IBM x20 Thinkpad

RT iam at rbt.ca
Thu May 13 10:40:38 PDT 2004


With ACPI enabled, 90% of my attempts to start X result in a freeze. If
X starts, it runs without any problems from that point forward so I can
only assume it has to do with probing for the video card.

With hint.acpi.0.disabled="1" in /boot/device.hints, I do not have any
issues with freezes and X.

IBM ThinkPad x20 2662-37u ASL file:
        http://www.rbt.ca/temp/rbt-IBMx20266237u.asl

-- 
Rod Taylor <rbt [at] rbt [dot] ca>

Build A Brighter Lamp :: Linux Apache {middleware} PostgreSQL
PGP Key: http://www.rbt.ca/signature.asc
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
    root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a351f4.
Calibrating clock(s) ... i8254 clock: 1193066 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 312871914 Hz
CPU: Intel Pentium III (312.87-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 335478784 (319 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x0000000013a29fff, 316674048 bytes (77313 pages)
avail memory = 316243968 (301 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6f40
bios32: Entry = 0xfd820 (c00fd820)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd7b0+0x19f
pnpbios: Found PnP BIOS data at 0xc00f6f70
pnpbios: Entry = f0000:adbc  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD    RSDT  > on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdee0
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    7    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    1    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    8    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    8    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    8    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   11    A   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 1      0   10    A   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 1      0   10    B   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    4    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    4    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    4    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    4    D   0x63  3 4 5 6 7 9 10 11 12 14 15
slot 2      8    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 2      8    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
slot 2      8    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 2      8    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    8    1    A   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    8    2    A   0x62  3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0._INI] (Node 0xc18475a0), AE_AML_NO_RETURN_VALUE
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 8 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 8 func 1
acpi0: Power Button (fixed)
ACPI timer looks BAD  min = 2, max = 6, width = 4
ACPI timer looks BAD  min = 2, max = 6, width = 4
ACPI timer looks BAD  min = 2, max = 6, width = 4
ACPI timer looks BAD  min = 2, max = 6, width = 4
ACPI timer looks BAD  min = 2, max = 6, width = 4
ACPI timer looks BAD  min = 2, max = 6, width = 4
ACPI timer looks BAD  min = 2, max = 7, width = 5
ACPI timer looks BAD  min = 2, max = 6, width = 4
ACPI timer looks BAD  min = 2, max = 6, width = 4
ACPI timer looks BAD  min = 2, max = 6, width = 4
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq  10: [  9 11] low,level,sharable 0.1.0
\\_SB_.LNKD irq   9: [  9 11] low,level,sharable 0.7.3
\\_SB_.LNKA irq  10: [  9 11] low,level,sharable 0.8.0
\\_SB_.LNKB irq   4: [  9 11] low,level,sharable 0.8.1
\\_SB_.LNKC irq   5: [  9 11] low,level,sharable 0.8.2
\\_SB_.LNKC irq   5: [  9 11] low,level,sharable 0.10.0
\\_SB_.LNKD irq   9: [  9 11] low,level,sharable 0.10.1
\\_SB_.LNKA irq  10: [  9 11] low,level,sharable 0.11.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq  10: [  9 11] low,level,sharable 0.1.0
\\_SB_.LNKD irq   9: [  9 11] low,level,sharable 0.7.3
\\_SB_.LNKA irq  10: [  9 11] low,level,sharable 0.8.0
\\_SB_.LNKB irq   4: [  9 11] low,level,sharable 0.8.1
