Amilo Pa1538: 7.0-current. ACPI problem
Мигда А А
migda.a at gmail.com
Wed Oct 24 10:48:45 PDT 2007
Hi,
I have a big problem on my laptop Fujitsu-Siemens Amilo Pa1538 with
FreeBSD-7.0-CURRENT-200710-amd64. System booting succesfully, but hang
on pressing any key (on enter login). Sometimes system boot and work
normally. Booting system whithout ACPI don't give good effect (system
don't mount root). Key power work always.
Thanks for any help.
Best regard, Migda A A
P.S. Excuse me for my bad english, I'm from Russia.
-------------- next part --------------
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT-200710 #0: Thu Oct 11 03:05:43 UTC 2007
root at myers.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80c1d000.
Calibrating clock(s) ... i8254 clock: 1193211 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1803775785 Hz
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-56 (1803.78-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40f82 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 2133716992 (2034 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
0x0000000000d1a000 - 0x000000007c314fff, 2069868544 bytes (505339 pages)
avail memory = 2059030528 (1963 MB)
ACPI APIC Table: <PTLTD APIC >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ACPI: RSDP @ 0x0xf89d0/0x0014 (v 0 PTLTD )
ACPI: RSDT @ 0x0x7ff64f8b/0x0040 (v 1 FSC PC 0x06040000 LTP 0x00000000)
ACPI: FACP @ 0x0x7ff69b58/0x0074 (v 1 NVIDIA MCP51M 0x06040000 PTL_ 0x000F4240)
ACPI: DSDT @ 0x0x7ff64fcb/0x4B8D (v 1 FIC PTB50 0x06040000 MSFT 0x0100000E)
ACPI: FACS @ 0x0x7ff6afc0/0x0040
ACPI: SLIC @ 0x0x7ff69bcc/0x0176 (v 1 FSC PC 0x06040000 LOHR 0x0000005A)
ACPI: SSDT @ 0x0x7ff69d42/0x01C4 (v 1 PTLTD POWERNOW 0x06040000 LTP 0x00000001)
ACPI: MCFG @ 0x0x7ff69f06/0x003C (v 1 PTLTD MCFG 0x06040000 LTP 0x00000000)
ACPI: HPET @ 0x0x7ff69f42/0x0038 (v 1 PTLTD HPETTBL 0x06040000 LTP 0x00000001)
ACPI: APIC @ 0x0x7ff69f7a/0x005E (v 1 PTLTD APIC 0x06040000 LTP 0x00000000)
ACPI: BOOT @ 0x0x7ff69fd8/0x0028 (v 1 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
null: <null device, zero device>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Oct 11 2007 03:03:58)
acpi0: <FSC PC> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
pci_open(1): mode 1 addr port (0x0cf8) is 0x80007004
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=050000] [hdr=80] is there (id=02f710de)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P44_ -> bus 0 dev 10 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P60_ -> bus 0 dev 10 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P64_ -> bus 0 dev 10 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P68_ -> bus 0 dev 10 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PIRQ -> bus 0 dev 10 func 0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 5 7 10 11 14 15
Validation 0 255 N 0 5 7 10 11 14 15
After Disable 0 255 N 0 5 7 10 11 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 5 7 10 11 14 15
Validation 0 11 N 0 5 7 10 11 14 15
After Disable 0 255 N 0 5 7 10 11 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 5 7 10 11 14 15
Validation 0 10 N 0 5 7 10 11 14 15
After Disable 0 255 N 0 5 7 10 11 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 5 7 10 11 14 15
Validation 0 255 N 0 5 7 10 11 14 15
After Disable 0 255 N 0 5 7 10 11 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19 20 21 22 23
Validation 0 255 N 0 16 17 18 19 20 21 22 23
After Disable 0 255 N 0 16 17 18 19 20 21 22 23
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x10de rev: 0x1 num: 7 hz: 25000000 opts: leg_route
Timecounter "HPET" frequency 25000000 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x10de, dev=0x02f7, revid=0xa2
domain=0, bus=0, slot=0, func=0
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x02fa, revid=0xa2
domain=0, bus=0, slot=0, func=1
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0100, statreg=0x4020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x02fe, revid=0xa2
domain=0, bus=0, slot=0, func=2
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x02f8, revid=0xa2
domain=0, bus=0, slot=0, func=3
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x02f9, revid=0xa2
domain=0, bus=0, slot=0, func=4
class=05-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x02ff, revid=0xa2
