ACPI Problem With Toshiba Tecra A4

[Yousef Raffah]

On Tue, 2005-10-04 at 09:28 -0400, John Baldwin wrote:

> > > Now if I enable
> > > acpi_load="YES"
> > > in /boot/loader.conf, I can't boot my FreeBSD as the hard disk ad0
> > > doesn't get recognized during boot and the system stops asking me to
> > > select the root partition! Which is not available of course.
> > >
> >
> > This part is probably the issue:
> > > atapci0: <Intel ICH6 SATA150 controller> port
> > > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1100-0x110f at device 31.2 on pci0
> > > atapci0: failed to enable memory mapping!
> >
> > Try booting with:
> > debug.acpi.disabled="sysres"
> 
> I don't think that will help as this dmesg is with ACPI disabled (it has pir0 
> which only attaches to legacy(4)).  We would need to see the dmesg with ACPI 
> enabled as a first step probably.  Yousef, if you can setup a serial console 
> that is probably the best way to capture a verbose dmesg with ACPI enabled.
> 
I'm sorry but I can't seem to get dcons running fine over firewire :( I
managed to get dconschat fine though but I don't think it is useful as I
got it running on localhost only! Can anyone help with dcons properly?
Sorry if this is of topic
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-acpi/attachments/20051022/1541d5b0/attachment.bin