Network doesn't work with acpi enabled
Samuel Moñux
smonux at gmail.com
Sun Oct 10 15:25:19 PDT 2004
On Sun, 10 Oct 2004 09:55:40 -0700, Nate Lawson <nate at root.org> wrote:
> Samuel Moñux wrote:
> > I have recently installed 5.3-Beta7 on a box with a Jetway
> > motherboard. When acpi is enabled, network doesn't work and console
> > output shows this message
> > xl0: watchdog timeout
> >
> > When its disabled, it seems to work fine. This box was running
> > 5.1-Release some time ago without problems.
> >
> > I don't know anything about ACPI so I hardly can do anything to fix
> > it. Any help will be appreciated.
> >
> > (This could be the same problem that is reported as i386/72215)
> >
> > -- dmesg output (ACPI enabled):
> >
> > acpi0: <JETWAY AWRDACPI> on motherboard
> > acpi0: Power Button (fixed)
>
> Ok, it's getting bad -- I'm starting to recognize OEM BIOS reference
> code by its behavior.
>
> > xl0: <3Com 3c900B-TPO Etherlink XL> port 0xec00-0xec7f mem
> > 0xd9000000-0xd900007f irq 5 at device
> > 15.0 on pci0
> > xl0: selecting 10baseT transceiver, half duplex
> > xl0: Ethernet address: 00:04:76:db:19:9f
>
> A dmesg from boot -v with acpi disabled and enabled would help. The irq
> routing stuff is hidden there.
>
> -Nate
>
I forgot to mention that the motherboard is a Jetway 993AN/993AS.
- verbose dmesg with acpi
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA7 #0: Sat Oct 2 21:01:00 UTC 2004
root at wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a0d000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a0d200.
Calibrating clock(s) ... i8254 clock: 1193281 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 800033259 Hz
CPU: Intel Pentium III (800.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 402587648 (383 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x00000000178fffff, 382562304 bytes (93399 pages)
avail memory = 384266240 (366 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fac20
bios32: Entry = 0xfb0a0 (c00fb0a0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb0d0
pnpbios: Found PnP BIOS data at 0xc00fbd40
pnpbios: Entry = f0000:bd68 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <JETWAY AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00fdb70
PCI-Only Interrupts: 5 10 11
Location Bus Device Pin Link IRQs
slot 1 0 9 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 D 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 11 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 2 0 11 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 11 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 11 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 15 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 0 15 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 4 0 15 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 15 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 A 0x05 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 D 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15
embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks BAD min = 1, max = 4, width = 3
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
ACPI timer looks GOOD min = 1, max = 2, width = 1
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.9.0
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.9.1
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.9.2
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.9.3
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.11.0
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.11.1
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.11.2
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.11.3
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.13.0
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.13.1
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.13.2
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.13.3
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.15.0
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.15.1
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.15.2
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.15.3
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.17.0
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.17.1
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.17.2
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.17.3
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.7.0
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.7.1
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.7.2
