ACPI error on Compaq nc6220, FreeBSD 7.0

Denis piloyder at gmail.com
Sat Sep 1 07:39:47 PDT 2007


I use FreeBSD 7.0 (FreeBSD MY.LAPTOP 7.0-CURRENT FreeBSD 7.0-CURRENT
#0: Sat Sep  1 18:26:32 MSD 2007
root at MY.LAPTOP:/usr/obj/usr/src/sys/GENERIC  i386) on my laptop -
Compaq nc6220.
And when I boot with ACPI enable after short period of time (about 0-3
minutes) I get next error on the console 0 (this message doesn't save
in the log, I made photo and type from it):
---
ACPI Exception (utmutex-0376): AE_TIME, Thread 27 could not acquire
Mutex [0] [20070320]
ACPI Error (exutils-0180): Could not acquire AML Interpreter mutex [20070320]
ACPI Error (utmutex-0421): Mutex[0] is not acquired, cannot release [20070320]
ACPI Error (exutils-0250): Could not acquire AML Interpreter mutex [20070320]
ACPI Exception (utmutex-0376): AE_TIME, Thread 27 could not acquire
Mutex [0] [20070320]
ACPI Error (exutils-0180): Could not acquire AML Interpreter mutex [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\_TZ_.C265]
(Node 0xc2e3fbe0), AE_TIME
ACPI Error (psparse-0626): Method parse/execution failed
[\_TZ_.TZ1_._TMP] (Node 0xc2e43920), AE_TIME
acpi_tz0: error fetching current temperature -- AE_TIME
ACPI Error (utmutex-0421): Mutex[0] is not acquired, cannot release [20070320]
ACPI Error (exutils-0250): Could not acquire AML Interpreter mutex [20070320]
---

After this error I cannot continue to work, the only way to reboot -
to switch power off.
Without  ACPI it works fine.

FreeBSD 6.2 on this laptop with ACPI enabled works almost fine - I do
not have such error (almost means that  sometimes computer gets
overheated - cpu fun doesn't start.
http://lists.freebsd.org/pipermail/freebsd-acpi/2007-June/003818.html)

dmesg(8) with verbose booting with and without ACPI is in attach.
ASL is here http://piloyder.googlepages.com/compaq_nc6220_freebsd_7.0.asl
sysctl hw.acpi:
---
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 1
hw.acpi.verbose: 1
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 0
hw.acpi.reset_video: 0
hw.acpi.cpu.cx_lowest: C1
hw.acpi.battery.life: 100
hw.acpi.battery.time: -1
hw.acpi.battery.state: 0
hw.acpi.battery.units: 2
hw.acpi.battery.info_expire: 5
hw.acpi.acline: 1
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.user_override: 0
hw.acpi.thermal.tz0.temperature: 52.0C
hw.acpi.thermal.tz0.active: 3
hw.acpi.thermal.tz0.passive_cooling: 1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 100.0C
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 105.0C
hw.acpi.thermal.tz0._ACx: 80.0C 70.0C 58.0C 35.0C -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz1.temperature: 37.0C
hw.acpi.thermal.tz1.active: -1
hw.acpi.thermal.tz1.passive_cooling: 0
hw.acpi.thermal.tz1.thermal_flags: 0
hw.acpi.thermal.tz1._PSV: -1
hw.acpi.thermal.tz1._HOT: -1
hw.acpi.thermal.tz1._CRT: 103.0C
hw.acpi.thermal.tz1._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz2.temperature: 28.8C
hw.acpi.thermal.tz2.active: -1
hw.acpi.thermal.tz2.passive_cooling: 0
hw.acpi.thermal.tz2.thermal_flags: 0
hw.acpi.thermal.tz2._PSV: 60.0C
hw.acpi.thermal.tz2._HOT: -1
hw.acpi.thermal.tz2._CRT: 105.0C
hw.acpi.thermal.tz2._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
---

Is it possible to fix this error?
Many-many thanks in advance!

Best regards, Denis
-------------- next part --------------
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #0: Sat Sep  1 18:26:32 MSD 2007
    root at EERUL8728008.EE.INTERBREW.NET:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0df5000.
Preloaded elf module "/boot/kernel/if_iwi.ko" at 0xc0df51f8.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0df52a4.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc0df5350.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0df53fc.
