ACPI errors on amd64 (sempron)
Moore, Robert
robert.moore at intel.com
Thu Oct 20 13:32:09 PDT 2005
I think that the generation of the OS for Amd64 needs to set this
define:
#define ACPI_MISALIGNED_TRANSFERS
I will look into doing this automatically in the actypes.h header
> -----Original Message-----
> From: owner-freebsd-acpi at freebsd.org [mailto:owner-freebsd-
> acpi at freebsd.org] On Behalf Of Mathieu Prevot
> Sent: Thursday, October 20, 2005 1:16 PM
> To: freebsd-acpi at freebsd.org
> Subject: ACPI errors on amd64 (sempron)
>
> Sorry. More information here:
>
> GENERIC kernel amd64 6.0RC1
>
> 1) dmesg after boot -v
> 2) sysctl hw.acpi
> 3) acpidump -t -d in the file
>
>
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-RC1 #0: Sun Oct 9 20:36:12 UTC 2005
> root at rat.samsco.home:/usr/obj/usr/src/sys/GENERIC
> Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff809a3000.
> Preloaded elf obj module "/boot/kernel/snd_via8233.ko" at
> 0xffffffff809a31d0.
> Preloaded elf obj module "/boot/kernel/sound.ko" at
0xffffffff809a3700.
> Calibrating clock(s) ... i8254 clock: 1193116 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Calibrating TSC clock ... TSC clock: 1607400689 Hz
> CPU: AMD Sempron(tm) Processor 2600+ (1607.40-MHz K8-class CPU)
> Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = 2
>
>
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
> MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
> Features2=0x1<SSE3>
> AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
> L1 2MB data TLB: 8 entries, fully associative
> L1 2MB instruction TLB: 8 entries, fully associative
> L1 4KB data TLB: 32 entries, fully associative
> L1 4KB instruction TLB: 32 entries, fully associative
> L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
associative
> L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
> associative
> L2 2MB unified TLB: 0 entries, disabled/not present
> L2 4KB data TLB: 512 entries, 4-way associative
> L2 4KB instruction TLB: 512 entries, 4-way associative
> L2 unified cache: 128 kbytes, 64 bytes/line, 1 lines/tag, 16-way
> associative
> real memory = 469696512 (447 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
> 0x0000000000aa0000 - 0x000000001b28ffff, 444530688 bytes (108528
pages)
> avail memory = 441655296 (421 MB)
> ACPI APIC Table: <VIAK8 AWRDACPI>
> APIC: CPU 0 has ACPI ID 0
> MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
> ioapic0: Routing external 8259A's -> intpin 0
> ioapic0: intpin 0 -> ExtINT (edge, high)
> ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
> ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
> ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
> ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
> ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
> ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
> ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
> ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
> ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
> ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
> ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
> ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
> ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
> ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
> ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
> ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
> ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
> ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
> ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
> ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
> ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
> ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
> ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
> MADT: Interrupt override: source 0, irq 2
> ioapic0: Routing IRQ 0 -> intpin 2
> ioapic0: intpin 2 trigger: edge
> ioapic0: intpin 2 polarity: high
> MADT: Interrupt override: source 9, irq 9
> ioapic0: intpin 9 trigger: level
> ioapic0: intpin 9 polarity: low
> lapic0: Routing NMI -> LINT1
> ioapic0 <Version 0.3> irqs 0-23 on motherboard
> cpu0 BSP:
> ID: 0x00000000 VER: 0x00050010 LDR: 0x01000000 DFR: 0x0fffffff
> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
> wlan: <802.11 Link Layer>
> null: <null device, zero device>
> random: <entropy source, Software, Yarrow>
> nfslock: pseudo-device
> mem: <memory>
> io: <I/O>
> acpi0: <VIAK8 AWRDACPI> on motherboard
> acpi0: [MPSAFE]
> pci_open(1): mode 1 addr port (0x0cf8) is 0x80008840
> pci_open(1a): mode1res=0x80000000 (0x80000000)
> pci_cfgcheck: device 0 [class=060000] [hdr=80] is there
(id=02041106)
> AcpiOsDerivePciId: bus 0 dev 17 func 1
> AcpiOsDerivePciId: bus 0 dev 15 func 1
> AcpiOsDerivePciId: bus 0 dev 15 func 0
