can't see nuthin'
KAYVEN RIESE
kayve at sfsu.edu
Tue Jul 12 03:09:58 GMT 2005
On Mon, 11 Jul 2005, KAYVEN RIESE wrote:
>
> i can't see any of my devices with freeBSD 6.0 umm..
>
> tell me what to tell you because i have no clue.
okay.. i
kayvetop# ls /dev/
acd0 consolectl lpt0.ctl ptyp6 ttyv4
acpi ctty mdctl random ttyv5
ad0 cuaa0 mem stderr ttyv6
ad0s1 cuaia0 net stdin ttyv7
ad0s1a cuala0 net1 stdout ttyv8
ad0s1c devctl net2 sysmouse ttyv9
ad0s2 devstat net3 ttyd0 ttyva
ad0s2a fd net4 ttyid0 ttyvb
ad0s2c fido network ttyld0 ttyvc
ad0s3 fw0 nfs4 ttyp0 ttyvd
ad0s3b fw0.0 null ttyp1 ttyve
ad0s3c fwmem0 pci ttyp2 ttyvf
ad0s4 fwmem0.0 ppi0 ttyp3 ums0
agpgart geom.ctl psm0 ttyp4 urandom
apm io ptyp0 ttyp5 usb
ata kbd0 ptyp1 ttyp6 usb0
atkbd0 klog ptyp2 ttyv0 usb1
bpf0 kmem ptyp3 ttyv1 usb2
bpsm0 log ptyp4 ttyv2 xpt0
console lpt0 ptyp5 ttyv3 zero
kayvetop#
here is the complete output for dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT-SNAP004 #0: Thu Jun 2 06:12:51 UTC 2005
root at wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.73GHz (600.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0x180<EST,TM2>
real memory = 536084480 (511 MB)
avail memory = 515219456 (491 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
ACPI-1304: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.EC0_.ACS_] (Node 0xc1ab3960), AE_NOT_EXIST
ACPI-1304: *** Error: Method execution failed [\\_SB_.AC__._INI] (Node
0xc1ab7840), AE_NOT_EXIST
ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
ACPI-1304: *** Error: Method execution failed
[\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc1ab3940), AE_NOT_EXIST
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] (Node
0xc1ab7c40), AE_NOT_EXIST
ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] (Node
0xc1ab7c40), AE_NOT_EXIST
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 4 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 10 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xefffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f irq
11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f irq
5 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq
10 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xffaffc00-0xffafffff irq
10 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5788 Gigabit Ethernet, ASIC rev. 0x3003> mem
0xff9f0000-0xff9fffff irq 4 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:11:d8:22:c9:91
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <RF5C476 PCI-CardBus Bridge> at device 1.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
fwohci0: <Ricoh R5C552> mem 0xff9ef800-0xff9effff irq 10 at device 1.2 on
pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:03:26:4c:e9
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:26:4c:e9
fwe0: Ethernet address: 02:e0:18:26:4c:e9
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <network> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: ACROX Resolution 400/600/800 Changeable Combo Mouse, rev 1.00/5.50,
addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 600025330 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 57231MB <HTS548060M9AT00 MGBOA53A> at ata0-master UDMA100
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._BST] (Node
0xc1ab7c60), AE_AML_NO_RETURN_VALUE
acd0: DVDR <TSSTcorpCD/DVDW TS-L532A/TC51> at ata1-master UDMA33
pccard0: No config entry could be allocated.
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad0s1a
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._BST] (Node
0xc1ab7c60), AE_AML_NO_RETURN_VALUE
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._BST] (Node
0xc1ab7c60), AE_AML_NO_RETURN_VALUE
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._BST] (Node
0xc1ab7c60), AE_AML_NO_RETURN_VALUE
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._BST] (Node
0xc1ab7c60), AE_AML_NO_RETURN_VALUE
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._BST] (Node
0xc1ab7c60), AE_AML_NO_RETURN_VALUE
ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._BST] (Node
0xc1ab7c60), AE_AML_NO_RETURN_VALUE
More information about the freebsd-acpi
mailing list