Calibrating clock(s) ... i8254 clock: 1193222 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1729181538 Hz
CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.18-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
  AMD Features=0x100000<NX>

Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
Data TLB: 4 KB Pages, 4-way set associative, 128 entries
Instruction TLB: 4 MB pages, fully associative, 2 entries
2nd-level cache: 2-MB, 8-way set associative, 64-byte line size
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
Data TLB: 4 MB Pages, 4-way set associative, 8 entries
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line
real memory  = 528285696 (503 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001028000 - 0x000000001eeb0fff, 501780480 bytes (122505 pages)
avail memory = 503017472 (479 MB)
Table 'FACP' at 0x1f7efc00
Table 'APIC' at 0x1f7efcb8
MADT: Found table at 0x1f7efcb8
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
ACPI APIC Table: <HP     0944    >
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf0000 (c00f0000)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x322
pnpbios: Found PnP BIOS data at 0xc00f4a70
pnpbios: Entry = f0000:4a9e  Rev = 1.0
pnpbios: Event flag at f4a96
pnpbios: OEM ID 8a303c10
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
ACPI: RSDP @ 0x0xfe270/0x0014 (v  0 HP    )
ACPI: RSDT @ 0x0x1f7efc84/0x0034 (v  1 HP     0944     0x24100520 HP   0x00000001)
ACPI: FACP @ 0x0x1f7efc00/0x0084 (v  2 HP     0944     0x00000002 HP   0x00000001)
ACPI: DSDT @ 0x0x1f7efd50/0x827A (v  1 HP       nc6200 0x00010000 MSFT 0x0100000E)
ACPI: FACS @ 0x0x1f7fae80/0x0040
ACPI: APIC @ 0x0x1f7efcb8/0x005A (v  1 HP     0944     0x00000001 HP   0x00000001)
ACPI: MCFG @ 0x0x1f7efd14/0x003C (v  1 HP     0944     0x00000001 HP   0x00000001)
ACPI: SSDT @ 0x0x1f7f7fca/0x0371 (v  1 HP       HPQPpc 0x00001001 MSFT 0x0100000E)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Sep  1 2007 18:26:02)
npx0: INT 16 interface
acpi0: <HP 0944> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000f920
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=25908086)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.C002.C05C -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.C002.C06D.C1C6.C1C7 -> bus 2 dev 6 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xccd70000 pa 0x1000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.C002.C003.C074 -> bus 0 dev 31 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1f700000 (3) failed
ACPI timer: 1/1 1/1 1/2 1/2 1/1 1/1 1/1 1/1 1/2 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  10 11
  Validation          0   10   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  10 11
  Validation          0   11   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  10 11
  Validation          0   11   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  10 11
  Validation          0   10   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  10 11
  Validation          0   10   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  10 11
  Validation          0   11   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  10 11
  Validation          0   10   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  none
  Validation          0  255   N     0  none
  After Disable       0  255   N     0  none
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x8086, dev=0x2590, revid=0x03
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2592, revid=0x03
	bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xd0800000, size 19, enabled
	map[14]: type I/O Port, range 32, base 0x5000, size  3, enabled
	map[18]: type Prefetchable Memory, range 32, base 0xc0000000, size 28, enabled
	map[1c]: type Memory, range 32, base 0xd0880000, size 18, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2792, revid=0x03
	bus=0, slot=2, func=1
	class=03-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xd0900000, size 19, enabled
found->	vendor=0x8086, dev=0x2660, revid=0x03
	bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2662, revid=0x03
	bus=0, slot=28, func=1
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x8086, dev=0x2658, revid=0x03
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0x2000, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 20
found->	vendor=0x8086, dev=0x2659, revid=0x03
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0x2020, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x265a, revid=0x03
	bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	map[20]: type I/O Port, range 32, base 0x2040, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x265c, revid=0x03
	bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xd0980000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 20
found->	vendor=0x8086, dev=0x2448, revid=0xd3
	bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x266e, revid=0x03
	bus=0, slot=30, func=2
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0x2100, size  8, enabled
