ASUS V6V - S1,S3,S4 unclean crash
Laganakos Vassilis
elfshadow at pythagoras.physics.upatras.gr
Fri Oct 7 15:43:28 PDT 2005
Hello,
I recently bought an V6V (V6800) Asus notebook. I installed FreeBSD 6.0
BETA 4 ( I cvsup'ed to the latest sources and performed a make
builworld) and I have the following problem with acpi support. During boot
time I load nothing but the acpi.ko, linux.ko and rain_saver.ko modules.
Omitting the latter two modules doesn't change anything. I use the GENERIC
kernel that comes with BETA 4 release, recompiled after the make
buildworld.
When I do a :
acpiconf -s 1
(or after loading the acpi_asus.ko module press the suspend to memory key)
the notebook apears to be suspended, and the only thing that is typed is :
fwohci0: fwohc_pci_suspend
If I press any key, the notebook resumes and crashes uncleanly and to fast
to see the error messages that are printed. Almost the same happen with
states S3 (in this case the screen does not turn off) and S4. Shutting
down through S5 works fine though.
I read in the freebsd lists that another owner of this notebook had the
same problems (http://lists.freebsd.org/pipermail/freebsd-acpi/2005-May/001516.html)
but I think it's not fixed yet.
I have attached the dmesg output after a boot -v, the output from sysctl
hw.acpi, before and after loading the asus_acpi module, and the
compilation errors from the iasl root-ASUS-V6V.asl . The URL where a copy
of my ASL an be found temporeraly is:
www.physics.upatras.gr/~laganakos/temp/root-ASUS-V6V.asl
I wish I could help so that this problem is fixed and all the Fuction
buttons are supported in FreeBSD 6.0 release, but I am currently under
great pressure. Some guidelines could be anyway helpfull. (The solution
itself could be equally helpfull :) )
Kind regards,
Vassilis Laganakos
-------------- next part --------------
Intel ACPI Component Architecture
ASL Optimizing Compiler / AML Disassembler version 20041119 [Oct 7 2005]
Copyright (C) 2000 - 2004 Intel Corporation
Supports ACPI Specification Revision 2.0c
my_asl.asl 301: LNKA,
Error 1022 - ^ Object does not exist (LNKA)
my_asl.asl 309: LNKB,
Error 1022 - ^ Object does not exist (LNKB)
my_asl.asl 317: LNKC,
Error 1022 - ^ Object does not exist (LNKC)
my_asl.asl 325: LNKD,
Error 1022 - ^ Object does not exist (LNKD)
my_asl.asl 333: LNKB,
Error 1022 - ^ Object does not exist (LNKB)
my_asl.asl 341: LNKA,
Error 1022 - ^ Object does not exist (LNKA)
my_asl.asl 349: LNKB,
Error 1022 - ^ Object does not exist (LNKB)
my_asl.asl 357: LNKC,
Error 1022 - ^ Object does not exist (LNKC)
my_asl.asl 365: LNKD,
Error 1022 - ^ Object does not exist (LNKD)
my_asl.asl 373: LNKC,
Error 1022 - ^ Object does not exist (LNKC)
my_asl.asl 381: LNKD,
Error 1022 - ^ Object does not exist (LNKD)
my_asl.asl 389: LNKB,
Error 1022 - ^ Object does not exist (LNKB)
my_asl.asl 397: LNKE,
Error 1022 - ^ Object does not exist (LNKE)
my_asl.asl 405: LNKA,
Error 1022 - ^ Object does not exist (LNKA)
my_asl.asl 413: LNKA,
Error 1022 - ^ Object does not exist (LNKA)
my_asl.asl 421: LNKH,
Error 1022 - ^ Object does not exist (LNKH)
my_asl.asl 429: LNKD,
Error 1022 - ^ Object does not exist (LNKD)
my_asl.asl 437: LNKC,
Error 1022 - ^ Object does not exist (LNKC)
my_asl.asl 445: LNKA,
Error 1022 - ^ Object does not exist (LNKA)
my_asl.asl 609: LNKA,
Error 1022 - ^ Object does not exist (LNKA)
my_asl.asl 617: LNKB,
Error 1022 - ^ Object does not exist (LNKB)
my_asl.asl 625: LNKC,
Error 1022 - ^ Object does not exist (LNKC)
my_asl.asl 633: LNKD,
Error 1022 - ^ Object does not exist (LNKD)
my_asl.asl 677: LNKE,
Error 1022 - ^ Object does not exist (LNKE)
my_asl.asl 685: LNKC,
Error 1022 - ^ Object does not exist (LNKC)
my_asl.asl 693: LNKB,
Error 1022 - ^ Object does not exist (LNKB)
my_asl.asl 701: LNKA,
Error 1022 - ^ Object does not exist (LNKA)
my_asl.asl 709: LNKC,
Error 1022 - ^ Object does not exist (LNKC)
my_asl.asl 717: LNKC,
Error 1022 - ^ Object does not exist (LNKC)
my_asl.asl 725: LNKB,
Error 1022 - ^ Object does not exist (LNKB)
my_asl.asl 733: LNKD,
Error 1022 - ^ Object does not exist (LNKD)
my_asl.asl 2459: Store (\_SB.PCI0.IDE0.PAMD, Local0)
Error 1022 - Object does not exist ^ (\_SB.PCI0.IDE0.PAMD)
my_asl.asl 2466: Store (\_SB.PCI0.IDE1.SAMD, Local0)
Error 1022 - Object does not exist ^ (\_SB.PCI0.IDE1.SAMD)
my_asl.asl 4694: If (LNot (And (\_SB.PCI0.HFZF, Local2)))
Error 1022 - Object does not exist ^ (\_SB.PCI0.HFZF)
my_asl.asl 4698: Or (\_SB.PCI0.HFZF, Local2, \_SB.PCI0.HFZF)
Error 1022 - Object does not exist ^ (\_SB.PCI0.HFZF)
my_asl.asl 4698: Or (\_SB.PCI0.HFZF, Local2, \_SB.PCI0.HFZF)
Error 1022 - Object does not exist ^ (\_SB.PCI0.HFZF)
my_asl.asl 4852: Return (While (Local1)
Error 1037 - syntax error ^
my_asl.asl 4866: })
Error 1037 - syntax error ^
ASL Input: my_asl.asl - 6081 lines, 183578 bytes, 2064 keywords
Compilation complete. 38 Errors, 0 Warnings, 0 Remarks, 466 Optimizations
-------------- next part --------------
hw.acpi.supported_sleep_state: S1 S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.reset_video: 1