> AcpiOsDerivePciId: bus 0 dev 17 func 0
> acpi0: Power Button (fixed)
> ACPI-0501: *** Error: Handler for [SystemMemory] returned
> AE_AML_ALIGNMENT
> ACPI-1304: *** Error: Method execution failed [\\_SB_.MEM_._CRS]
> (Node 0xffffff0000091840), AE_AML_ALIGNMENT
> ACPI-0239: *** Error: Method execution failed [\\_SB_.MEM_._CRS]
> (Node 0xffffff0000091840), AE_AML_ALIGNMENT
> can't fetch resources for \\_SB_.MEM_ - AE_AML_ALIGNMENT
> ACPI-0501: *** Error: Handler for [SystemMemory] returned
> AE_AML_ALIGNMENT
> ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0._CRS]
> (Node 0xffffff0000091540), AE_AML_ALIGNMENT
> ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0._CRS]
> (Node 0xffffff0000091540), AE_AML_ALIGNMENT
> can't fetch resources for \\_SB_.PCI0 - AE_AML_ALIGNMENT
> pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
> pci_link0: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 11 N 0 3 4 6 7 10 11 12
> pci_link0: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 11 N 0 3 4 6 7 10 11 12
> pci_link0: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link1: <ACPI PCI Link LNKB> irq 5 on acpi0
> pci_link1: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 5 N 0 3 4 6 7 10 11 12
> pci_link1: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link1: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
> pci_link2: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 10 N 0 3 4 6 7 10 11 12
> pci_link2: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 10 N 0 3 4 6 7 10 11 12
> pci_link2: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link3: <ACPI PCI Link LNKD> on acpi0
> pci_link3: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link3: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link3: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link4: <ACPI PCI Link LNKE> on acpi0
> pci_link4: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link4: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link4: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link5: <ACPI PCI Link LNKF> on acpi0
> pci_link5: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link5: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link5: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link6: <ACPI PCI Link LNK0> on acpi0
> pci_link6: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link6: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link6: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link7: <ACPI PCI Link LNK1> on acpi0
> pci_link7: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link7: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link7: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 3 4 6 7 10 11 12
> pci_link8: <ACPI PCI Link ALKA> irq 0 on acpi0
> pci_link8: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 20
> pci_link8: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 20
> pci_link8: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 20
> pci_link9: <ACPI PCI Link ALKB> irq 0 on acpi0
> pci_link9: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 21
> pci_link9: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 21
> pci_link9: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 21
> pci_link10: <ACPI PCI Link ALKC> irq 0 on acpi0
> pci_link10: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 22
> pci_link10: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 22
> pci_link10: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 22
> pci_link11: <ACPI PCI Link ALKD> irq 0 on acpi0
> pci_link11: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 23
> pci_link11: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 23
> pci_link11: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 23
> ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> on acpi0
> ACPI: Found matching pin for 0.16.INTA at func 0: 11
> pci_link9: BIOS IRQ 11 for -2145774744.16.INTA is invalid
> ACPI: Found matching pin for 0.16.INTB at func 2: 5
> pci_link9: BIOS IRQ 5 for -2145774744.16.INTB is invalid
> ACPI: Found matching pin for 0.16.INTC at func 4: 10
> pci_link9: BIOS IRQ 10 for -2145774744.16.INTC is invalid
> ACPI: Found matching pin for 0.17.INTC at func 5: 10
> pci_link10: BIOS IRQ 10 for -2145774744.17.INTC is invalid
> ACPI: Found matching pin for 0.18.INTA at func 0: 11
> pci_link11: BIOS IRQ 11 for -2145774744.18.INTA is invalid
> ACPI: Found matching pin for 0.15.INTA at func 0: 255
> pci0: <ACPI PCI bus> on pcib0
> pci0: physical bus=0
> found-> vendor=0x1106, dev=0x0204, revid=0x00
> bus=0, slot=0, func=0
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
> lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> powerspec 2 supports D0 D3 current D0
> map[10]: type 3, range 32, base e0000000, size 26, enabled