	map[14]: type I/O Port, range 32, base 0x2200, size  6, enabled
	map[18]: type Memory, range 32, base 0xd0981000, size  9, enabled
	map[1c]: type Memory, range 32, base 0xd0982000, size  8, enabled
pcib0: matched entry for 0.30.INTA
pcib0: slot 30 INTA hardwired to IRQ 21
found->	vendor=0x8086, dev=0x266d, revid=0x03
	bus=0, slot=30, func=3
	class=07-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0x2400, size  8, enabled
	map[14]: type I/O Port, range 32, base 0x2500, size  7, enabled
pcib0: matched entry for 0.30.INTB
pcib0: slot 30 INTB hardwired to IRQ 22
found->	vendor=0x8086, dev=0x2641, revid=0x03
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x266f, revid=0x03
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0x2580, size  4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 16
vgapci0: <VGA-compatible display> port 0x5000-0x5007 mem 0xd0800000-0xd087ffff,0xc0000000-0xcfffffff,0xd0880000-0xd08bffff irq 16 at device 2.0 on pci0
agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xc0000000
vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xd0800000
vgapci0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xd0880000
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xd0900000-0xd097ffff at device 2.1 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1:   secondary bus     16
pcib1:   subordinate bus   16
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xd0000000-0xd03fffff
pcib1:   no prefetched decode
pci16: <ACPI PCI bus> on pcib1
pci16: physical bus=16
found->	vendor=0x14e4, dev=0x167d, revid=0x11
	bus=16, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type Memory, range 64, base 0xd0000000, size 16, enabled
pcib1: requested memory range 0xd0000000-0xd000ffff: good
pcib1: matched entry for 16.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
pci16:0:0: bad VPD cksum, remain 14
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4101> mem 0xd0000000-0xd000ffff irq 16 at device 0.0 on pci16
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd0000000
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x0018, rev. 0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:14:c2:df:4b:3e
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
bge0: [MPSAFE]
bge0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pcib2:   secondary bus     32
pcib2:   subordinate bus   32
pcib2:   I/O decode        0x0-0x0
pcib2:   no prefetched decode
pci32: <ACPI PCI bus> on pcib2
pci32: physical bus=32
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x2000-0x201f irq 20 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2000
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 50
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x2020-0x203f irq 17 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2020
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 51
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x2040-0x205f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2040
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xd0980000-0xd09803ff irq 20 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd0980000
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: wrong number of companions (4 != 3)
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib3:   secondary bus     2
pcib3:   subordinate bus   3
pcib3:   I/O decode        0xf000-0xfff
pcib3:   memory decode     0xd0400000-0xd07fffff
pcib3:   no prefetched decode
pcib3:   Subtractively decoded bridge.
pci2: <ACPI PCI bus> on pcib3
pci2: physical bus=2
found->	vendor=0x8086, dev=0x4220, revid=0x05
	bus=2, slot=4, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xd0400000, size 12, enabled
pcib3: requested memory range 0xd0400000-0xd0400fff: good
pcib3: matched entry for 2.4.INTA
pcib3: slot 4 INTA hardwired to IRQ 21
found->	vendor=0x104c, dev=0x8031, revid=0x00
	bus=2, slot=6, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xd0401000, size 12, enabled
pcib3: requested memory range 0xd0401000-0xd0401fff: good
pcib3: matched entry for 2.6.INTA
pcib3: slot 6 INTA hardwired to IRQ 18
found->	vendor=0x104c, dev=0x8033, revid=0x00
	bus=2, slot=6, func=3
	class=01-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xd0402000, size 13, enabled
pcib3: requested memory range 0xd0402000-0xd0403fff: good
pcib3: matched entry for 2.6.INTB
pcib3: slot 6 INTB hardwired to IRQ 19
found->	vendor=0x104c, dev=0x8034, revid=0x00
	bus=2, slot=6, func=4
	class=08-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xd0404000, size  8, enabled
pcib3: requested memory range 0xd0404000-0xd04040ff: good
	map[14]: type Memory, range 32, base 0xd0405000, size  8, enabled
pcib3: requested memory range 0xd0405000-0xd04050ff: good
	map[18]: type Memory, range 32, base 0xd0406000, size  8, enabled
pcib3: requested memory range 0xd0406000-0xd04060ff: good
pcib3: matched entry for 2.6.INTC
pcib3: slot 6 INTC hardwired to IRQ 22
found->	vendor=0x104c, dev=0x8035, revid=0x00
	bus=2, slot=6, func=5