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.7.3
\\_SB_.PCI0.LNKA irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 11+
low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 0+
low,level,sharable 0.1.1
\\_SB_.PCI0.LNKC irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 5+
low,level,sharable 0.1.2
\\_SB_.PCI0.LNKD irq 0: [ 1 3 4 5 6 7 10 11 12 14 15] 10+
low,level,sharable 0.1.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base d0000000, size 26, enabled
found-> vendor=0x1106, dev=0x0691, revid=0x44
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x8598, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x0596, revid=0x23
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000e000, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x10
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000e400, size 5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.LNKD)
pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKA (references 7, priority 145173):
interrupts: 11 10 5 12 7 6 4 3 15 14 1
penalty: 280 280 330 5280 5280 5280 5280 5280 50280 50280100280
\\_SB_.PCI0.LNKB (references 7, priority 145173):
interrupts: 11 10 5 12 7 6 4 3 15 14 1
penalty: 280 280 330 5280 5280 5280 5280 5280 50280 50280100280
\\_SB_.PCI0.LNKC (references 7, priority 145173):
interrupts: 11 10 5 12 7 6 4 3 15 14 1
penalty: 280 280 330 5280 5280 5280 5280 5280 50280 50280100280
\\_SB_.PCI0.LNKD (references 7, priority 145173):
interrupts: 11 10 5 12 7 6 4 3 15 14 1
penalty: 280 280 330 5280 5280 5280 5280 5280 50280 50280100280
pcib0: slot 7 INTD routed to irq 10 via \\_SB_.PCI0.LNKD
found-> vendor=0x1106, dev=0x3038, revid=0x11
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3050, revid=0x30
bus=0, slot=7, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000e800, size 6, enabled
pcib0: matched entry for 0.9.INTA (src \\_SB_.PCI0.LNKA)
pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKA (references 7, priority 147178):
interrupts: 11 5 10 12 7 6 4 3 15 14 1
penalty: 560 610 630 5560 5560 5560 5560 5560 50560 50560100560
\\_SB_.PCI0.LNKB (references 7, priority 147178):
interrupts: 11 5 10 12 7 6 4 3 15 14 1
penalty: 560 610 630 5560 5560 5560 5560 5560 50560 50560100560
\\_SB_.PCI0.LNKC (references 7, priority 147178):
interrupts: 11 5 10 12 7 6 4 3 15 14 1
penalty: 560 610 630 5560 5560 5560 5560 5560 50560 50560100560
pcib0: slot 9 INTA routed to irq 11 via \\_SB_.PCI0.LNKA
found-> vendor=0x1274, dev=0x5880, revid=0x02
bus=0, slot=9, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=11
powerspec 1 supports D0 D2 D3 current D0
map[10]: type 4, range 32, base 0000ec00, size 7, enabled
map[14]: type 1, range 32, base d9000000, size 7, enabled
pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.LNKC)
pcib0: possible interrupts: 1 3 4 5 6 7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKB (references 7, priority 149182):
interrupts: 5 11 10 12 7 6 4 3 15 14 1
penalty: 890 910 910 5840 5840 5840 5840 5840 50840 50840100840
\\_SB_.PCI0.LNKC (references 7, priority 149182):
interrupts: 5 11 10 12 7 6 4 3 15 14 1
penalty: 890 910 910 5840 5840 5840 5840 5840 50840 50840100840
pcib0: slot 15 INTA routed to irq 5 via \\_SB_.PCI0.LNKC
found-> vendor=0x10b7, dev=0x9004, revid=0x04
bus=0, slot=15, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x30 (12000 ns)
intpin=a, irq=5
powerspec 1 supports D0 D1 D2 D3 current D0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem
0xd0000000-0xd3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xd4000000-0xd5ffffff
pcib1: prefetched decode 0xd6000000-0xd7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base d4000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xd4000000-0xd4ffffff
map[14]: type 3, range 32, base d6000000, size 25, enabled
pcib1: device (null) requested decoded memory range 0xd6000000-0xd7ffffff
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LNKA)
pcib0: slot 1 INTA is already routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=0x10de, dev=0x002d, revid=0x15
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596B UDMA66 controller> port
0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on
pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=10 stat1=10 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 10 at device
7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 9.0 (no driver attached)
xl0: <3Com 3c900B-TPO Etherlink XL> port 0xec00-0xec7f mem
0xd9000000-0xd900007f irq 5 at device 15.0 on pci0
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xd9000000