> found-> vendor=0x1106, dev=0x1204, revid=0x00
> bus=0, slot=0, func=1
> class=06-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1106, dev=0x2204, revid=0x00
> bus=0, slot=0, func=2
> class=06-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1106, dev=0x3204, revid=0x00
> bus=0, slot=0, func=3
> class=06-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1106, dev=0x4204, revid=0x00
> bus=0, slot=0, func=4
> class=06-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1106, dev=0x7204, revid=0x00
> bus=0, slot=0, func=7
> class=06-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1106, dev=0xb188, revid=0x00
> bus=0, slot=1, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1106, dev=0x0571, revid=0x06
> bus=0, slot=15, func=0
> class=01-01-8a, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
> lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=255
> powerspec 2 supports D0 D3 current D0
> map[20]: type 4, range 32, base 0000d000, size 4, enabled
> found-> vendor=0x1106, dev=0x3038, revid=0x81
> bus=0, slot=16, func=0
> class=0c-03-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
> lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[20]: type 4, range 32, base 0000d400, size 5, enabled
> pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.ALKB:0)
> pci_link9: Picked IRQ 21 with weight 0
> pcib0: slot 16 INTA routed to irq 21 via \\_SB_.PCI0.ALKB
> found-> vendor=0x1106, dev=0x3038, revid=0x81
> bus=0, slot=16, func=1
> class=0c-03-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
> lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[20]: type 4, range 32, base 0000d800, size 5, enabled
> pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.ALKB:0)
> pcib0: slot 16 INTA routed to irq 21 via \\_SB_.PCI0.ALKB
> found-> vendor=0x1106, dev=0x3038, revid=0x81
> bus=0, slot=16, func=2
> class=0c-03-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
> lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=5
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[20]: type 4, range 32, base 0000dc00, size 5, enabled
> pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.ALKB:0)
> pcib0: slot 16 INTB routed to irq 21 via \\_SB_.PCI0.ALKB
> found-> vendor=0x1106, dev=0x3038, revid=0x81
> bus=0, slot=16, func=3
> class=0c-03-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
> lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=5
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[20]: type 4, range 32, base 0000e000, size 5, enabled
> pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.ALKB:0)
> pcib0: slot 16 INTB routed to irq 21 via \\_SB_.PCI0.ALKB
> found-> vendor=0x1106, dev=0x3104, revid=0x86
> bus=0, slot=16, func=4
> class=0c-03-20, hdrtype=0x00, mfdev=1
> cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
> lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=c, irq=10
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 1, range 32, base ea000000, size 8, enabled
> pcib0: matched entry for 0.16.INTC (src \\_SB_.PCI0.ALKB:0)
> pcib0: slot 16 INTC routed to irq 21 via \\_SB_.PCI0.ALKB
> found-> vendor=0x1106, dev=0x3227, revid=0x00
> bus=0, slot=17, func=0
> class=06-01-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> powerspec 2 supports D0 D3 current D0
> found-> vendor=0x1106, dev=0x3059, revid=0x60
> bus=0, slot=17, func=5
> class=04-01-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=c, irq=10
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 4, range 32, base 0000e400, size 8, enabled
> pcib0: matched entry for 0.17.INTC (src \\_SB_.PCI0.ALKC:0)
> pci_link10: Picked IRQ 22 with weight 0
> pcib0: slot 17 INTC routed to irq 22 via \\_SB_.PCI0.ALKC
> found-> vendor=0x1106, dev=0x3065, revid=0x78
> bus=0, slot=18, func=0
> class=02-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0087, statreg=0x0210, cachelnsz=8 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000
> ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 4, range 32, base 0000e800, size 8, enabled
> map[14]: type 1, range 32, base ea001000, size 8, enabled
> pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.ALKD:0)
> pci_link11: Picked IRQ 23 with weight 0
> pcib0: slot 18 INTA routed to irq 23 via \\_SB_.PCI0.ALKD
> found-> vendor=0x1022, dev=0x1100, revid=0x00
> bus=0, slot=24, func=0
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1101, revid=0x00
> bus=0, slot=24, func=1
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1102, revid=0x00
> bus=0, slot=24, func=2
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1022, dev=0x1103, revid=0x00
> bus=0, slot=24, func=3
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> agp0: <VIA 8380 host to PCI bridge> mem 0xe0000000-0xe3ffffff at
> device 0.0 on pci0
> AMD64: 1 Misc. Control unit(s) found.
> agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000
> agp0: allocating GATT for aperture of size 64M
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pcib1: secondary bus 1
> pcib1: subordinate bus 1
> pcib1: I/O decode 0xf000-0xfff
> pcib1: memory decode 0xe8000000-0xe9ffffff
> pcib1: prefetched decode 0xe4000000-0xe7ffffff
> pci1: <PCI bus> on pcib1
> pci1: physical bus=1
> found-> vendor=0x1106, dev=0x3108, revid=0x01
> bus=1, slot=0, func=0
> class=03-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
> lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 3, range 32, base e4000000, size 26, enabled
> pcib1: (null) requested memory range 0xe4000000-0xe7ffffff: good
> map[14]: type 1, range 32, base e8000000, size 24, enabled
> pcib1: (null) requested memory range 0xe8000000-0xe8ffffff: good
> pcib0: matched entry for 0.1.INTA
> pcib0: slot 1 INTA hardwired to IRQ 16
> pcib1: slot 0 INTA is routed to irq 16
> pci1: <display, VGA> at device 0.0 (no driver attached)
> atapci0: <VIA 8237 UDMA133 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 15.0 on
pci0
> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd000
> ata0: <ATA channel 0> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
> ata0: reset tp1 mask=03 ostat0=50 ostat1=00
> ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
> ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
> ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
> ata0: [MPSAFE]
> ata1: <ATA channel 1> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
> ata1: reset tp1 mask=03 ostat0=50 ostat1=50
> ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata1: reset tp2 stat0=00 stat1=00
devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
> ata1: [MPSAFE]
> uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at
> device 16.0 on pci0
> uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400
> uhci0: [GIANT-LOCKED]
> usb0: <VIA 83C572 USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at
> device 16.1 on pci0
> uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800
> uhci1: [GIANT-LOCKED]
> usb1: <VIA 83C572 USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at
> device 16.2 on pci0
> uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc00
> uhci2: [GIANT-LOCKED]
> usb2: <VIA 83C572 USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at
> device 16.3 on pci0
> uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe000
> uhci3: [GIANT-LOCKED]
> usb3: <VIA 83C572 USB controller> on uhci3
> usb3: USB revision 1.0
> uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <VIA VT6202 USB 2.0 controller> mem 0xea000000-0xea0000ff irq
> 21 at device 16.4 on pci0
> ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xea000000
> ehci0: [GIANT-LOCKED]
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <VIA VT6202 USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> isab0: <PCI-ISA bridge> at device 17.0 on pci0
> isa0: <ISA bus> on isab0
> pcm0: <VIA VT8237> port 0xe400-0xe4ff irq 22 at device 17.5 on pci0
> pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe400
> pcm0: [GIANT-LOCKED]
> pcm0: <Avance Logic ALC655 AC97 Codec (id = 0x414c4760)>
> pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement
> pcm0: Primary codec extended features reserved 1, center DAC,
> surround DAC, LFE DAC, reserved 5
> pcm0: sndbuf_setmap 1a940000, 1000; 0xffffff001a940000 -> 1a940000
> pcm0: sndbuf_setmap 1a47e000, 1000; 0xffffff001a47e000 -> 1a47e000
> pcm0: sndbuf_setmap 199fc000, 1000; 0xffffff00199fc000 -> 199fc000
> pcm0: sndbuf_setmap 19d7a000, 1000; 0xffffff0019d7a000 -> 19d7a000
> pcm0: sndbuf_setmap 19917000, 1000; 0xffffff0019917000 -> 19917000
> pcm0: sndbuf_setmap 19718000, 1000; 0xffffff0019718000 -> 19718000
> vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem
> 0xea001000-0xea0010ff irq 23 at device 18.0 on pci0
> vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
> miibus0: <MII bus> on vr0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0: OUI 0x004063, model 0x0032, rev. 10