	class=07-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xd0407000, size 12, enabled
pcib3: requested memory range 0xd0407000-0xd0407fff: good
	map[14]: type Memory, range 32, base 0xd0408000, size 12, enabled
pcib3: requested memory range 0xd0408000-0xd0408fff: good
	map[18]: type Memory, range 32, base 0xd0409000, size 12, enabled
pcib3: requested memory range 0xd0409000-0xd0409fff: good
	map[1c]: type Memory, range 32, base 0xd040a000, size 12, enabled
pcib3: requested memory range 0xd040a000-0xd040afff: good
pcib3: matched entry for 2.6.INTA
pcib3: slot 6 INTA hardwired to IRQ 18
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xd0400000-0xd0400fff irq 21 at device 4.0 on pci2
iwi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0400000
iwi0: bpf attached
iwi0: Ethernet address: 00:15:00:3a:f8:2a
iwi0: bpf attached
iwi0: bpf attached
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 53
iwi0: [MPSAFE]
iwi0: [ITHREAD]
iwi0: auto rates: 
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0: <TI6411 PCI-CardBus Bridge> mem 0xd0401000-0xd0401fff irq 18 at device 6.0 on pci2
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0401000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: [ITHREAD]
cbb0: PCI Configuration space:
  0x00: 0x8031104c 0x02100007 0x06070000 0x00824010 
  0x10: 0xd0401000 0x020000a0 0x20030302 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x07440112 
  0x40: 0x0944103c 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x08441060 0x00000000 0x00070000 0x01111b22 
  0x90: 0x406402c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pci2: <mass storage> at device 6.3 (no driver attached)
pci2: <base peripheral> at device 6.4 (no driver attached)
pci2: <simple comms> at device 6.5 (no driver attached)
pcm0: <Intel ICH6 (82801FB)> port 0x2100-0x21ff,0x2200-0x223f mem 0xd0981000-0xd09811ff,0xd0982000-0xd09820ff irq 21 at device 30.2 on pci0
pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xd0981000
pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xd0982000
pcm0: [MPSAFE]
pcm0: [ITHREAD]
pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4
pcm0: ac97 codec dac ready count: 0
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Mixer "line1":
pcm0: Mixer "phin":
pcm0: Mixer "phout":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 1ec94000, 4000; 0xd4c3d000 -> 1ec94000
pcm0: sndbuf_setmap 1ec9c000, 4000; 0xd4c41000 -> 1ec9c000
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2580-0x258f irq 16 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2580
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55
ata1: [MPSAFE]
ata1: [ITHREAD]
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
sio0: irq maps: 0x4e01 0x4e11 0x4e01 0x4e01
sio0: irq maps: 0x4e01 0x4e11 0x4e01 0x4e01
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
sio0: [FILTER]
sio1: irq maps: 0x4e01 0x4e09 0x4e01 0x4e01
sio1: irq maps: 0x4e01 0x4e09 0x4e01 0x4e01
sio1: <Generic IRDA-compatible device> port 0x3e8-0x3ef,0x100-0x10f irq 3 drq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 59
sio1: [FILTER]
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd2fff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 60
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/20.00, addr 2> on uhub1
ums0: 3 buttons and Z dir.
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 66506984 hz
Timecounter "TSC" frequency 1729181538 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
acpi_tz0: _AC3: temperature 78.0 >= setpoint 35.0
acpi_tz0: _AC2: temperature 78.0 >= setpoint 55.0
acpi_tz0: _AC1: temperature 78.0 >= setpoint 65.0
acpi_tz0: _AC0: temperature 78.0 >= setpoint 75.0
acpi_tz0: switched from NONE to _AC0: 78.0C
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.C002.C006.C0CF -> bus 0 dev 28 func 0
battery0: battery initialization start
battery1: battery initialization start
ad0: setting PIO4 on ICH6 chip
ad0: setting UDMA100 on ICH6 chip
ad0: 57231MB <WDC WD600VE-00HDT0 09.07D09> at ata0-master UDMA100
ad0: 117210240 sectors [124032C/15H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
battery0: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_tz0: _AC3: temperature 78.0 >= setpoint 35.0
acpi_tz0: _AC2: temperature 78.0 >= setpoint 55.0
acpi_tz0: _AC1: temperature 78.0 >= setpoint 65.0
acpi_tz0: _AC3: temperature 78.0 >= setpoint 35.0
acpi_tz0: _AC2: temperature 78.0 >= setpoint 55.0
acpi_tz0: _AC1: temperature 78.0 >= setpoint 65.0
acpi_tz0: switched from _AC0 to _AC1: 78.0C
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.C002.C0DE.C0DF -> bus 0 dev 28 func 1
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
acd0: setting PIO4 on ICH6 chip
acd0: <UJDA765aDVD/CDRW/1.02> CDRW drive at ata0 as slave
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-R 120mm data disc
pcm0: measured ac97 link rate at 48005 Hz, will use 48000 Hz
ATA PseudoRAID loaded
WARNING: WITNESS option enabled, expect reduced performance.
GEOM_LABEL: Label for provider acd0 is iso9660/styabap.
