(no subject)

Wed Jul 11 19:44:13 UTC 2007

Ivaylo Mateev wrote:
>             ,
> 
> I have some Problems when I power off or reboot my Computer.
> 
> It doesn't matter if I do "reboot", "halt", "shutdown -p now". The
> Computer stay on
> with the Message:
> All Bufferes synced
> Uptime XXXXXXXX
> 
> Everything seems to be O.K. but it just wont power off or reboot

We are investigating problems in the VIA chipset that cause this
behavior.  What is the manufacturer and model of your computer?

-Nate

> 
> -----------------------
> hier dmesg
> 
> Copyright (c) 1992-2007 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>     The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 6.2-STABLE #4: Tue Jul 10 14:46:47 CEST 2007
>     root@:/usr/obj/usr/src/sys/HEAVYMETAL
> ACPI APIC Table: <Nvidia AWRDACPI>
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2375.02-MHz
> 686-class CPU)
>   Origin = "AuthenticAMD"  Id = 0x40fb2  Stepping = 2
>  
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
> 
>   Features2=0x2001<SSE3,CX16>
>   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
>   AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8>
>   Cores per package: 2
> real memory  = 804192256 (766 MB)
> avail memory = 769056768 (733 MB)
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0: Changing APIC ID to 2
> ioapic0 <Version 1.1> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <Nvidia AWRDACPI> on motherboard
> acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff on
> acpi0
> Timecounter "HPET" frequency 25000000 Hz quality 2000
> acpi0: Power Button (fixed)
> acpi0: reservation of feff0000, 100 (3) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <memory, RAM> at device 0.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 1.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
> pci0: <memory, RAM> at device 1.2 (no driver attached)
> ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21
> at device 2.0 on pci0
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 5 ports with 5 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq
> 22 at device 2.1 on pci0
> ehci0: [GIANT-LOCKED]
> usb1: EHCI version 1.0
> usb1: companion controller, 12 ports each: usb0
> usb1: <EHCI (generic) USB 2.0 controller> on ehci0
> usb1: USB revision 2.0
> uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub1: 5 ports with 5 removable, self powered
> ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 23
> at device 4.0 on pci0
> ohci1: [GIANT-LOCKED]
> usb2: OHCI version 1.0, legacy support
> usb2: <OHCI (generic) USB controller> on ohci1
> usb2: USB revision 1.0
> uhub2: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 5 ports with 5 removable, self powered
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq
> 20 at device 4.1 on pci0
> ehci1: [GIANT-LOCKED]
> usb3: EHCI version 1.0
> usb3: companion controller, 12 ports each: usb2
> usb3: <EHCI (generic) USB 2.0 controller> on ehci1
> usb3: USB revision 2.0
> uhub3: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub3: 5 ports with 5 removable, self powered
> atapci0: <GENERIC ATA controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pcm0: <NVidia (Unknown) High Definition Audio Controller> mem
> 0xfe020000-0xfe023fff irq 21 at device 7.0 on pci0
> pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> atapci1: <GENERIC ATA controller> port
> 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem
> 0xfe026000-0xfe027fff irq 22 at device 9.0 on pci0
> ata2: <ATA channel 0> on atapci1
> ata3: <ATA channel 1> on atapci1
> nfe0: <NVIDIA nForce MCP67 Networking Adapter> port 0xd800-0xd807 mem
> 0xfe02b000-0xfe02bfff,0xfe02a000-0xfe02a0ff,0xfe029000-0xfe02900f irq 23
> at device 10.0 on pci0
> miibus0: <MII bus> on nfe0
> e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus0
> e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseTX-FDX, auto
> nfe0: Ethernet address: 00:50:8d:9f:27:19
> nfe0: [FAST]
> pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> pcib6: <ACPI PCI-PCI bridge> at device 15.0 on pci0
> pci6: <ACPI PCI bus> on pcib6
> pcib7: <ACPI PCI-PCI bridge> at device 16.0 on pci0
> pci7: <ACPI PCI bus> on pcib7
> pcib8: <ACPI PCI-PCI bridge> at device 17.0 on pci0
> pci8: <ACPI PCI bus> on pcib8
> nvidia0: <GeForce 7025 / NVIDIA nForce 630a> mem
> 0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq 20
> at device 18.0 on pci0
> nvidia0: [GIANT-LOCKED]
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 8250 or not responding
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> Timecounters tick every 1.000 msec
> acd0: DVDROM <TEAC DV-516GA/G4S3> at ata0-master UDMA33
> ad7: 152627MB <SAMSUNG HD161HJ JF100-15> at ata3-slave UDMA33
> pcm0: <HDA Codec: Realtek ALC888>
> pcm0: <HDA Driver Revision: 20070619_0045>
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/ad7s1a
> ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
> ums0: 3 buttons and Z dir.
> umass0: USBest Technology USB Mass Storage Device, rev 2.00/1.00, addr 2
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <JetFlash TS1GJFV10 0.00> Removable Direct Access SCSI-2 device
> da0: 40.000MB/s transfers
> da0: 983MB (2015231 512 byte sectors: 64H 32S/T 983C)