domain=0, bus=0, slot=0, func=5
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x027f, revid=0xa2
domain=0, bus=0, slot=0, func=6
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0100, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x027e, revid=0xa2
domain=0, bus=0, slot=0, func=7
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x02fc, revid=0xa1
domain=0, bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x02fd, revid=0xa1
domain=0, bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x02fb, revid=0xa1
domain=0, bus=0, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0270, revid=0xa2
domain=0, bus=0, slot=9, func=0
class=05-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0260, revid=0xa3
domain=0, bus=0, slot=10, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0264, revid=0xa3
domain=0, bus=0, slot=10, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0x3040, size 6, enabled
map[24]: type I/O Port, range 32, base 0x3000, size 6, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.LSMB:0)
pci_link8: Picked IRQ 16 with weight 0
pcib0: slot 10 INTA routed to irq 16 via \\_SB_.PCI0.LSMB
found-> vendor=0x10de, dev=0x0271, revid=0xa3
domain=0, bus=0, slot=10, func=3
class=0b-40-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=11
map[10]: type Memory, range 32, base 0xc0040000, size 18, enabled
pcib0: matched entry for 0.10.INTB (src \\_SB_.PCI0.LPMU:0)
pci_link9: Picked IRQ 17 with weight 0
pcib0: slot 10 INTB routed to irq 17 via \\_SB_.PCI0.LPMU
found-> vendor=0x10de, dev=0x026d, revid=0xa3
domain=0, bus=0, slot=11, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xc0004000, size 12, enabled
pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.LUS0:0)
pci_link10: Picked IRQ 18 with weight 0
pcib0: slot 11 INTA routed to irq 18 via \\_SB_.PCI0.LUS0
found-> vendor=0x10de, dev=0x026e, revid=0xa3
domain=0, bus=0, slot=11, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xc0005000, size 8, enabled
pcib0: matched entry for 0.11.INTB (src \\_SB_.PCI0.LUS2:0)
pci_link11: Picked IRQ 19 with weight 0
pcib0: slot 11 INTB routed to irq 19 via \\_SB_.PCI0.LUS2
found-> vendor=0x10de, dev=0x0265, revid=0xf1
domain=0, bus=0, slot=13, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0x3080, size 4, enabled
found-> vendor=0x10de, dev=0x0266, revid=0xf1
domain=0, bus=0, slot=14, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0x30b0, size 3, enabled
map[14]: type I/O Port, range 32, base 0x30a4, size 2, enabled
map[18]: type I/O Port, range 32, base 0x30a8, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x30a0, size 2, enabled
map[20]: type I/O Port, range 32, base 0x3090, size 4, enabled
map[24]: type Memory, range 32, base 0xc0006000, size 12, memory disabled
pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.LTID:0)
pci_link15: Picked IRQ 20 with weight 0
pcib0: slot 14 INTA routed to irq 20 via \\_SB_.PCI0.LTID
found-> vendor=0x10de, dev=0x026f, revid=0xa2
domain=0, bus=0, slot=16, func=0
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found-> vendor=0x10de, dev=0x026c, revid=0xa2
domain=0, bus=0, slot=16, func=1
class=04-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit, vector masks
map[10]: type Memory, range 32, base 0xc0000000, size 14, enabled
pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.LAZA:0)
pci_link13: Picked IRQ 21 with weight 0
pcib0: slot 16 INTB routed to irq 21 via \\_SB_.PCI0.LAZA
found-> vendor=0x10de, dev=0x0269, revid=0xa3
domain=0, bus=0, slot=20, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xc0007000, size 12, enabled
map[14]: type I/O Port, range 32, base 0x30b8, size 3, enabled
pcib0: matched entry for 0.20.INTA (src \\_SB_.PCI0.LMAC:0)
pci_link12: Picked IRQ 22 with weight 0
pcib0: slot 20 INTA routed to irq 22 via \\_SB_.PCI0.LMAC
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x4000-0x4fff
pcib1: memory decode 0xc0200000-0xc03fffff
pcib1: prefetched decode 0xc3200000-0xc33fffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib2: domain 0
pcib2: secondary bus 3
pcib2: subordinate bus 3
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xc0400000-0xc04fffff
pcib2: no prefetched decode
pci3: <ACPI PCI bus> on pcib2
pci3: domain=0, physical bus=3
found-> vendor=0x168c, dev=0x001c, revid=0x01
domain=0, bus=3, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xc0400000, size 16, enabled
