ACPI power-off failed - timeout
Sebastian Pahlke
sp.ibm at gmx.de
Sat Aug 13 13:35:35 GMT 2005
Hello,
I can't power off my FreeBSD release 5.4 box using "shutdown -p now".
Error message:
Powering system off using ACPI
ACPI power-off failed - timeout
I've a ASUS CUSI-FX mainboard with SIS630E chipset and use it with 2 IDE
HDD's, no other peripherie. By googeling I found some other posts regrding
the same problem, but no real solution. There were posts saying you should
enable APM in the kernel, but the handbook states explicitly that ACPI and
APM cannot coexist, which sounds logic to me. I tried playing with the BIOS
settings (Power Management off, PNP-OS...) and different BIOS versions
without success. What else can I do? Many thanks for your help in advance!
Here some debugging output:
# sysctl hw.acpi
-----------------
hw.acpi.supported_sleep_state: S1 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.reset_video: 1
hw.acpi.cpu.cx_supported: C1/0
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00%
Dmesg after boot -v:
----------------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Fri Aug 12 18:48:11 CEST 2005
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0791000.
Preloaded elf module "/boot/kernel/geom_mirror.ko" at 0xc0791200.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07912b0.
Calibrating clock(s) ... i8254 clock: 1193174 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 801821583 Hz
CPU: Intel Pentium III (801.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,
MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 251641856 (239 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000825000 - 0x000000000eb93fff, 238481408 bytes (58223 pages)
avail memory = 240775168 (229 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f14a0
bios32: Entry = 0xf0e80 (c00f0e80) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xeb0
pnpbios: Found PnP BIOS data at 0xc00fbee0
pnpbios: Entry = f0000:bf10 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS CUSI-FX> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=06301039)
pcibios: BIOS version 2.10
Found $PIR table, 5 entries at 0xc00f1420
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 1 0 A 0x41 3 4 5 7 9 10 11 12
embedded 0 1 A 0x41 3 4 5 7 9 10 11 12
embedded 0 1 B 0x42 3 4 5 7 9 10 11 12
embedded 0 1 C 0x43 3 4 5 7 9 10 11 12
embedded 0 1 D 0x44 3 4 5 7 9 10 11 12
slot 1 0 13 A 0x41 3 4 5 7 9 10 11 12
slot 1 0 13 B 0x42 3 4 5 7 9 10 11 12
slot 1 0 13 C 0x43 3 4 5 7 9 10 11 12
slot 1 0 13 D 0x44 3 4 5 7 9 10 11 12
slot 2 0 14 A 0x42 3 4 5 7 9 10 11 12
slot 2 0 14 B 0x43 3 4 5 7 9 10 11 12
slot 2 0 14 C 0x44 3 4 5 7 9 10 11 12
slot 2 0 14 D 0x41 3 4 5 7 9 10 11 12
embedded 0 5 A 0x43 3 4 5 7 9 10 11 12
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi0: Power Button (fixed)
atpic: Programming IRQ9 as level/low
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
unknown: not probed (disabled)
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+
low,level,sharable 0.1.0
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+
low,level,sharable 0.1.1
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+
low,level,sharable 0.1.2
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 5+
low,level,sharable 0.1.3
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+
low,level,sharable 0.13.0
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+
low,level,sharable 0.13.1
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+
low,level,sharable 0.13.2
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 5+
low,level,sharable 0.13.3
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+
low,level,sharable 0.14.0
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+
low,level,sharable 0.14.1
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 5+
low,level,sharable 0.14.2
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+
low,level,sharable 0.14.3
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 10+
low,level,sharable 0.5.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 1, range 32, base ec000000, size 26, enabled
found-> vendor=0x1039, dev=0x0630, revid=0x21
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000d800, size 4, enabled
found-> vendor=0x1039, dev=0x5513, revid=0xd0
bus=0, slot=0, func=1
class=01-01-80, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x0008, revid=0x00
bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000d400, size 8, enabled
map[14]: type 1, range 32, base eb800000, size 12, enabled
pcib0: matched entry for 0.1.INTC (src \\_SB_.LNKC)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKC (references 4, priority 46040):
interrupts: 11 10 5 9 12 7 6 4
3 15 14
penalty: 130 130 180 260 5130 5130 5130 5130
5130 50130 50130
\\_SB_.LNKA (references 3, priority 34530):
interrupts: 11 10 5 9 12 7 6 4
3 15 14
penalty: 130 130 180 260 5130 5130 5130 5130
5130 50130 50130
\\_SB_.LNKB (references 3, priority 34530):
interrupts: 11 10 5 9 12 7 6 4
3 15 14
penalty: 130 130 180 260 5130 5130 5130 5130
5130 50130 50130
\\_SB_.LNKD (references 3, priority 34530):
interrupts: 11 10 5 9 12 7 6 4
3 15 14
penalty: 130 130 180 260 5130 5130 5130 5130
5130 50130 50130
pcib0: slot 1 INTC routed to irq 10 via \\_SB_.LNKC
found-> vendor=0x1039, dev=0x0900, revid=0x83
bus=0, slot=1, func=1
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750
ns)
intpin=c, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base eb000000, size 12, enabled
pcib0: matched entry for 0.1.INTD (src \\_SB_.LNKD)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKA (references 3, priority 34966):
interrupts: 11 10 5 9 12 7 6 4
3 15 14
penalty: 260 300 310 520 5260 5260 5260 5260