\\_SB_.LNKC irq   5: [  9 11] low,level,sharable 0.8.2
\\_SB_.LNKC irq   5: [  9 11] low,level,sharable 0.10.0
\\_SB_.LNKD irq   9: [  9 11] low,level,sharable 0.10.1
\\_SB_.LNKA irq  10: [  9 11] low,level,sharable 0.11.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base f8000000, size 26, enabled
found->	vendor=0x8086, dev=0x7190, revid=0x03
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x7191, revid=0x03
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x001f, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x7110, revid=0x02
	bus=0, slot=7, func=0
	class=06-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 00001800, size  4, enabled
found->	vendor=0x8086, dev=0x7111, revid=0x01
	bus=0, slot=7, func=1
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 00001820, size  5, enabled
pcib0: matched entry for 0.7.INTD (source \\_SB_.LNKD)
pcib0: slot 7 INTD is routed to irq 9
found->	vendor=0x8086, dev=0x7112, revid=0x01
	bus=0, slot=7, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=9
	map[90]: type 4, range 32, base 00001040, size  4, enabled
found->	vendor=0x8086, dev=0x7113, revid=0x03
	bus=0, slot=7, func=3
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base 50000000, size 12, enabled
pcib0: matched entry for 0.8.INTA (source \\_SB_.LNKA)
pcib0: slot 8 INTA is routed to irq 10
found->	vendor=0x1180, dev=0x0476, revid=0x80
	bus=0, slot=8, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
	intpin=a, irq=10
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 50100000, size 12, enabled
pcib0: matched entry for 0.8.INTB (source \\_SB_.LNKB)
pcib0: slot 8 INTB is routed to irq 4
found->	vendor=0x1180, dev=0x0476, revid=0x80
	bus=0, slot=8, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
	intpin=b, irq=4
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 00002000, size  8, enabled
	map[14]: type 1, range 32, base f4011400, size  7, enabled
	map[18]: type 1, range 32, base f4011000, size  7, enabled
pcib0: matched entry for 0.10.INTA (source \\_SB_.LNKC)
pcib0: slot 10 INTA is routed to irq 5
found->	vendor=0x10b7, dev=0x6056, revid=0x20
	bus=0, slot=10, func=0
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D3
	map[10]: type 4, range 32, base 00002400, size  8, enabled
	map[14]: type 1, range 32, base f4011c00, size  8, enabled
	map[18]: type 1, range 32, base f4011800, size  7, enabled
pcib0: matched entry for 0.10.INTA (source \\_SB_.LNKC)
pcib0: slot 10 INTA is routed to irq 5
found->	vendor=0x10b7, dev=0x1007, revid=0x20
	bus=0, slot=10, func=1
	class=07-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0013, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D2 D3  current D0
	map[10]: type 1, range 32, base f4010000, size 12, enabled
	map[14]: type 1, range 32, base f4000000, size 16, enabled
pcib0: matched entry for 0.11.INTA (source \\_SB_.LNKA)
pcib0: slot 11 INTA is routed to irq 10
found->	vendor=0x1013, dev=0x6005, revid=0x01
	bus=0, slot=11, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x3000-0x3fff
pcib1:   memory decode     0xf4100000-0xf5ffffff
pcib1:   prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\\_SB_.LNKA irq  10: [  9 11] low,level,sharable 1.0.0
\\_SB_.LNKB irq   4: [  9 11] low,level,sharable 1.0.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq  10: [  9 11] low,level,sharable 1.0.0
\\_SB_.LNKB irq   4: [  9 11] low,level,sharable 1.0.1
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base f5000000, size 24, enabled
	map[14]: type 4, range 32, base 00003000, size  8, enabled
	map[18]: type 1, range 32, base f4100000, size 12, enabled
pcib1: matched entry for 1.0.INTA (source \\_SB_.LNKA)
pcib1: slot 0 INTA is routed to irq 10
found->	vendor=0x1002, dev=0x4c4d, revid=0x64
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1800-0x180f at device 7.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1-slave:  stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x0
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1820-0x183f irq 9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 10 at device 8.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0x04761180 0x02100007 0x06070080 0x00824000 