xl0: using memory mapped I/O
xl0: media options word: 8
xl0: guessing 10BaseT transceiver
xl0: found 10baseT
xl0: selecting 10baseT transceiver, half duplex
xl0: bpf attached
xl0: Ethernet address: 00:04:76:db:19:9f
xl0: [MPSAFE]
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> flags 0x24 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model 4D+ Mouse, device ID 8-00, 4 buttons
psm0: config:00000024, flags:00000008, packet size:3
psm0: syncmask:c8, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 14: ioport 0xec00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 800033259 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 82C596B chip
ata0-master: setting UDMA66 on VIA 82C596B chip
ata0-slave: setting PIO4 on VIA 82C596B chip
ata0-slave: setting UDMA66 on VIA 82C596B chip
ad0: <WDC WD200EB-00BHF0/15.15M15> ATA-5 disk at ata0-master
ad0: 19092MB (39102336 sectors), 38792 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
ar: FreeBSD check1 failed
ad1: <ST360021A/3.19> ATA-5 disk at ata0-slave
ad1: 57241MB (117231408 sectors), 116301 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA66
ar: FreeBSD check1 failed
ata1-slave: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on VIA 82C596B chip
ata1-master: setting UDMA33 on VIA 82C596B chip
ata1-slave: setting PIO4 on VIA 82C596B chip
acd0: <ATAPI-CD ROM-DRIVE-50MAX/VER 50NT> CDROM drive at ata1 as master
acd0: read 687KB/s (6875KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: <PCRW804/2,0> CDRW drive at ata1 as slave
acd1: read 5515KB/s (5515KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4
acd1: Reads: CDR, CDRW, CDDA stream, packet
acd1: Writes: CDR, CDRW, test write
acd1: Audio: play, 2 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
GEOM: new disk ad0
GEOM: new disk ad1
[0] f:80 typ:11 s(CHS):0/1/1 e(CHS):637/254/63 s:63 l:10249407
[1] f:00 typ:5 s(CHS):638/0/1 e(CHS):1023/254/63 s:10249470 l:28852740
[2] f:00 typ:0 s(CHS):1022/254/63 e(CHS):1022/254/63 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 5247696384 end 5247728639
GEOM: Configure ad0s2, start 5247728640 length 14772602880 end 20020331519
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):85/254/63 s:63 l:1381527
[1] f:00 typ:5 s(CHS):86/0/1 e(CHS):1023/254/63 s:1381590 l:68372640
[2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:69754230 l:47472075
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 707341824 end 707374079
GEOM: Configure ad1s2, start 707374080 length 35006791680 end 35714165759
GEOM: Configure ad1s3, start 35714165760 length 24305702400 end 60019868159
MBREXT Slice 5 on ad0s2:
[0] f:00 typ:7 s(CHS):638/1/1 e(CHS):1023/254/63 s:63 l:19551042
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:19551105 l:9301635
GEOM: Configure ad0s5, start 32256 length 10010133504 end 10010165759
MBREXT Slice 6 on ad0s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:9301572
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s6, start 10010198016 length 4762404864 end 14772602879
MBREXT Slice 5 on ad1s2:
[0] f:00 typ:130 s(CHS):86/1/1 e(CHS):135/254/63 s:63 l:803187
[1] f:00 typ:5 s(CHS):136/0/1 e(CHS):1023/254/63 s:803250 l:23454900
GEOM: Configure ad1s5, start 32256 length 411231744 end 411263999
MBREXT Slice 6 on ad1s2:
[0] f:00 typ:131 s(CHS):136/1/1 e(CHS):1023/254/63 s:63 l:23454837
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:24258150 l:25398765
GEOM: Configure ad1s6, start 411296256 length 12008876544 end 12420172799
MBREXT Slice 7 on ad1s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:25398702
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:49656915 l:1975995
GEOM: Configure ad1s7, start 12420205056 length 13004135424 end 25424340479
MBREXT Slice 8 on ad1s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:1975932
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s8, start 25424372736 length 1011677184 end 26436049919
GEOM: Configure ad1s3a, start 0 length 536870912 end 536870911
GEOM: Configure ad1s3b, start 16777216000 length 419430400 end 17196646399
GEOM: Configure ad1s3c, start 0 length 24305702400 end 24305702399
GEOM: Configure ad1s3d, start 536870912 length 134217728 end 671088639
GEOM: Configure ad1s3e, start 671088640 length 16106127360 end 16777215999
Mounting root from ufs:/dev/ad1s3a
start_init: trying /sbin/init
xl0: watchdog timeout
xl0: watchdog timeout
- verbose dmesg without acpi
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA7 #0: Sat Oct 2 21:01:00 UTC 2004
root at wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09b9000.