5260 50260 50260
\\_SB_.LNKB (references 3, priority 34966):
interrupts: 11 10 5 9 12 7 6 4
3 15 14
penalty: 260 300 310 520 5260 5260 5260 5260
5260 50260 50260
\\_SB_.LNKD (references 3, priority 34966):
interrupts: 11 10 5 9 12 7 6 4
3 15 14
penalty: 260 300 310 520 5260 5260 5260 5260
5260 50260 50260
pcib0: slot 1 INTD routed to irq 5 via \\_SB_.LNKD
found-> vendor=0x1039, dev=0x7001, revid=0x07
bus=0, slot=1, func=2
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=5
map[10]: type 1, range 32, base ea800000, size 12, enabled
pcib0: matched entry for 0.1.INTD (src \\_SB_.LNKD)
pcib0: slot 1 INTD is already routed to irq 5
found-> vendor=0x1039, dev=0x7001, revid=0x07
bus=0, slot=1, func=3
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=5
found-> vendor=0x1039, dev=0x0001, revid=0x00
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00009800, size 8, enabled
pcib0: matched entry for 0.5.INTA (src \\_SB_.LNKC)
pcib0: slot 5 INTA is already routed to irq 10
found-> vendor=0x13f6, dev=0x0111, revid=0x10
bus=0, slot=5, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0085, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
agp0: <SiS 630 host to AGP bridge> mem 0xec000000-0xefffffff at device 0.0
on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xec000000
agp0: allocating GATT for aperture of size 64M
atapci0: <SiS 630 UDMA66 controller> port
0xd800-0xd80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 0.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd800
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xeb800000-0xeb800fff
irq 10 at device 1.1 on pci0
sis0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd400
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x000760, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: bpf attached
sis0: Ethernet address: 00:e0:18:5e:b5:93
sis0: [MPSAFE]
ohci0: <SiS 5571 USB controller> mem 0xeb000000-0xeb000fff irq 5 at device
1.2 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xeb000000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xea800000-0xea800fff irq 5 at device
1.3 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xea800000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xa000-0xafff
pcib1: memory decode 0xe9800000-0xe9ffffff
pcib1: prefetched decode 0xf0000000-0xfeafffff
ACPI PCI link initial configuration:
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 11+
low,level,sharable 1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base f0000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xf0000000-0xf7ffffff
map[14]: type 1, range 32, base e9800000, size 17, enabled
pcib1: device (null) requested decoded memory range 0xe9800000-0xe981ffff
map[18]: type 4, range 32, base 0000a800, size 7, enabled
pcib1: device (null) requested decoded I/O range 0xa800-0xa87f
pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKA)
pcib1: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKA (references 4, priority 46712):
interrupts: 11 10 5 9 12 7 6 4
3 15 14
penalty: 280 320 360 540 5280 5280 5280 5280
5280 50280 50280
\\_SB_.LNKB (references 3, priority 35034):
interrupts: 11 10 5 9 3 4 6 7
12 14 15
penalty: 280 320 360 540 5280 5280 5280 5280
5280 50280 50280
pcib1: slot 0 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x1039, dev=0x6300, revid=0x21
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pcm0: <CMedia CMI8738> port 0x9800-0x98ff irq 10 at device 5.0 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x9800
pcm0: [MPSAFE]
pcm0: sndbuf_setmap e9e7000, 4000; 0xcfd07000 -> e9e7000
pcm0: sndbuf_setmap e9e3000, 4000; 0xcfd0b000 -> e9e3000
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: cannot allocate I/O port (6 ports)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 801821583 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on SiS 630 chip
ata0-master: setting UDMA66 on SiS 630 chip
ad0: <SAMSUNG SP1614N/TM100-30> ATA-7 disk at ata0-master
ad0: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
GEOM: new disk ad0
ata1-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata1-master: setting PIO4 on SiS 630 chip
ata1-master: setting UDMA66 on SiS 630 chip
ad2: <SAMSUNG SP1614N/TM100-30> ATA-7 disk at ata1-master
ad2: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA66
GEOM_MIRROR: Device gm0 created (id=4283719881).
GEOM_MIRROR: Device gm0: provider ad0 detected.
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 160039240704 end 160039272959
GEOM: new disk ad2
GEOM_MIRROR: Device gm0: provider ad2 detected.
GEOM_MIRROR: Device gm0: provider ad2 activated.
GEOM_MIRROR: Device gm0: provider ad0 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s1, start 32256 length 160039240704 end 160039272959
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure mirror/gm0s1, start 32256 length 160039240704 end
160039272959
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure mirror/gm0s1a, start 0 length 268435456 end 268435455
GEOM: Configure mirror/gm0s1b, start 268435456 length 477011968 end
745447423
GEOM: Configure mirror/gm0s1c, start 0 length 160039240704 end 160039240703
GEOM: Configure mirror/gm0s1d, start 745447424 length 268435456 end
1013882879
GEOM: Configure mirror/gm0s1e, start 1013882880 length 268435456 end
1282318335
GEOM: Configure mirror/gm0s1f, start 1282318336 length 8589934592 end
9872252927
GEOM: Configure mirror/gm0s1g, start 9872252928 length 150166987776 end
160039240703
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
Mounting root from ufs:/dev/mirror/gm0s1a
start_init: trying /sbin/init
----------------end dmesg-------------
greetings,
Sebastian Pahlke
More information about the freebsd-acpi
mailing list