0: Mixer "line2":
pcm0: Mixer "line3":
pcm0: Mixer "dig1":
pcm0: Mixer "dig2":
pcm0: Mixer "dig3":
pcm0: Mixer "phin":
pcm0: Mixer "phout":
pcm0: Mixer "video":
pcm0: clone manager: deadline=750ms flags=0x8000001e
emu10kx: setmap (f990000, 1000), nseg=1, error=0
emu10kx: setmap (f9a0000, 1000), nseg=1, error=0
emu10kx: setmap (f9b0000, 1000), nseg=1, error=0
emu10kx: setmap (f9c0000, 1000), nseg=1, error=0
pcm0: sndbuf_setmap f9e0000, 10000; 0xcc597000 -> f9e0000
pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0
pcm1: Mixer "vol":
pcm1: Mixer "pcm":
pcm1: clone manager: deadline=750ms flags=0x8000001e
emu10kx: setmap (1030000, 1000), nseg=1, error=0
pcm2: <EMU10Kx DSP center PCM interface> on emu10kx0
pcm2: Mixer "vol":
pcm2: Mixer "pcm":
pcm2: clone manager: deadline=750ms flags=0x8000001e
emu10kx: setmap (1050000, 1000), nseg=1, error=0
pcm3: <EMU10Kx DSP subwoofer PCM interface> on emu10kx0
pcm3: Mixer "vol":
pcm3: Mixer "pcm":
pcm3: clone manager: deadline=750ms flags=0x8000001e
emu10kx: setmap (1060000, 1000), nseg=1, error=0
pci0: <input device> at device 9.1 (no driver attached)
fwohci0: vendor=1102, dev=4001
fwohci0: vendor=1102, dev=4001
fwohci0: <1394 Open Host Controller Interface> mem 0xdb005000-0xdb0057ff,0xdb000000-0xdb003fff irq 12 at device 9.2 on pci0
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xdb005000
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:00:81:00:e7:1f
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xf894000
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3c:00:e7:1f
fwe0: bpf attached
fwe0: Ethernet address: 02:02:3c:00:e7:1f
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:02:3c:00:81:00:e7:1f @ 0xfffe00000000, S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem 0xdb004000-0xdb00407f irq 10 at device 11.0 on pci0
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xdb004000
xl0: using memory mapped I/O
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> PHY 24 on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:50:04:34:fd:c1
xl0: [MPSAFE]
xl0: [ITHREAD]
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb006000-0xdb006fff irq 10 at device 13.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb006000
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb1: USB revision 1.0
uhub1: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb007000-0xdb007fff irq 12 at device 13.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb007000
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
usb2: USB revision 1.0
uhub2: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb008000-0xdb008fff irq 11 at device 13.2 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb008000
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci2
usb3: USB revision 1.0
uhub3: <AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <ALi M5239 USB 2.0 controller> mem 0xdb009000-0xdb0090ff irq 14 at device 13.3 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xdb009000
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb1 usb2 usb3
usb4: <ALi M5239 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <AcerLabs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 6 ports with 6 removable, self powered
atapci1: <SiI SiI 3112 SATA150 controller> port 0xd000-0xd007,0xd400-0xd403,0xd800-0xd807,0xdc00-0xdc03,0xe000-0xe00f mem 0xdb00a000-0xdb00a1ff irq 11 at device 15.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x200 bytes for rid 0x24 type 3 at 0xdb00a000
ata2: <ATA channel 0> on atapci1
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: SATA connect status=00000000
ata3: [MPSAFE]
ata3: [ITHREAD]
bktr0: <BrookTree 878> mem 0xdb00b000-0xdb00bfff irq 12 at device 17.0 on pci0
bktr0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdb00b000
bktr0: [GIANT-LOCKED]
bktr0: [ITHREAD]
brooktree0: PCI bus latency is 32.
bktr0: buffer size 3555328, addr 0x6000000
bktr0: GPIO is 0x000477c3
bktr0: subsystem 0x1461 0x0001
bktr0: AVer Media TV/FM, Philips FR1216 PAL FM tuner.
pci0: <multimedia> at device 17.1 (no driver attached)
pnpbios: 13 devices, largest 69 bytes
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0xfffffff, size=0xff00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000
PNP0c02: adding fixed memory32 range 0xcf400-0xcffff, size=0xc00
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x294-0x297, size=0x4, align=0
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x480-0x48f, size=0x10, align=0
PNP0a03: adding io range 0x4000-0x403f, size=0x40, align=0
PNP0a03: adding io range 0x5000-0x501f, size=0x20, align=0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0
PNP0700: adding irq mask 0x40
pnpbios: handle 13 device ID PNP0700 (0007d041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0
pnpbios: handle 14 device ID PNP0400 (0004d041)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0067
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 80
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1200-KB 5.25" drive> on fdc0 drive 1
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [MPSAFE]
ppbus0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sio0: irq maps: 0x801 0x811 0x801 0x801
sio0: irq maps: 0x801 0x811 0x801 0x801
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x801 0x801 0x801 0x801
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 pnpid PNP0303 on isa0
unknown: <PNP0800> failed to probe at port 0x61 pnpid PNP0800 on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9ffff pnpid PNP0c01 on isa0
unknown: <PNP0a03> can't assign resources (port)
unknown: <PNP0a03> at port 0x294-0x297,0x4d0-0x4d1,0xcf8-0xcff,0x480-0x48f,0x4000-0x403f,0x5000-0x501f pnpid PNP0a03 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff pnpid PNP0501 on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f2-0x3f5 pnpid PNP0700 on isa0
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0400> at port 0x378-0x37f pnpid PNP0400 on isa0
ums0: <Logitech USB-PS/2 Mouse M-BA47, class 0/0, rev 1.00/1.20, addr 2> on uhub0
ums0: 4 buttons and Z dir.
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 400910629 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on PIIX4 chip
acd0: setting UDMA33 on PIIX4 chip
acd0: <HL-DT-ST RW/DVD GCC-4480B/1.02> CDRW drive at ata1 as master
acd0: read 8251KB/s (8251KB/s) write 8251KB/s (8251KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad0: 38146MB <WDC WD400BD-75JMA0 05.01C05> at ata2-master SATA150
ad0: 78125000 sectors [77504C/16H/63S] 16 sectors/interrupt 1 depth queue
ad0: Silicon Image check3 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
GEOM: new disk ad0
GEOM_LABEL: Label for provider ad0s1 is msdosfs/FREEDOS.
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad0s4a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
splash: image decoder found: green_saver
---------------- Output from sysctl hw.acpi -----------------------
hw.acpi.supported_sleep_state: S1 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 1
hw.acpi.verbose: 1
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 0
hw.acpi.reset_video: 0
hw.acpi.cpu.cx_lowest: C1
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.user_override: 0
hw.acpi.thermal.tz0.temperature: 0.0C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 70.0C
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 200.0C
hw.acpi.thermal.tz0._ACx: 70.0C -1 -1 -1 -1 -1 -1 -1 -1 -1
--
pozdrawiam / regards
Zbigniew Baniewski
More information about the freebsd-acpi
mailing list