ACPI errors on Samsung Q35 Notebook

Thu Mar 8 08:14:31 UTC 2007

Hi!

I've installed the system:
FreeBSD 6.2-RELEASE-p1.

The Notebook is a Samsung Q35 Calvin T5500 Core 2 Duo.

Booting the system, I get acpi errors like
"acpi_bus_number: can't get _ADR":

************************************************************************

dmesg-output:

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p1 #2: Sun Feb 25 11:45:02 CET 2007
     kater at FreeBSD_TWS29:/usr/obj/usr/src/sys/MYKERNEL62
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
ACPI APIC Table: <INTEL  CALISTGA>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz (1662.51-MHz 
686-class CPU)
   Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,<b9>,CX16,<b14>,<b15>>
   AMD Features=0x20000000<LM>
   AMD Features2=0x1<LAHF>
   Cores per package: 2
real memory  = 1063845888 (1014 MB)
avail memory = 1031843840 (984 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD Capell00> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> port 0x1800-0x1807 
mem 0xd8100000-0xd817ffff,0xc0000000-0xcfffffff,0xd8200000-0xd823ffff 
irq 16 at device 2.0 on pci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
drmsub0: <Intel i945GM>: (child of agp_i810.c) on agp0
info: [drm] AGP at 0xd8100000 0MB
info: [drm] Initialized i915 1.4.0 20060119
pci0: <display> at device 2.1 (no driver attached)
pcm0: <Intel 82801G High Definition Audio Controller> mem 
0xd8240000-0xd8243fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xd4000000-0xd4000fff irq 16 
at device 0.0 on pci2
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
bus_dmamem_alloc failed to align memory properly.
channel 1 pwr1 0x0086 pwr2 0x0086
channel 2 pwr1 0x0086 pwr2 0x0087
channel 3 pwr1 0x009f pwr2 0x009f
channel 4 pwr1 0x009f pwr2 0x00a0
channel 5 pwr1 0x0000 pwr2 0x0000
channel 6 pwr1 0x0082 pwr2 0x0082
channel 7 pwr1 0x0082 pwr2 0x0082
channel 8 pwr1 0x007a pwr2 0x0078
channel 9 pwr1 0x0078 pwr2 0x007b
channel 10 pwr1 0x0000 pwr2 0x0000
channel 11 pwr1 0x0004 pwr2 0x0004
channel 12 pwr1 0xfffd pwr2 0xfffd
channel 13 pwr1 0x0004 pwr2 0x0004
channel 14 pwr1 0xfffd pwr2 0xfffd
wpi0: Ethernet address: 00:18:de:10:8e:63
wpi0: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at 
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at 
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at 
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at 
device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib3
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xd8000000-0xd8001fff irq 
22 at device 5.0 on pci5
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:13:77:27:bc:5f
bfe0: [GIANT-LOCKED]
pci5: <bridge, PCI-CardBus> at device 9.0 (no driver attached)
fwohci0: <Ricoh R5C552> mem 0xd8002000-0xd80027ff at device 9.1 on pci5
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:f0:41:01:03:c0:a3
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:f0:03:c0:a3
fwe0: Ethernet address: 02:00:f0:03:c0:a3
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci5: <base peripheral> at device 9.2 (no driver attached)
pci5: <base peripheral> at device 9.3 (no driver attached)
pci5: <base peripheral> at device 9.4 (no driver attached)
pci5: <base peripheral> at device 9.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x3000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xdc000-0xdffff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 
1.10/3.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ugen0: Broadcom Corp BCM92045NMD, rev 2.00/1.00, addr 2
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ad0: 88119MB <HTS541010G9AT00 MBZOA60A> at ata0-master UDMA100
acd0: DVDR <TSSTcorpCD/DVDW TS-L632D/SC02> at ata0-slave UDMA33
pcm0: <HDA Codec: Analog Device AD1986A>
pcm0: <HDA Driver Revision: 20061210_0037>
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 1 lun 0
cd0: <TSSTcorp CD/DVDW TS-L632D SC02> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present 
- tray closed
Trying to mount root from ufs:/dev/ad0s1a

************************************************************************

sysctl hw.acpi-output:

hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 0
hw.acpi.reset_video: 0
hw.acpi.cpu.cx_supported: C1/1
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00%
hw.acpi.acline: 1
hw.acpi.battery.life: 100
hw.acpi.battery.time: -1
hw.acpi.battery.state: 0
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.user_override: 0
hw.acpi.thermal.tz0.temperature: 45.0C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 95.0C
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 95.0C
hw.acpi.thermal.tz0._ACx: 55.0C -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz1.temperature: 45.0C
hw.acpi.thermal.tz1.active: -1
hw.acpi.thermal.tz1.passive_cooling: 0
hw.acpi.thermal.tz1.thermal_flags: 0
hw.acpi.thermal.tz1._PSV: -1
hw.acpi.thermal.tz1._HOT: -1
hw.acpi.thermal.tz1._CRT: 95.0C
hw.acpi.thermal.tz1._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1

************************************************************************

Is it possible to fix this?

Thanks in advance, Helko