acpi_bus_number: can't get _ADR issue on Intel D923XCV Motherboard.

[John Baldwin]

On Friday 25 February 2005 06:26 am, Mateusz Jędrasik wrote:
> > Your network device just isn't supported yet:
>
> Okay sorry about the email before, i stand corrected ;) I tried stable
> from 20050224, the last 5.3 /next is 5.4-PRERELEASE/ and i recieve the
> same errors, with _ADR acpi, and also the device seems not supported.
>
> > pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
> > pci4: <ACPI PCI bus> on pcib3
> > pci4: <network, ethernet> at device 0.0 (no driver attached)
> >
> > It may be very trivial to add support for it.  Can you get the output of
> > 'pciconf -lv' for the pci4:0:0 device?  Also, do you know if this network
> > adapter is supposed to be a 10/100 adapter or a 10/100/1000 (Gigabit)?
>
> Yes, as i believe the if_sk would simply require some kind of identity
> lift? Anywho, here follows the pciconf -vl of the machine, hope that
> clears things up somehow. cheers.

none4 at pci4:0:0: class=0x020000 card=0x30638086 chip=0x436111ab rev=0x17 
hdr=0x00
    vendor   = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
    class    = network
    subclass = ethernet

so a possible patch to if_sk.c might be:

Index: if_sk.c
===================================================================
RCS file: /usr/cvs/src/sys/pci/if_sk.c,v
retrieving revision 1.96
diff -u -r1.96 if_sk.c
--- if_sk.c	29 Jan 2005 19:26:53 -0000	1.96
+++ if_sk.c	25 Feb 2005 18:47:56 -0000
@@ -157,6 +157,11 @@
 	},
 	{
 		VENDORID_MARVELL,
+		0x4361,
+		"Marvell Gigabit Ethernet"
+	},
+	{
+		VENDORID_MARVELL,
 		DEVICEID_BELKIN_5005,
 		"Belkin F5D5005 Gigabit Ethernet"
 	},


Is this device built into the motherboard or a card?  If it's a card, do you 
have a model number for it off of the box or some such?

-- 
John Baldwin <jhb at FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve"  =  http://www.FreeBSD.org