pcib2: requested memory range 0xc0400000-0xc040ffff: good
pcib2: matched entry for 3.0.INTA (src \\_SB_.PCI0.LK1E:0)
pci_link4: Picked IRQ 23 with weight 0
pcib2: slot 0 INTA routed to irq 23 via \\_SB_.PCI0.LK1E
ath0: <Atheros 5424/2424> mem 0xc0400000-0xc040ffff irq 23 at device 0.0 on pci3
ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xc0400000
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 49
ath0: [MPSAFE]
ath0: [ITHREAD]
ath0: hal channel 2412/a0 -> 1
ath0: hal channel 2412/c0 -> 1
ath0: hal channel 2417/a0 -> 2
ath0: hal channel 2417/c0 -> 2
ath0: hal channel 2422/a0 -> 3
ath0: hal channel 2422/c0 -> 3
ath0: hal channel 2427/a0 -> 4
ath0: hal channel 2427/c0 -> 4
ath0: hal channel 2432/a0 -> 5
ath0: hal channel 2432/c0 -> 5
ath0: hal channel 2437/a0 -> 6
ath0: hal channel 2437/c0 -> 6
ath0: hal channel 2442/a0 -> 7
ath0: hal channel 2442/c0 -> 7
ath0: hal channel 2447/a0 -> 8
ath0: hal channel 2447/c0 -> 8
ath0: hal channel 2452/a0 -> 9
ath0: hal channel 2452/c0 -> 9
ath0: hal channel 2457/a0 -> 10
ath0: hal channel 2457/c0 -> 10
ath0: hal channel 2462/a0 -> 11
ath0: hal channel 2462/c0 -> 11
ath0: hal channel 2467/a0 -> 12
ath0: hal channel 2467/c0 -> 12
ath0: hal channel 2472/a0 -> 13
ath0: hal channel 2472/c0 -> 13
ath0: using obsoleted if_watchdog interface
ath0: bpf attached
ath0: Ethernet address: 00:c0:a8:eb:e6:fc
ath0: bpf attached
ath0: bpf attached
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 10.0 phy 6.1 radio 10.2
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib3: domain 0
pcib3: secondary bus 5
pcib3: subordinate bus 5
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xc1000000-0xc2ffffff
pcib3: prefetched decode 0xd0000000-0xdfffffff
pci5: <ACPI PCI bus> on pcib3
pci5: domain=0, physical bus=5
found-> vendor=0x10de, dev=0x01d8, revid=0xa1
domain=0, bus=5, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xc2000000, size 24, enabled
pcib3: requested memory range 0xc2000000-0xc2ffffff: good
map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib3: requested memory range 0xd0000000-0xdfffffff: good
map[1c]: type Memory, range 64, base 0xc1000000, size 24, enabled
pcib3: requested memory range 0xc1000000-0xc1ffffff: good
pcib3: matched entry for 5.0.INTA (src \\_SB_.PCI0.LK1E:0)
pcib3: slot 0 INTA routed to irq 23 via \\_SB_.PCI0.LK1E
vgapci0: <VGA-compatible display> mem 0xc2000000-0xc2ffffff,0xd0000000-0xdfffffff,0xc1000000-0xc1ffffff irq 23 at device 0.0 on pci5
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <processor> at device 10.3 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xc0004000-0xc0004fff irq 18 at device 11.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0004000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 50
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc0005000-0xc00050ff irq 19 at device 11.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xc0005000
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 51
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 8 ports with 8 removable, self powered
atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3080-0x308f at device 13.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3080
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 52
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=60 ostat1=70
ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 53
ata1: [MPSAFE]
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x30b0-0x30b7,0x30a4-0x30a7,0x30a8-0x30af,0x30a0-0x30a3,0x3090-0x309f mem 0xc0006000-0xc0006fff irq 20 at device 14.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3090
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 54
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xc0006000
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x30b0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x30a4
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x30a8
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x30a0
ata3: SATA connect status=00000000
ata3: [MPSAFE]
ata3: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pcib4: domain 0
pcib4: secondary bus 7
pcib4: subordinate bus 7
pcib4: I/O decode 0x5000-0x5fff
pcib4: memory decode 0xc3000000-0xc30fffff
pcib4: no prefetched decode
pcib4: Subtractively decoded bridge.
