Reboot hangs if ACPI is enabled

Fri Mar 10 10:44:36 UTC 2006

Hi all,

For last few days I worked on installation of FreeBSD 6.0 amd64 with SMP and
PPS_SYNC options on my server. System worked stable. The server configuration is:
- IntelŽ Server Board SE7520AF2
- 2 x Xeon 3.0Ghz
- 3 x disk SCSI used with on-board SCSI Controller(RAID 5 configuration)

The problem is that if ACPI is enabled, invoking the commands:
    reboot, shutdown -r now
hangs server after message "Shutting down ACPI". The only way to start
server is to press power button. I have upgraded BIOS version for
the motherboard and server still hangs. I have searched for some
solutions but with no effect. Any help would be appreciated.

Bellow is shown dmesg output:

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p5 #5: Fri Mar 10 10:39:26 CET 2006 :/usr/obj/usr/src/sys/PPS-SMP
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.51-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0xf43  Stepping = 3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  Hyperthreading: 2 logical CPUs
real memory  = 2147352576 (2047 MB)
avail memory = 2062901248 (1967 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
ioapic4 <Version 2.0> irqs 96-119 on motherboard
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 7 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 15 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
cpu2: <ACPI CPU> on acpi0
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
cpu3: <ACPI CPU> on acpi0
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci7: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci9: <ACPI PCI bus> on pcib2
pci7: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci7
pci8: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0xe880-0xe8bf mem 0xfeba0000-0xfebbffff irq 52 at device 4.0 on pci8
em0: Ethernet address: 00:07:e9:33:1f:76
em0:  Speed:N/A  Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0xec00-0xec3f mem 0xfebe0000-0xfebfffff irq 53 at device 4.1 on pci8
em1: Ethernet address: 00:07:e9:33:1f:77
em1:  Speed:N/A  Duplex:N/A
pci7: <base peripheral, interrupt controller> at device 0.3 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci6: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci0
pci2: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci4: <ACPI PCI bus> on pcib7
amr0: <LSILogic MegaRAID 1.51> mem 0xfbff0000-0xfbffffff,0xfe9c0000-0xfe9fffff irq 86 at device 14.0 on pci4
amr0: <LSILogic Intel(R) RAID Controller SROMBU42E> Firmware 514O, BIOS H431, 256MB RAM
pci2: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 0.2 on pci2
pci3: <ACPI PCI bus> on pcib8
pci2: <base peripheral, interrupt controller> at device 0.3 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbc00-0xbc1f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc000-0xc01f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc080-0xc09f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfcfffc00-0xfcffffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib9
pci1: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
device_attach: fdc0 attach returned 12
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
device_attach: fdc0 attach returned 12
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xcd000-0xcdfff,0xce000-0xcefff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: DVDROM <LITE-ON DVD SOHD-16P9S/FS09> at ata0-slave UDMA33
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 68664MB (140623872 sectors) RAID 5 (optimal)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from ufs:/dev/amrd0s1a

-- 
____________________________________________________________________
Łukasz Dolata            Network Research and Development
ldolata at man.poznan.pl    Poznan Supercomputing and Networking Center
+48 61 858 20 28         www.man.poznan.pl
______________________________________________________________________