  0x10: 0x50000000 0x020000dc 0xb0040200 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010a 
  0x40: 0x01851014 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x04800001 0x00000000 0x04630464 0x30000000 
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xa0: 0x00000000 0x20150fff 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x01851014 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0xfe190001 
  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cbb1: <RF5C476 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 4 at device 8.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0x04761180 0x02100007 0x06070080 0x00824000 
  0x10: 0x50100000 0x020000dc 0xb0070500 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x07000204 
  0x40: 0x01851014 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x04800001 0x00000000 0x04630463 0x30000000 
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xa0: 0x00000000 0x20150fff 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x01851014 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0xfe190001 
  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
xl0: <3Com 3c556B Fast Etherlink XL> port 0x2000-0x20ff mem 0xf4011000-0xf401107f,0xf4011400-0xf401147f irq 5 at device 10.0 on pci0
xl0: chip is in D3 power mode -- setting to D0
xl0: using memory mapped I/O
xl0: Ethernet address: 00:00:86:45:c3:b4
xl0: media options word: 40
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
acphy0: <AC101 10/100 media interface> on miibus0
acphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
pci0: <simple comms> at device 10.1 (no driver attached)
pci0: <multimedia, audio> at device 11.0 (no driver attached)
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 1 4 6 9
unknown: not probed (disabled)
ppc0: using extended I/O port range
acpi_ec0: <Embedded Controller: GPE 0x9, GLK> port 0x66,0x62 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi_ec0: info: new max delay is 2 us
acpi_ec0: info: new max delay is 32 us
acpi_ec0: info: new max delay is 40 us
acpi_ec0: info: new max delay is 170 us
acpi_ec0: info: new max delay is 400 us
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x201 0x201 0x201 0x201
sio0: probe failed test(s): 1 4 6 9
unknown: not probed (disabled)
ppc0: using extended I/O port range
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xdc000-0xdcfff,0xd8000-0xdbfff,0xcd000-0xcd7ff,0xc0000-0xccfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x201 0x201 0x201 0x201
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x201 0x201 0x201 0x201
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6a 1b 
24 b3 00 6f 0d 0e 00 00 07 80 49 8f 8f 28 1f 47 
6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6a 1b 
24 b3 00 6f 0d 0e 00 00 07 80 49 8f 8f 28 1f 47 
6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 312871914 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
acpi_ec0: info: new max delay is 600 us
acpi_cmbat0: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
GEOM: create disk ad0 dp=0xc34e4360
ad0: <IBM-DJSA-220/JS4IAC1A> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 41344 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:39070017
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 20003848704 end 20003880959
GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s1b, start 268435456 length 510435328 end 778870783
GEOM: Configure ad0s1c, start 0 length 20003848704 end 20003848703
GEOM: Configure ad0s1d, start 778870784 length 268435456 end 1047306239
GEOM: Configure ad0s1e, start 1047306240 length 268435456 end 1315741695
GEOM: Configure ad0s1f, start 1315741696 length 18688107008 end 20003848703
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
tun0: bpf attached
splash: image decoder found: green_saver
module_register: module if_tun already exists!
Module if_tun failed to register: 17
can't re-use a leaf (if_tun_debug)!
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
    root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e3000.