ACPI: Found matching pin for 7.6.INTA at func 0: 10
pci7: <ACPI PCI bus> on pcib4
pci7: domain=0, physical bus=7
found-> vendor=0x1106, dev=0x3044, revid=0xc0
domain=0, bus=7, slot=6, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D2 D3 current D0
map[10]: type Memory, range 32, base 0xc3000000, size 11, enabled
pcib4: requested memory range 0xc3000000-0xc30007ff: good
map[14]: type I/O Port, range 32, base 0x5000, size 7, enabled
pcib4: requested I/O range 0x5000-0x507f: in range
pcib4: matched entry for 7.6.INTA (src \\_SB_.PCI0.LNK1:0)
ioapic0: Changing trigger for pin 10 to level
ioapic0: Changing polarity for pin 10 to low
pcib4: slot 6 INTA routed to irq 10 via \\_SB_.PCI0.LNK1
fwohci0: <VIA Fire II (VT6306)> port 0x5000-0x507f mem 0xc3000000-0xc30007ff irq 10 at device 6.0 on pci7
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xc3000000
ioapic0: routing intpin 10 (ISA IRQ 10) to vector 55
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:40:ca:01:3f:01:f7:47
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x118c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:40:ca:01:f7:47
fwe0: bpf attached
fwe0: Ethernet address: 02:40:ca:01:f7:47
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:40:ca:01:3f:01:f7:47 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
pci0: <multimedia> at device 16.1 (no driver attached)
nfe0: <NVIDIA nForce 430 MCP13 Networking Adapter> port 0x30b8-0x30bf mem 0xc0007000-0xc0007fff irq 22 at device 20.0 on pci0
nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0007000
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1118 Gigabit PHY> PHY 1 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nfe0: bpf attached
nfe0: Ethernet address: 00:14:0b:0d:17:4b
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 56
nfe0: [MPSAFE]
nfe0: [FILTER]
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 58
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 59
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
ums0: <Genius Optical Mouse, class 0/0, rev 1.10/1.00, addr 2> on uhub0
ums0: 3 buttons and Z dir.
Device configuration finished.
Reducing kern.maxvnodes 132537 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100209777 hz
Timecounter "TSC" frequency 1803775785 Hz quality -100
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
lo0: bpf attached
rr232x: no controller detected.
acpi_tz0: _AC1: temperature 82.8 >= setpoint 57.3
acpi_tz0: _AC0: temperature 82.8 >= setpoint 67.3
acpi_tz0: switched from NONE to _AC0: 82.8C
acpi_tz0: _AC1: temperature 82.8 >= setpoint 57.3
acpi_tz0: _AC1: temperature 82.8 >= setpoint 57.3
acpi_tz0: temperature 82.8C: decreasing clock speed from 1800 MHz to 1600 MHz
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
acpi_tz0: _AC1: temperature 82.8 >= setpoint 57.3
acpi_tz0: _AC1: temperature 82.8 >= setpoint 57.3
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on nForce MCP51 chip
acd0: setting UDMA33 on nForce MCP51 chip
acd0: <PBDS DS-8A1P/CF12> DVDR drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 152627MB <WDC WD1600BEVS-07RST0 04.01G04> at ata2-master SATA150
ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: nVidia check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
GEOM_LABEL: Label for provider ad4s1 is ntfs/VISTA.