Trying to mount root from ufs:/dev/ad0s3a
start_init: trying /sbin/init
acpi_tz0: _AC3: temperature 75.0 >= setpoint 35.0
acpi_tz0: _AC2: temperature 75.0 >= setpoint 55.0
acpi_tz0: _AC3: temperature 70.0 >= setpoint 35.0
acpi_tz0: _AC2: temperature 70.0 >= setpoint 55.0
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled
Linux ELF exec handler installed
acpi_tz0: _AC3: temperature 69.0 >= setpoint 35.0
acpi_tz0: _AC2: temperature 69.0 >= setpoint 55.0
acpi_tz0: _AC3: temperature 72.0 >= setpoint 35.0
acpi_tz0: _AC2: temperature 72.0 >= setpoint 55.0
acpi_tz0: _AC3: temperature 68.0 >= setpoint 35.0
acpi_tz0: _AC2: temperature 68.0 >= setpoint 55.0
battery1: battery initialization failed, giving up
acpi_tz0: _AC3: temperature 67.0 >= setpoint 35.0
acpi_tz0: _AC2: temperature 67.0 >= setpoint 55.0
-------------- next part --------------
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #0: Sat Sep  1 18:26:32 MSD 2007
    root at EERUL8728008.EE.INTERBREW.NET:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.18-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
  AMD Features=0x100000<NX>
real memory  = 528285696 (503 MB)
avail memory = 503037952 (479 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
cpu0 on motherboard
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6120d2606000d26
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x5007 mem 0xd0800000-0xd087ffff,0xc0000000-0xcfffffff,0xd0880000-0xd08bffff irq 10 at device 2.0 on pci0
agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xd0900000-0xd097ffff at device 2.1 on pci0
pcib1: <PCI-PCI bridge> irq 10 at device 28.0 on pci0
pci16: <PCI bus> on pcib1
pci16:0:0: bad VPD cksum, remain 14
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4101> mem 0xd0000000-0xd000ffff irq 10 at device 0.0 on pci16
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:14:c2:df:4b:3e
bge0: [ITHREAD]
pcib2: <PCI-PCI bridge> at device 28.1 on pci0
pci32: <PCI bus> on pcib2
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x2000-0x201f irq 10 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x2020-0x203f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x2040-0x205f irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xd0980000-0xd09803ff irq 10 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: wrong number of companions (4 != 3)
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 8 ports with 8 removable, self powered
pcib3: <PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib3
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xd0400000-0xd0400fff irq 11 at device 4.0 on pci2
iwi0: Ethernet address: 00:15:00:3a:f8:2a
iwi0: [ITHREAD]
cbb0: <TI6411 PCI-CardBus Bridge> mem 0xd0401000-0xd0401fff irq 11 at device 6.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
pci2: <mass storage> at device 6.3 (no driver attached)
pci2: <base peripheral> at device 6.4 (no driver attached)
pci2: <simple comms> at device 6.5 (no driver attached)
pcm0: <Intel ICH6 (82801FB)> port 0x2100-0x21ff,0x2200-0x223f mem 0xd0981000-0xd09811ff,0xd0982000-0xd09820ff irq 11 at device 30.2 on pci0
pcm0: [ITHREAD]
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2580-0x258f irq 10 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd2fff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
sio4: <16550 or compatible> at port 0x3e8-0x3ef,0x300-0x30f irq 3 drq 3 pnpid SMCf010 on isa0
sio4: type 16550A
sio4: [FILTER]
unknown: <PNP0c02> can't assign resources (memory)
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/20.00, addr 2> on uhub1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1729181898 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 57231MB <WDC WD600VE-00HDT0 09.07D09> at ata0-master UDMA100
acd0: CDRW <UJDA765aDVD/CDRW/1.02> at ata0-slave PIO4
WARNING: WITNESS option enabled, expect reduced performance.
GEOM_LABEL: Label for provider acd0 is iso9660/styabap.
Trying to mount root from ufs:/dev/ad0s3a
WARNING: / was not properly dismounted
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled
drm0: <Intel i915GM> on vgapci0
info: [drm] AGP at 0xc0000000 256MB
info: [drm] Initialized i915 1.5.0 20060119
drm0: [ITHREAD]
bge0: link state changed to UP
calcru: runtime went backwards from 1081 usec to 1066 usec for pid 0 (swapper)
TCP: [69.64.6.22]:80 to [192.168.1.2]:49366 tcpflags 0x18<PUSH,ACK>; tcp_do_segment: FIN_WAIT_1: Received data after socket was closed, sending RST and removing tcpcb
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...6 4 3 0 0 done
All buffers synced.
Uptime: 9m21s
Rebooting...
