i386/89545: Compaq DL 360 ACPI will not boot with ACPI enabled
ravi pina
ravi at cow.org
Sat Jan 7 12:27:38 PST 2006
i manually applied pci_link_printf.patch-anders to 6.0-STABLE
and my SMP compiled kernel boots fine. i thought it is
noteworthy that the system pauses for >60s at line
ioapic0: routing intpin 24 (PCI IRQ 24) to cluster 0
of the attached boot -v log. this may be normal behavior,
but this is the first successful SMP+ACPI boot in 6.0 for me.
i have also attached a sysctl output.
thanks,
-r
--
+++ATH
7MN; {{{
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #0: Sat Jan 7 14:12:22 EST 2006 ravi at happy.cow.org:/usr/obj/usr/src/sys/NEU-COW
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0aa4000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0aa4194.
MP Configuration Table version 1.4 found at 0xc00fbeca
Table 'FACP' at 0x3fffc040
Table 'APIC' at 0x3fffc100
MADT: Found table at 0x3fffc100
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
MADT: Found CPU APIC ID 2 ACPI ID 2: disabled
MADT: Found CPU APIC ID 3 ACPI ID 3: enabled
SMP: Added CPU 3 (AP)
ACPI APIC Table: <COMPAQ 00000083>
Calibrating clock(s) ... i8254 clock: 1193107 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 996849346 Hz
CPU: Intel Pentium III (996.85-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073725440 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000003edc3fff, 1041874944 bytes (254364 pages)
avail memory = 1041620992 (993 MB)
APIC ID: physical 0, logical 0:0
APIC ID: physical 3, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 3
cpu1 (AP): APIC ID: 0
bios32: Found BIOS32 Service Directory header at 0xc00ffee0
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x94
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 3
APIC: CPU 1 has ACPI ID 0
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 8
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
ioapic0: intpin 24 -> PCI IRQ 24 (level, low)
ioapic0: intpin 25 -> PCI IRQ 25 (level, low)
ioapic0: intpin 26 -> PCI IRQ 26 (level, low)
ioapic0: intpin 27 -> PCI IRQ 27 (level, low)
ioapic0: intpin 28 -> PCI IRQ 28 (level, low)
ioapic0: intpin 29 -> PCI IRQ 29 (level, low)
ioapic0: intpin 30 -> PCI IRQ 30 (level, low)
ioapic0: intpin 31 -> PCI IRQ 31 (level, low)
ioapic0: intpin 32 -> PCI IRQ 32 (level, low)
ioapic0: intpin 33 -> PCI IRQ 33 (level, low)
ioapic0: intpin 34 -> PCI IRQ 34 (level, low)
lapic: Routing NMI -> LINT1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-34 on motherboard
cpu0 BSP:
ID: 0x03000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x000100f0 pcm: 0x00010000
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ MICRO> on motherboard
acpi0: [MPSAFE]
acpi0: Power Button (fixed)
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: bus 0 dev 0 func 0
unknown: I/O range not supported
AcpiOsDerivePciId: bus 0 dev 0 func 1
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 10 11 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 10 11 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 3 N 0 5 10 11 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 5 10 11 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link8: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link8: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link8: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link9: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link9: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link9: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
ACPI timer: 0/3 1/1 0/3 0/3 0/3 0/7 0/16777185 1/1 0/16777156 0/15 -> 2
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1166, dev=0x0009, revid=0x06
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0009, revid=0x06
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1000, dev=0x0010, revid=0x02
bus=0, slot=1, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xc0 (5760 ns), mingnt=0x1e (7500 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00002000, size 8, enabled
map[14]: type 1, range 32, base c5000000, size 24, enabled
map[18]: type 1, range 32, base c4000000, size 24, enabled
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4756, revid=0x7a
bus=0, slot=3, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
map[10]: type 3, range 32, base c2000000, size 24, enabled
map[14]: type 4, range 32, base 00002400, size 8, enabled
map[18]: type 1, range 32, base c3fff000, size 12, enabled
found-> vendor=0x0e11, dev=0xa0f0, revid=0x00
bus=0, slot=4, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0143, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 00001800, size 8, enabled
map[14]: type 1, range 32, base c3ffef00, size 8, enabled
found-> vendor=0x1166, dev=0x0200, revid=0x51
bus=0, slot=15, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[90]: type 4, range 32, base 00000000, size 4, enabled