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> vr0: bpf attached
> vr0: Ethernet address: 00:14:85:51:39:80
> vr0: [MPSAFE]
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
> atkbd0: [GIANT-LOCKED]
> psm0: unable to allocate IRQ
> ex_isa_identify()
> atkbdc: atkbdc0 already exists; skipping it
> pnp_identify: Trying Read_Port at 203
> pnp_identify: Trying Read_Port at 243
> pnp_identify: Trying Read_Port at 283
> pnp_identify: Trying Read_Port at 2c3
> pnp_identify: Trying Read_Port at 303
> pnp_identify: Trying Read_Port at 343
> pnp_identify: Trying Read_Port at 383
> pnp_identify: Trying Read_Port at 3c3
> PNP Identify complete
> ahc_isa_probe 13: ioport 0xdc00 alloc failed
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> orm0: <ISA Option ROM> at iomem 0xcc000-0xd3fff on isa0
> fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> ppc0: cannot reserve I/O port range
> ppc0: <Parallel port> failed to probe at irq 7 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: irq maps: 0xc021 0xc021 0xc021 0xc021
> sio0: probe failed test(s): 0 1 2 4 6 7 9
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 8250 or not responding
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: irq maps: 0xc021 0xc021 0xc021 0xc021
> sio1: probe failed test(s): 0 1 2 4 6 7 9
> sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> isa_probe_children: probing PnP devices
> ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass
> 3/1
> ums0: 3 buttons and Z dir.
> Device configuration finished.
> procfs registered
> linprocfs registered
> lapic: Divisor 2, Frequency 100462496 hz
> Timecounter "TSC" frequency 1607400689 Hz quality 800
> Timecounters tick every 1.000 msec
> Linux ELF exec handler installed
> lo0: bpf attached
> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
> ad0: setting PIO4 on VIA 8237 chip
> ad0: setting UDMA100 on VIA 8237 chip
> ad0: 152626MB <Seagate ST3160023A 3.06> at ata0-master UDMA100
> ad0: 312579695 sectors [310098C/16H/63S] 16 sectors/interrupt 1 depth
> queue
> GEOM: new disk ad0
> ad0: VIA check1 failed
> ad0: Adaptec check1 failed
> ad0: LSI (v3) check1 failed
> ad0: LSI (v2) check1 failed
> ad0: FreeBSD check1 failed
> ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
> ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
> acd0: setting PIO4 on VIA 8237 chip
> acd0: setting UDMA33 on VIA 8237 chip
> acd0: <NEC DVD RW ND-3500AG/2.16> DVDR drive at ata1 as master
> acd0: read 8268KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB
> buffer, UDMA33
> acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
> acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> acd1: setting PIO4 on VIA 8237 chip
> acd1: setting UDMA33 on VIA 8237 chip
> acd1: <PLEXTOR CD-R PX-W5224A/1.03> CDRW drive at ata1 as slave
> acd1: read 6890KB/s (6890KB/s) write 8958KB/s (8958KB/s), 2048KB
> buffer, UDMA33
> acd1: Reads: CDR, CDRW, CDDA stream, packet
> acd1: Writes: CDR, CDRW, test write, burnproof
> acd1: Audio: play, 256 volume levels
> acd1: Mechanism: ejectable tray, unlocked
> acd1: Medium: CD-ROM unknown
> ATA PseudoRAID loaded
> ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
> ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
> ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
> ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
> ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
> ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
> ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
> ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
> Trying to mount root from ufs:/dev/ad0s1a
> start_init: trying /sbin/init
>
>
> hw.acpi.supported_sleep_state: S1 S4 S5
> hw.acpi.power_button_state: S5
> hw.acpi.sleep_button_state: S1
> hw.acpi.lid_switch_state: NONE
> hw.acpi.standby_state: S1
> hw.acpi.suspend_state: S3
> hw.acpi.sleep_delay: 1
> hw.acpi.s4bios: 0
> hw.acpi.verbose: 0
> hw.acpi.cpu.cx_supported: C1/0
> hw.acpi.cpu.cx_lowest: C1
> hw.acpi.cpu.cx_usage: 100.00%
>
More information about the freebsd-acpi
mailing list