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #0: Sat Sep  1 18:26:32 MSD 2007
    root at EERUL8728008.EE.INTERBREW.NET:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0d89000.
Preloaded elf module "/boot/kernel/if_iwi.ko" at 0xc0d891f8.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0d892a4.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc0d89350.
APIC: Could not find any APICs.
Calibrating clock(s) ... i8254 clock: 1193222 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1729179705 Hz
CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.18-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
  AMD Features=0x100000<NX>

Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
Data TLB: 4 KB Pages, 4-way set associative, 128 entries
Instruction TLB: 4 MB pages, fully associative, 2 entries
2nd-level cache: 2-MB, 8-way set associative, 64-byte line size
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
Data TLB: 4 MB Pages, 4-way set associative, 8 entries
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line
real memory  = 528285696 (503 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001028000 - 0x000000001eeb0fff, 501780480 bytes (122505 pages)
avail memory = 503037952 (479 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf0000 (c00f0000)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x322
pnpbios: Found PnP BIOS data at 0xc00f4a70
pnpbios: Entry = f0000:4a9e  Rev = 1.0
pnpbios: Event flag at f4a96
pnpbios: OEM ID 8a303c10
Other BIOS signatures found:
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Sep  1 2007 18:26:02)
npx0: INT 16 interface
cpu0 on motherboard
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6120d2606000d26
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000f920
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=25908086)
pcibios: BIOS version 2.10
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x8086, dev=0x2590, revid=0x03
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2592, revid=0x03
	bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xd0800000, size 19, enabled
	map[14]: type I/O Port, range 32, base 0x5000, size  3, enabled
	map[18]: type Prefetchable Memory, range 32, base 0xc0000000, size 28, enabled
	map[1c]: type Memory, range 32, base 0xd0880000, size 18, enabled
found->	vendor=0x8086, dev=0x2792, revid=0x03
	bus=0, slot=2, func=1
	class=03-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xd0900000, size 19, enabled
found->	vendor=0x8086, dev=0x2660, revid=0x03
	bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x8086, dev=0x2662, revid=0x03
	bus=0, slot=28, func=1
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x8086, dev=0x2658, revid=0x03
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0x2000, size  5, enabled
found->	vendor=0x8086, dev=0x2659, revid=0x03
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0x2020, size  5, enabled
found->	vendor=0x8086, dev=0x265a, revid=0x03
	bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	map[20]: type I/O Port, range 32, base 0x2040, size  5, enabled
found->	vendor=0x8086, dev=0x265c, revid=0x03
	bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xd0980000, size 10, enabled
found->	vendor=0x8086, dev=0x2448, revid=0xd3
	bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x266e, revid=0x03
	bus=0, slot=30, func=2
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0x2100, size  8, enabled
	map[14]: type I/O Port, range 32, base 0x2200, size  6, enabled
	map[18]: type Memory, range 32, base 0xd0981000, size  9, enabled
	map[1c]: type Memory, range 32, base 0xd0982000, size  8, enabled
found->	vendor=0x8086, dev=0x266d, revid=0x03
	bus=0, slot=30, func=3
	class=07-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0x2400, size  8, enabled
	map[14]: type I/O Port, range 32, base 0x2500, size  7, enabled
found->	vendor=0x8086, dev=0x2641, revid=0x03
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x266f, revid=0x03
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0x2580, size  4, enabled
vgapci0: <VGA-compatible display> port 0x5000-0x5007 mem 0xd0800000-0xd087ffff,0xc0000000-0xcfffffff,0xd0880000-0xd08bffff irq 10 at device 2.0 on pci0
agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xc0000000
vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xd0800000
vgapci0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xd0880000
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xd0900000-0xd097ffff at device 2.1 on pci0
pcib1: <PCI-PCI bridge> irq 10 at device 28.0 on pci0
pcib1:   secondary bus     16
pcib1:   subordinate bus   16
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xd0000000-0xd03fffff
pcib1:   no prefetched decode
pci16: <PCI bus> on pcib1
pci16: physical bus=16
found->	vendor=0x14e4, dev=0x167d, revid=0x11
	bus=16, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type Memory, range 64, base 0xd0000000, size 16, enabled
pcib1: requested memory range 0xd0000000-0xd000ffff: good
pci16:0:0: bad VPD cksum, remain 14
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4101> mem 0xd0000000-0xd000ffff irq 10 at device 0.0 on pci16
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd0000000
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x0018, rev. 0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:14:c2:df:4b:3e
bge0: [MPSAFE]
bge0: [ITHREAD]
pcib2: <PCI-PCI bridge> at device 28.1 on pci0
pcib2:   secondary bus     32
pcib2:   subordinate bus   32
pcib2:   I/O decode        0x0-0x0
pcib2:   no prefetched decode
pci32: <PCI bus> on pcib2
pci32: physical bus=32
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x2000-0x201f irq 10 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2000
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x2020-0x203f irq 11 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2020
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x2040-0x205f irq 11 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2040
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xd0980000-0xd09803ff irq 10 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd0980000
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: wrong number of companions (4 != 3)
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 8 ports with 8 removable, self powered
pcib3: <PCI-PCI bridge> at device 30.0 on pci0
pcib3:   secondary bus     2
pcib3:   subordinate bus   3
pcib3:   I/O decode        0xf000-0xfff
pcib3:   memory decode     0xd0400000-0xd07fffff
pcib3:   no prefetched decode
pcib3:   Subtractively decoded bridge.
