Supermicro Boot Lockup with ACPI enabled

[Sean Bruno]

I am using RELENG6_2 on a Supermicro 5015P-TR that has a model PDSMP-I 
motherboard.  It currently locks up when booting the system with ACPI 
enabled in the BIOS and at the same time a card(I've tried an Adaptec 
29160, 29320 and a Qlogic F/C 2342) in either PCI-X slot.

If I deselect ACPI in the BIOS, the system boots and all is well.  If I 
remove the expansion cards, I can boot with ACPI enabled and all is 
well.  I can then dump the DSDT to look for errors.  I don't see 
anything obvious and I'm not sure how to proceed.

I'm looking to see how I can find the error in the DSDT and report it to 
supermicro, but I can't see anything wrong with the tables that I have 
attached to the email.  There doesn't appear to be any updates to the 
BIOS for this system either.  Any ideas?

Sean
-------------- next part --------------
/*
  RSD PTR: OEM=PTLTD, ACPI_Rev=1.0x (0)
	RSDT=0x1fee3fa0, cksum=77
 */
/*
  RSDT: Length=56, Revision=1, Checksum=132,
	OEMID=PTLTD, OEM Table ID=  RSDT, OEM Revision=0x6040000,
	Creator ID= LTP, Creator Revision=0x0
	Entries={ 0x1fee8ea8, 0x1fee8f1c, 0x1fee8f58, 0x1fee8fd8, 0x1fee3fd8 }
 */
/*
  FACP: Length=116, Revision=1, Checksum=94,
	OEMID=INTEL, OEM Table ID=, OEM Revision=0x6040000,
	Creator ID=PTL, Creator Revision=0x3
 	FACS=0x1fee9fc0, DSDT=0x1fee4392
	INT_MODEL=PIC
	Preferred_PM_Profile=Unspecified (0)
	SCI_INT=9
	SMI_CMD=0xb2, ACPI_ENABLE=0xf0, ACPI_DISABLE=0xf1, S4BIOS_REQ=0x0
	PSTATE_CNT=0x80
	PM1a_EVT_BLK=0x1000-0x1003
	PM1a_CNT_BLK=0x1004-0x1005
	PM2_CNT_BLK=0x1020-0x1020
	PM_TMR_BLK=0x1008-0x100b
	GPE0_BLK=0x1028-0x102f
	P_LVL2_LAT=101 us, P_LVL3_LAT=1001 us
	FLUSH_SIZE=0, FLUSH_STRIDE=0
	DUTY_OFFSET=1, DUTY_WIDTH=3
	DAY_ALRM=13, MON_ALRM=0, CENTURY=50
	IAPC_BOOT_ARCH=
	Flags={WBINVD,PROC_C1,SLP_BUTTON,RTC_S4}
 */
/*
  FACS:	Length=64, HwSig=0x00000000, Firm_Wake_Vec=0x00000000
	Global_Lock=
	Flags=
	Version=0
 */
/*
  DSDT: Length=19222, Revision=1, Checksum=11,
	OEMID=INTEL, OEM Table ID=GLENWOOD, OEM Revision=0x6040000,
	Creator ID=MSFT, Creator Revision=0x100000e
 */
/*
  MCFG: Length=60, Revision=1, Checksum=78,
	OEMID=PTLTD, OEM Table ID=  MCFG, OEM Revision=0x6040000,
	Creator ID= LTP, Creator Revision=0x0

	Base Address= 0x00000000f0000000
	Segment Group= 0x0000
	Start Bus= 0
	End Bus= 9
 */
/*
  APIC: Length=128, Revision=1, Checksum=2,
	OEMID=PTLTD, OEM Table ID=	 APIC, OEM Revision=0x6040000,
	Creator ID= LTP, Creator Revision=0x0
	Local APIC ADDR=0xfee00000
	Flags={PC-AT}

	Type=Local APIC
	ACPI CPU=0
	Flags={ENABLED}
	APIC ID=0

	Type=Local APIC
	ACPI CPU=1
	Flags={ENABLED}
	APIC ID=1

	Type=IO APIC
	APIC ID=2
	INT BASE=0
	ADDR=0x00000000fec00000

	Type=IO APIC
	APIC ID=3
	INT BASE=24
	ADDR=0x00000000fec80000

	Type=IO APIC
	APIC ID=4
	INT BASE=48
	ADDR=0x00000000fec80400

	Type=INT Override
	BUS=0
	IRQ=0
	INTR=2
	Flags={Polarity=active-hi, Trigger=edge}

	Type=INT Override
	BUS=0
	IRQ=9
	INTR=9
	Flags={Polarity=active-hi, Trigger=level}

	Type=Local NMI
	ACPI CPU=0
	LINT Pin=1
	Flags={Polarity=active-hi, Trigger=edge}

	Type=Local NMI
	ACPI CPU=1
	LINT Pin=1
	Flags={Polarity=active-hi, Trigger=edge}
 */
/*
  BOOT: Length=40, Revision=1, Checksum=164,
	OEMID=PTLTD, OEM Table ID=$SBFTBL$, OEM Revision=0x6040000,
	Creator ID= LTP, Creator Revision=0x1
 */
/*
  SSDT: Length=954, Revision=1, Checksum=118,
	OEMID=PmRef, OEM Table ID=CpuPm, OEM Revision=0x3000,
	Creator ID=INTL, Creator Revision=0x20030224
 */
-------------- next part --------------
A non-text attachment was scrubbed...
Name: acpi.dsdt
Type: application/octet-stream
Size: 20139 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-acpi/attachments/20070815/53058392/acpi.obj