hw.acpi.cpu.cx_supported: C1/1 C2/1 C3/90 C4/190
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00% 0.00% 0.00% 0.00%
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.tz0.temperature: 53.0C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: -1
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 127.0C
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.battery.life: 93
hw.acpi.battery.time: 135
hw.acpi.battery.state: 1
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
hw.acpi.acline: 0
hw.acpi.asus.lcd_backlight: 1
hw.acpi.asus.lcd_brightness: 9
hw.acpi.asus.video_output: 257
-------------- next part --------------
hw.acpi.supported_sleep_state: S1 S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.reset_video: 1
hw.acpi.cpu.cx_supported: C1/1 C2/1 C3/90 C4/190
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00% 0.00% 0.00% 0.00%
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.tz0.temperature: 51.0C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: -1
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 127.0C
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.battery.life: 96
hw.acpi.battery.time: 144
hw.acpi.battery.state: 1
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
hw.acpi.acline: 0
-------------- next part --------------
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25908086)
pcibios: BIOS version 2.10
Found $PIR table, 12 entries at 0xc00f8390
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 6 7 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 30 A 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 30 B 0x68 3 4 5 6 7 10 11 12 14 15
embedded 0 28 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 28 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 28 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 28 D 0x63 3 4 5 6 7 10 11 12 14 15
embedded 3 8 A 0x68 3 4 5 6 7 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 31 B 0x63 3 4 5 6 7 10 11 12 14 15
embedded 0 27 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 29 A 0x6b 3 4 5 6 7 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 6 7 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 29 D 0x60 3 4 5 6 7 10 11 12 14 15
embedded 3 0 A 0x62 3 4 5 6 7 10 11 12 14 15
embedded 3 1 A 0x61 3 4 5 6 7 10 11 12 14 15
embedded 3 1 B 0x60 3 4 5 6 7 10 11 12 14 15
embedded 3 1 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 3 1 D 0x62 3 4 5 6 7 10 11 12 14 15
embedded 3 2 A 0x61 3 4 5 6 7 10 11 12 14 15
embedded 3 2 B 0x63 3 4 5 6 7 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 1 0 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 1 0 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 1 0 D 0x63 3 4 5 6 7 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 3 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 2
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_ec0: info: new max delay is 30 us
acpi_ec0: info: new max delay is 120 us
acpi_ec0: info: new max delay is 240 us
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: <ACPI PCI Link LNKD> irq 7 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: <ACPI PCI Link LNKE> irq 6 on acpi0
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 6 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 6 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
acpi0: reservation of 62, 2 (4) failed
acpi0: reservation of 65, b (4) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x810
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2590, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2591, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=4 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2660, revid=0x04
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=4 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2658, revid=0x04
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 00009800, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2659, revid=0x04
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=7
map[20]: type 4, range 32, base 0000a000, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x265a, revid=0x04
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
map[20]: type 4, range 32, base 0000a400, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x265b, revid=0x04
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
map[20]: type 4, range 32, base 0000a800, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x265c, revid=0x04
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base dffffc00, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2448, revid=0xd4
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x266e, revid=0x04
bus=0, slot=30, func=2
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00008800, size 8, enabled
map[14]: type 4, range 32, base 00008400, size 6, enabled
map[18]: type 1, range 32, base dffff800, size 9, enabled
map[1c]: type 1, range 32, base dffff400, size 8, enabled
pcib0: matched entry for 0.30.INTA
pcib0: slot 30 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x266d, revid=0x04