Calibrating clock(s) ... i8254 clock: 1193281 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 800033427 Hz
CPU: Intel Pentium III (800.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 402587648 (383 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x00000000178fffff, 382562304 bytes (93399 pages)
avail memory = 384274432 (366 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fac20
bios32: Entry = 0xfb0a0 (c00fb0a0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb0d0
pnpbios: Found PnP BIOS data at 0xc00fbd40
pnpbios: Entry = f0000:bd68 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00fdb70
PCI-Only Interrupts: 5 10 11
Location Bus Device Pin Link IRQs
slot 1 0 9 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 D 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 11 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 2 0 11 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 11 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 11 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 13 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 15 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 0 15 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 4 0 15 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 15 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 A 0x05 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 D 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15
embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x1 255 N 6 3 4 5 7 9 10 11 12 14 15
0x2 255 N 6 3 4 5 7 9 10 11 12 14 15
0x3 255 N 7 3 4 5 7 9 10 11 12 14 15
0x5 255 N 7 3 4 5 7 9 10 11 12 14 15
$PIR: Found matching pin for 0.9.INTA at func 0: 11
$PIR: Found matching pin for 0.15.INTA at func 0: 5
$PIR: Found matching pin for 0.7.INTD at func 2: 10
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x1 11 Y 6 3 4 5 7 9 10 11 12 14 15
0x2 255 N 6 3 4 5 7 9 10 11 12 14 15
0x3 5 Y 7 3 4 5 7 9 10 11 12 14 15
0x5 10 Y 7 3 4 5 7 9 10 11 12 14 15
$PIR: IRQs used by BIOS: 5 10 11
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 7 0 0 0 0 7 6 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base d0000000, size 26, enabled
found-> vendor=0x1106, dev=0x0691, revid=0x44
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x8598, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x0596, revid=0x23
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000e000, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x10
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000e400, size 5, enabled
$PIR: 0:7 INTD routed to irq 10
found-> vendor=0x1106, dev=0x3038, revid=0x11
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3050, revid=0x30
bus=0, slot=7, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000e800, size 6, enabled
$PIR: 0:9 INTA routed to irq 11
found-> vendor=0x1274, dev=0x5880, revid=0x02
bus=0, slot=9, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=11
powerspec 1 supports D0 D2 D3 current D0
map[10]: type 4, range 32, base 0000ec00, size 7, enabled
map[14]: type 1, range 32, base d9000000, size 7, enabled
$PIR: 0:15 INTA routed to irq 5
found-> vendor=0x10b7, dev=0x9004, revid=0x04
bus=0, slot=15, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x30 (12000 ns)
intpin=a, irq=5
powerspec 1 supports D0 D1 D2 D3 current D0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem
0xd0000000-0xd3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xd4000000-0xd5ffffff
pcib1: prefetched decode 0xd6000000-0xd7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base d4000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xd4000000-0xd4ffffff
map[14]: type 3, range 32, base d6000000, size 25, enabled
pcib1: device (null) requested decoded memory range 0xd6000000-0xd7ffffff
$PIR: 0:1 INTA routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=0x10de, dev=0x002d, revid=0x15
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596B UDMA66 controller> port
0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on
pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=10 stat1=10 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 10 at device
7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 9.0 (no driver attached)
xl0: <3Com 3c900B-TPO Etherlink XL> port 0xec00-0xec7f mem
0xd9000000-0xd900007f irq 5 at device 15.0 on pci0
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xd9000000
xl0: using memory mapped I/O
xl0: media options word: 8
xl0: guessing 10BaseT transceiver
xl0: found 10baseT
xl0: selecting 10baseT transceiver, half duplex
xl0: bpf attached
xl0: Ethernet address: 00:04:76:db:19:9f
xl0: [MPSAFE]
cpu0 on motherboard
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
pnpbios: 15 devices, largest 98 bytes
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x17ffffff, size=0x17f00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfbfff, size=0x4000
PNP0c02: adding fixed memory32 range 0xfc000-0xfffff, size=0x4000
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x480-0x48f, size=0x10, align=0
PNP0a03: adding io range 0x4000-0x407f, size=0x80, align=0
PNP0a03: adding io range 0x4080-0x40ff, size=0x80, align=0
PNP0a03: adding io range 0x5000-0x501f, size=0x20, align=0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 10 device ID PNP0f13 (130fd041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0
PNP0700: adding irq mask 0x40
pnpbios: handle 13 device ID PNP0700 (0007d041)
PNP0401: adding dma mask 0x8
PNP0401: adding irq mask 0x80
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77b, size=0x4, align=0
pnpbios: handle 15 device ID PNP0401 (0104d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 16 device ID PNP0501 (0105d041)
ahc_isa_probe 14: ioport 0xec00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> flags 0x24 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model 4D+ Mouse, device ID 8-00, 4 buttons
psm0: config:00000024, flags:00000008, packet size:3
psm0: syncmask:c8, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is
0x100. Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is
0x100. Failing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is
0x100. Failing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is
0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is
0x100. Failing probe.
ahc0: No resources allocated.
ahc0: No resources allocated.
adv1: Invalid baseport of 0x4d0 specified. Nearest valid baseport is
0x330. Failing probe.