pci2: <PCI bus> on pcib3
pci2: physical bus=2
found->	vendor=0x8086, dev=0x4220, revid=0x05
	bus=2, slot=4, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xd0400000, size 12, enabled
pcib3: requested memory range 0xd0400000-0xd0400fff: good
found->	vendor=0x104c, dev=0x8031, revid=0x00
	bus=2, slot=6, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xd0401000, size 12, enabled
pcib3: requested memory range 0xd0401000-0xd0401fff: good
found->	vendor=0x104c, dev=0x8033, revid=0x00
	bus=2, slot=6, func=3
	class=01-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xd0402000, size 13, enabled
pcib3: requested memory range 0xd0402000-0xd0403fff: good
found->	vendor=0x104c, dev=0x8034, revid=0x00
	bus=2, slot=6, func=4
	class=08-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xd0404000, size  8, enabled
pcib3: requested memory range 0xd0404000-0xd04040ff: good
	map[14]: type Memory, range 32, base 0xd0405000, size  8, enabled
pcib3: requested memory range 0xd0405000-0xd04050ff: good
	map[18]: type Memory, range 32, base 0xd0406000, size  8, enabled
pcib3: requested memory range 0xd0406000-0xd04060ff: good
found->	vendor=0x104c, dev=0x8035, revid=0x00
	bus=2, slot=6, func=5
	class=07-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xd0407000, size 12, enabled
pcib3: requested memory range 0xd0407000-0xd0407fff: good
	map[14]: type Memory, range 32, base 0xd0408000, size 12, enabled
pcib3: requested memory range 0xd0408000-0xd0408fff: good
	map[18]: type Memory, range 32, base 0xd0409000, size 12, enabled
pcib3: requested memory range 0xd0409000-0xd0409fff: good
	map[1c]: type Memory, range 32, base 0xd040a000, size 12, enabled
pcib3: requested memory range 0xd040a000-0xd040afff: good
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xd0400000-0xd0400fff irq 11 at device 4.0 on pci2
iwi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0400000
iwi0: bpf attached
iwi0: Ethernet address: 00:15:00:3a:f8:2a
iwi0: bpf attached
iwi0: bpf attached
iwi0: [MPSAFE]
iwi0: [ITHREAD]
iwi0: auto rates: 
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0: <TI6411 PCI-CardBus Bridge> mem 0xd0401000-0xd0401fff irq 11 at device 6.0 on pci2
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0401000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: [ITHREAD]
cbb0: PCI Configuration space:
  0x00: 0x8031104c 0x02100007 0x06070000 0x00824010 
  0x10: 0xd0401000 0x020000a0 0x20030302 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0744010b 
  0x40: 0x0944103c 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x08441060 0x00000000 0x00070010 0x01111b22 
  0x90: 0x406402c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pci2: <mass storage> at device 6.3 (no driver attached)
pci2: <base peripheral> at device 6.4 (no driver attached)
pci2: <simple comms> at device 6.5 (no driver attached)
pcm0: <Intel ICH6 (82801FB)> port 0x2100-0x21ff,0x2200-0x223f mem 0xd0981000-0xd09811ff,0xd0982000-0xd09820ff irq 11 at device 30.2 on pci0
pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xd0981000
pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xd0982000
pcm0: [MPSAFE]
pcm0: [ITHREAD]
pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4
pcm0: ac97 codec dac ready count: 0
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Mixer "line1":
pcm0: Mixer "phin":
pcm0: Mixer "phout":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 1ec18000, 4000; 0xd4bfa000 -> 1ec18000
pcm0: sndbuf_setmap 1ec20000, 4000; 0xd4bfe000 -> 1ec20000
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2580-0x258f irq 10 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2580
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
ata1: [ITHREAD]
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pnpbios: 15 devices, largest 250 bytes
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: adding irq mask 0x2000
pnpbios: handle 1 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x1f7fffff, size=0x1f700000
pnpbios: handle 2 device ID PNP0c01 (010cd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 3 device ID PNP0a03 (030ad041)
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x80-0x8f, size=0x10, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: adding dma mask 0x10