found-> vendor=0x1166, dev=0x0211, revid=0x00
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=1
cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00002800, size 4, enabled
ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem 0xc5000000-0xc5ffffff,0xc4000000-0xc4ffffff irq 19 at device 1.0 on pci0
ida0: Reserved 0x1000000 bytes for rid 0x14 type 3 at 0xc5000000
ida0: [GIANT-LOCKED]
ida0: drives=1 firm_rev=1.50
idad0: <Compaq Logical Drive> on ida0
idad0: 34727MB (71122560 sectors), blocksize=512
pci0: <display, VGA> at device 3.0 (no driver attached)
pci0: <base peripheral> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2800-0x280f at device 15.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2800
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=60 ostat1=70
ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 stat0=20 stat1=30 devices=0x0
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x01 err=0x04 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pcib1: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib1
pci3: physical bus=3
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=3, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c6fff000, size 12, enabled
map[14]: type 4, range 32, base 00003000, size 6, enabled
map[18]: type 1, range 32, base c6e00000, size 20, enabled
pcib1: matched entry for 3.4.INTA
pcib1: slot 4 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=3, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c6dff000, size 12, enabled
map[14]: type 4, range 32, base 00003040, size 6, enabled
map[18]: type 1, range 32, base c6c00000, size 20, enabled
pcib1: matched entry for 3.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 24
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x3000-0x303f mem 0xc6fff000-0xc6ffffff,0xc6e00000-0xc6efffff irq 17 at device 4.0 on pci3
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc6fff000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 0e11 b134 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:02:a5:e8:a9:62
fxp0: [MPSAFE]
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x3040-0x307f mem 0xc6dff000-0xc6dfffff,0xc6c00000-0xc6cfffff irq 24 at device 5.0 on pci3
fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc6dff000
fxp1: using memory space register mapping
fxp1: PCI IDs: 8086 1229 0e11 b134 0008
fxp1: Dynamic Standby mode is disabled
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: bpf attached
fxp1: Ethernet address: 00:02:a5:e8:a9:61
fxp1: [MPSAFE]
acpi_tz0: <Thermal Zone> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: failed to reset the aux device.
fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x8001 0x8011 0x8001 0x8001
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: Failed Intstat Reg Test
unknown: status reg test failed ff
Jan 7 15:01:56 happy last message repeated 2 times
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xee000-0xeffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x8001 0x8001 0x8001 0x8001
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 66456460 hz
Timecounter "TSC" frequency 996849346 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
GEOM: new disk idad0
ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on ServerWorks ROSB4 chip
acd0: <CD-224E/9.0C> CDROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 512KB buffer, PIO4
acd0: Reads: CDR, CDDA stream
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x00000000 VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 24 (PCI IRQ 24) to cluster 0
Trying to mount root from ufs:/dev/idad0s1a
start_init: trying /sbin/init
Jan 7 15:01:56 happy savecore: no dumps found
Jan 7 15:01:56 happy named[453]: starting BIND 9.3.1 -u bind -t /var/named
Jan 7 15:01:56 happy named[453]: command channel listening on 127.0.0.1#953
Jan 7 15:01:56 happy named[453]: command channel listening on ::1#953
Jan 7 15:01:56 happy named[453]: zone 0.0.127.IN-ADDR.ARPA/IN: loading master file master/localhost.rev: file not found
Jan 7 15:01:56 happy named[453]: zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA/IN: loading master file master/localhost-v6.rev: file not found
Jan 7 15:01:57 happy named[453]: running
Accounting enabled
Linux ELF exec handler installed
-------------- next part --------------
happy# sysctl hw.acpi
hw.acpi.supported_sleep_state: S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S4
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.reset_video: 1
hw.acpi.cpu.cx_supported: C1/0
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00%
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.tz0.temperature: 8.3C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 9.8C
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 31.3C
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
More information about the freebsd-acpi
mailing list