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 800033427 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 82C596B chip
ata0-master: setting UDMA66 on VIA 82C596B chip
ata0-slave: setting PIO4 on VIA 82C596B chip
ata0-slave: setting UDMA66 on VIA 82C596B chip
ad0: <WDC WD200EB-00BHF0/15.15M15> ATA-5 disk at ata0-master
ad0: 19092MB (39102336 sectors), 38792 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
ar: FreeBSD check1 failed
ad1: <ST360021A/3.19> ATA-5 disk at ata0-slave
ad1: 57241MB (117231408 sectors), 116301 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA66
ar: FreeBSD check1 failed
ata1-slave: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on VIA 82C596B chip
ata1-master: setting UDMA33 on VIA 82C596B chip
ata1-slave: setting PIO4 on VIA 82C596B chip
acd0: <ATAPI-CD ROM-DRIVE-50MAX/VER 50NT> CDROM drive at ata1 as master
acd0: read 687KB/s (6875KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: <PCRW804/2,0> CDRW drive at ata1 as slave
acd1: read 5515KB/s (5515KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4
acd1: Reads: CDR, CDRW, CDDA stream, packet
acd1: Writes: CDR, CDRW, test write
acd1: Audio: play, 2 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
GEOM: new disk ad0
GEOM: new disk ad1
[0] f:80 typ:11 s(CHS):0/1/1 e(CHS):637/254/63 s:63 l:10249407
[1] f:00 typ:5 s(CHS):638/0/1 e(CHS):1023/254/63 s:10249470 l:28852740
[2] f:00 typ:0 s(CHS):1022/254/63 e(CHS):1022/254/63 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 5247696384 end 5247728639
GEOM: Configure ad0s2, start 5247728640 length 14772602880 end 20020331519
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):85/254/63 s:63 l:1381527
[1] f:00 typ:5 s(CHS):86/0/1 e(CHS):1023/254/63 s:1381590 l:68372640
[2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:69754230 l:47472075
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 707341824 end 707374079
GEOM: Configure ad1s2, start 707374080 length 35006791680 end 35714165759
GEOM: Configure ad1s3, start 35714165760 length 24305702400 end 60019868159
MBREXT Slice 5 on ad0s2:
[0] f:00 typ:7 s(CHS):638/1/1 e(CHS):1023/254/63 s:63 l:19551042
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:19551105 l:9301635
GEOM: Configure ad0s5, start 32256 length 10010133504 end 10010165759
MBREXT Slice 6 on ad0s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:9301572
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s6, start 10010198016 length 4762404864 end 14772602879
MBREXT Slice 5 on ad1s2:
[0] f:00 typ:130 s(CHS):86/1/1 e(CHS):135/254/63 s:63 l:803187
[1] f:00 typ:5 s(CHS):136/0/1 e(CHS):1023/254/63 s:803250 l:23454900
GEOM: Configure ad1s5, start 32256 length 411231744 end 411263999
MBREXT Slice 6 on ad1s2:
[0] f:00 typ:131 s(CHS):136/1/1 e(CHS):1023/254/63 s:63 l:23454837
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:24258150 l:25398765
GEOM: Configure ad1s6, start 411296256 length 12008876544 end 12420172799
MBREXT Slice 7 on ad1s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:25398702
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:49656915 l:1975995
GEOM: Configure ad1s7, start 12420205056 length 13004135424 end 25424340479
MBREXT Slice 8 on ad1s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:1975932
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s8, start 25424372736 length 1011677184 end 26436049919
GEOM: Configure ad1s3a, start 0 length 536870912 end 536870911
GEOM: Configure ad1s3b, start 16777216000 length 419430400 end 17196646399
GEOM: Configure ad1s3c, start 0 length 24305702400 end 24305702399
GEOM: Configure ad1s3d, start 536870912 length 134217728 end 671088639
GEOM: Configure ad1s3e, start 671088640 length 16106127360 end 16777215999
Mounting root from ufs:/dev/ad1s3a
start_init: trying /sbin/init
More information about the freebsd-acpi
mailing list