GEOM_LABEL: Label for provider ad4s2 is ntfs/DATA.
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 10 to local APIC 1
ioapic0: Assigning ISA IRQ 12 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 1
ioapic0: Assigning ISA IRQ 15 to local APIC 0
ioapic0: Assigning PCI IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 20 to local APIC 1
ioapic0: Assigning PCI IRQ 22 to local APIC 0
ioapic0: Assigning PCI IRQ 23 to local APIC 1
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad4s3a
start_init: trying /sbin/init
Loading configuration files.
kernel dumps on /dev/ad4s3b
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
swapon: adding /dev/ad4s3b as swap device
Starting file system checks:
/dev/ad4s3a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s3a: clean, 154803 free (2459 frags, 19043 blocks, 1.0% fragmentation)
/dev/ad4s3e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s3e: clean, 253813 free (21 frags, 31724 blocks, 0.0% fragmentation)
/dev/ad4s3f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s3f: clean, 7910500 free (26748 frags, 985469 blocks, 0.3% fragmentation)
/dev/ad4s3d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s3d: clean, 1513210 free (114 frags, 189137 blocks, 0.0% fragmentation)
Setting hostuuid: 0043c6e4-2c64-0010-b108-a2d9f8a502f8.
Setting hostid: 0x44519c58.
Mounting local file systems:
.
/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
net.inet6.ip6.auto_linklocal:
1
->
0
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
Additional routing options:
.
Starting devd.
Starting ums0 moused:
mousechar_start
.
hw.acpi.cpu.cx_lowest:
C1
->
C1
Generating host.conf.
Additional IP options:
.
Mounting NFS file systems:
.
Creating and/or trimming log files:
.
Starting syslogd.
Checking for core dump on /dev/ad4s3b...
savecore: no dumps found
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
32-bit compatibility ldconfig path: /usr/lib32
ldconfig:
warning: /usr/lib32
:
No such file or directory
Initial amd64 initialization:
.
Additional ABI support:
.
Clearing /tmp (X related).
Starting local daemons:
.
Updating motd
.
Mounting late file systems:
.
Configuring syscons:
keymap
keyrate
scrnmap
font8x16
font8x14
font8x8
blanktime
screensaver
splash: image decoder found: daemon_saver
.
Starting cron.
Local package initialization:
.
Starting default moused:
mousechar_start
.
Starting background file system checks in 60 seconds.
Mon Oct 22 21:36:39 MSD 2007
acpi_tz0: _AC1: temperature 80.8 >= setpoint 57.3
acpi_tz0: temperature 81.8C: decreasing clock speed from 1600 MHz to 800 MHz
acpi_tz0: _AC1: temperature 73.8 >= setpoint 57.3
acpi_tz0: temperature 68.8C: increasing clock speed from 800 MHz to 1600 MHz
acpi_tz0: _AC1: temperature 68.8 >= setpoint 57.3
Oct 22 21:37:03 login: ROOT LOGIN (root) ON ttyv1
acpi_tz0: _AC1: temperature 78.8 >= setpoint 57.3
-------------- next part --------------
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 0
hw.acpi.cpu.cx_lowest: C1
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.user_override: 0
hw.acpi.thermal.tz0.temperature: 56.8C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 73.8C
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 108.8C
hw.acpi.thermal.tz0._ACx: 67.3C 57.3C -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.acline: 1
hw.acpi.battery.life: 89
hw.acpi.battery.time: -1
hw.acpi.battery.state: 2
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
More information about the freebsd-acpi
mailing list