Compaq Presario V3000

[Nate Lawson]

> On Mar 18, 2007, at 6:59 PM, Abdullah Ibn Hamad Al-Marri wrote:
> 
>> On 3/18/07, David Schulz <mailinglists at tca-cable-connector.com> wrote:
>>> Hello all,
>>>
>>> i have a Compaq Presario V3000. After installing FreeBSD i am getting
>>> these type of Messages to my Log.
>>>
>>>      ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
>>> AE_NO_HARDWARE_RESPONSE
>>>      ACPI-1304: *** Error: Method execution failed [\
>>> \_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc32a1ca0), AE_NO_HARDWARE_RESPONSE
>>>      ACPI-1304: *** Error: Method execution failed [\
>>> \_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc32a1b60),
>>> AE_NO_HARDWARE_RESPONSE
>>>
>>> I have attached my full dmesg output in dmesg.txt.
>>>
>>> Is there any way of resolving this? Basically, these Messages
>>> continue to appear at maybe 30 second interval.
>>>
>>> Thanks a lot,
>>> David
>>
>> Hello,
>>
>> You may need to check [HEADSUP] ACPI-CA 20070126 import  thread.
>
> So this means there is a patch out somewhere that could fix this? could
> i apply that patch to 6.2 ?
>
> Thanks,
> David
>

I recently committed a major reworking of the embedded controller
driver in -current.  See this message:

http://lists.freebsd.org/pipermail/freebsd-current/2007-February/069525.html

It includes a patch to try for 6.x.  You may need to tweak the various
parameters, again, see the message.

-- 
Nate