bus=0, slot=30, func=3
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=6
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00009400, size 8, enabled
map[14]: type 4, range 32, base 00009000, size 7, enabled
pcib0: matched entry for 0.30.INTB
pcib0: slot 30 INTB hardwired to IRQ 20
found-> vendor=0x8086, dev=0x2641, revid=0x04
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x266f, revid=0x04
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x8086, dev=0x266a, revid=0x04
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
map[20]: type 4, range 32, base 00000400, size 5, enabled
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xb000-0xbfff
pcib1: memory decode 0xf0000000-0xfbefffff
pcib1: prefetched decode 0xd0000000-0xdeffffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x3150, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=4 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 3, range 32, base d0000000, size 27, enabled
pcib1: (null) requested memory range 0xd0000000-0xd7ffffff: good
map[14]: type 4, range 32, base 0000b000, size 8, enabled
pcib1: (null) requested I/O range 0xb000-0xb0ff: in range
map[18]: type 1, range 32, base f0000000, size 16, enabled
pcib1: (null) requested memory range 0xf0000000-0xf000ffff: good
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xc000-0xcfff
pcib2: memory decode 0xfff00000-0xfffff
pcib2: prefetched decode 0xfff00000-0xfffff
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P4 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x9800-0x981f irq 23 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x9800
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xa000-0xa01f irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa000
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xa400-0xa41f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa400
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xa800-0xa81f irq 16 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa800
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdffffc00-0xdfffffff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xdffffc00
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 4
pcib3: I/O decode 0xd000-0xefff
pcib3: memory decode 0xfbf00000-0xfbffffff
pcib3: prefetched decode 0xfff00000-0xfffff
pcib3: Subtractively decoded bridge.
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
found-> vendor=0x11ab, dev=0x4320, revid=0x13
bus=3, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x02b0, cachelnsz=4 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fbffc000, size 14, enabled
pcib3: (null) requested memory range 0xfbffc000-0xfbffffff: good
map[14]: type 4, range 32, base 0000d800, size 8, enabled
pcib3: (null) requested I/O range 0xd800-0xd8ff: in range
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 18
found-> vendor=0x1180, dev=0x0476, revid=0xb3
bus=3, slot=1, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, enabled
found-> vendor=0x1180, dev=0x0552, revid=0x08
bus=3, slot=1, func=1
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fbffa800, size 11, enabled
pcib3: (null) requested memory range 0xfbffa800-0xfbffafff: good
pcib3: matched entry for 3.1.INTB
pcib3: slot 1 INTB hardwired to IRQ 16
found-> vendor=0x1180, dev=0x0822, revid=0x17
bus=3, slot=1, func=2
class=08-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fbffb400, size 8, enabled
pcib3: (null) requested memory range 0xfbffb400-0xfbffb4ff: good
pcib3: matched entry for 3.1.INTC
pcib3: slot 1 INTC hardwired to IRQ 18
found-> vendor=0x1180, dev=0x0592, revid=0x08
bus=3, slot=1, func=3
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fbffb800, size 8, enabled
pcib3: (null) requested memory range 0xfbffb800-0xfbffb8ff: good
pcib3: matched entry for 3.1.INTC
pcib3: slot 1 INTC hardwired to IRQ 18
found-> vendor=0x1180, dev=0x0852, revid=0x03
bus=3, slot=1, func=4
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fbffbc00, size 8, enabled
pcib3: (null) requested memory range 0xfbffbc00-0xfbffbcff: good
pcib3: matched entry for 3.1.INTC
pcib3: slot 1 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x4223, revid=0x05
bus=3, slot=2, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fbff9000, size 12, enabled
pcib3: (null) requested memory range 0xfbff9000-0xfbff9fff: good
pcib3: matched entry for 3.2.INTA
pcib3: slot 2 INTA hardwired to IRQ 17
skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfbffc000-0xfbffffff irq 18 at device 0.0 on pci3
skc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfbffc000
skc0: interrupt moderation is 100 us
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
skc0: PN: Yukon 88E8001
skc0: EC: Rev. 1.3
skc0: MN: Marvell
skc0: SN: AbCdEfG334454
skc0: chip ver = 0xb1
skc0: chip rev = 0x09
skc0: SK_EPROM0 = 0x10
skc0: SRAM size = 0x010000
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: bpf attached
sk0: Ethernet address: 00:11:d8:ea:81:34
miibus0: <
More information about the freebsd-acpi
mailing list