pnpbios: handle 5 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: adding irq mask 0x1
pnpbios: handle 6 device ID PNP0100 (0001d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 7 device ID PNP0800 (0008d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: adding io range 0x72-0x72, size=0x1, align=0
PNP0b00: adding io range 0x73-0x73, size=0x1, align=0
PNP0b00: adding irq mask 0x100
pnpbios: handle 8 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: adding irq mask 0x2
pnpbios: handle 9 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 10 device ID PNP0f13 (130fd041)
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x2
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0
pnpbios: handle 11 device ID PNP0401 (0104d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: adding irq mask 0x8
pnpbios: handle 12 device ID PNP0501 (0105d041)
SMCf010: adding io range 0x3e8-0x3ef, size=0x8, align=0
SMCf010: adding io range 0x300-0x30f, size=0x10, align=0x10
SMCf010: adding irq mask 0x8
SMCf010: adding dma mask 0x8
pnpbios: handle 13 device ID SMCf010 (10f0a34d)
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0
pnpbios: handle 14 device ID PNP0e03 (030ed041)
PNP0c02: adding fixed memory32 range 0xfff0000-0x100effff, size=0x100000
PNP0c02: adding fixed memory32 range 0xffb0000-0x100b03ff, size=0x100400
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0
PNP0c02: adding io range 0x24-0x3f, size=0x1c, align=0
PNP0c02: adding io range 0x4e-0x4f, size=0x2, align=0
PNP0c02: adding io range 0x50-0x53, size=0x4, align=0
PNP0c02: adding io range 0x68-0x6f, size=0x8, align=0
PNP0c02: adding io range 0x74-0x77, size=0x4, align=0
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0
PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0
PNP0c02: adding io range 0xa4-0xbd, size=0x1a, align=0
PNP0c02: adding io range 0x510-0x51f, size=0x10, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0x1000-0x107f, size=0x80, align=0
PNP0c02: adding io range 0x1100-0x112f, size=0x30, align=0
PNP0c02: adding io range 0x1200-0x121f, size=0x20, align=0
pnpbios: handle 15 device ID PNP0c02 (020cd041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd2fff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x401 0x411 0x401 0x401
sio0: irq maps: 0x401 0x411 0x401 0x401
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x401 0x401 0x401 0x401
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9ffff pnpid PNP0c01 on isa0
unknown: <PNP0800> failed to probe at port 0x61 pnpid PNP0800 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 pnpid PNP0303 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 pnpid PNP0f13 on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f pnpid PNP0401 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff pnpid PNP0501 on isa0
sio4: irq maps: 0x401 0x409 0x401 0x401
sio4: irq maps: 0x401 0x409 0x401 0x401
sio4: <16550 or compatible> at port 0x3e8-0x3ef,0x300-0x30f irq 3 drq 3 pnpid SMCf010 on isa0
sio4: type 16550A
sio4: [FILTER]
unknown: <PNP0e03> failed to probe at port 0x3e0-0x3e1 irq 5 pnpid PNP0e03 on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> at iomem 0xfff0000-0x100effff pnpid PNP0c02 on isa0
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/20.00, addr 2> on uhub1
ums0: 3 buttons and Z dir.
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1729179705 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad0: setting PIO4 on ICH6 chip
ad0: setting UDMA100 on ICH6 chip
ad0: 57231MB <WDC WD600VE-00HDT0 09.07D09> at ata0-master UDMA100
ad0: 117210240 sectors [124032C/15H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
acd0: setting PIO4 on ICH6 chip
acd0: <UJDA765aDVD/CDRW/1.02> CDRW drive at ata0 as slave
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-R 120mm data disc
pcm0: measured ac97 link rate at 48006 Hz, will use 48000 Hz
ATA PseudoRAID loaded
WARNING: WITNESS option enabled, expect reduced performance.
GEOM_LABEL: Label for provider acd0 is iso9660/styabap.
Trying to mount root from ufs:/dev/ad0s3a
start_init: trying /sbin/init
bge0: link UP
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled
Linux ELF exec handler installed


More information about the freebsd-acpi mailing list