Calibrating clock(s) ... i8254 clock: 1193068 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 313081628 Hz
CPU: Intel Pentium III (313.08-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 335478784 (319 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x0000000013a29fff, 316674048 bytes (77313 pages)
avail memory = 316252160 (301 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6f40
bios32: Entry = 0xfd820 (c00fd820)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd7b0+0x19f
pnpbios: Found PnP BIOS data at 0xc00f6f70
pnpbios: Entry = f0000:adbc  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdee0
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    7    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    1    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    8    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    8    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    8    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   11    A   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 1      0   10    A   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 1      0   10    B   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    4    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    4    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    4    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    4    D   0x63  3 4 5 6 7 9 10 11 12 14 15
slot 2      8    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 2      8    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
slot 2      8    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 2      8    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    8    1    A   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    8    2    A   0x62  3 4 5 6 7 9 10 11 12 14 15
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base f8000000, size 26, enabled
found->	vendor=0x8086, dev=0x7190, revid=0x03
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x7191, revid=0x03
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x001f, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x80 (3840 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x7110, revid=0x02
	bus=0, slot=7, func=0
	class=06-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 00001800, size  4, enabled
found->	vendor=0x8086, dev=0x7111, revid=0x01
	bus=0, slot=7, func=1
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 00001820, size  5, enabled
pci_cfgintr_valid: BIOS irq 9 is valid
pci_cfgintr: 0:7 INTD BIOS irq 9
found->	vendor=0x8086, dev=0x7112, revid=0x01
	bus=0, slot=7, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=9
	map[90]: type 4, range 32, base 00001040, size  4, enabled
found->	vendor=0x8086, dev=0x7113, revid=0x03
	bus=0, slot=7, func=3
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base 50000000, size 12, enabled
pci_cfgintr_valid: BIOS irq 10 is valid
pci_cfgintr: 0:8 INTA BIOS irq 10
found->	vendor=0x1180, dev=0x0476, revid=0x80
	bus=0, slot=8, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
	intpin=a, irq=10
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 50100000, size 12, enabled
pci_cfgintr_valid: BIOS irq 4 is valid
pci_cfgintr: 0:8 INTB BIOS irq 4
found->	vendor=0x1180, dev=0x0476, revid=0x80
	bus=0, slot=8, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
	intpin=b, irq=4
	powerspec 1  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 00002000, size  8, enabled
	map[14]: type 1, range 32, base f4011400, size  7, enabled
	map[18]: type 1, range 32, base f4011000, size  7, enabled
pci_cfgintr_valid: BIOS irq 5 is valid
pci_cfgintr: 0:10 INTA BIOS irq 5
found->	vendor=0x10b7, dev=0x6056, revid=0x20
	bus=0, slot=10, func=0
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 00002400, size  8, enabled
	map[14]: type 1, range 32, base f4011c00, size  8, enabled
	map[18]: type 1, range 32, base f4011800, size  7, enabled
pci_cfgintr_valid: BIOS irq 5 is valid
pci_cfgintr: 0:10 INTA BIOS irq 5
found->	vendor=0x10b7, dev=0x1007, revid=0x20
	bus=0, slot=10, func=1
	class=07-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0013, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D2 D3  current D0
	map[10]: type 1, range 32, base f4010000, size 12, enabled
	map[14]: type 1, range 32, base f4000000, size 16, enabled
pci_cfgintr_valid: BIOS irq 10 is valid
pci_cfgintr: 0:11 INTA BIOS irq 10
found->	vendor=0x1013, dev=0x6005, revid=0x01
	bus=0, slot=11, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x18 (6000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x3000-0x3fff
pcib1:   memory decode     0xf4100000-0xf5ffffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base f5000000, size 24, enabled
	map[14]: type 4, range 32, base 00003000, size  8, enabled
	map[18]: type 1, range 32, base f4100000, size 12, enabled
pci_cfgintr_valid: BIOS irq 10 is valid
pci_cfgintr: 1:0 INTA BIOS irq 10
found->	vendor=0x1002, dev=0x4c4d, revid=0x64
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1800-0x180f at device 7.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1-slave:  stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x0
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1820-0x183f irq 9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piix0: <PIIX Timecounter> port 0x1040-0x104f at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 10 at device 8.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0x04761180 0x02100007 0x06070080 0x00824000 
  0x10: 0x50000000 0x020000dc 0xb0040200 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010a 
  0x40: 0x01851014 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x04800001 0x00000000 0x04630464 0x30000000 
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xa0: 0x00000000 0x20150fff 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x01851014 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0xfe190001 
  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cbb1: <RF5C476 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 4 at device 8.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0x04761180 0x02100007 0x06070080 0x00824000 
  0x10: 0x50100000 0x020000dc 0xb0070500 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x07000204 
  0x40: 0x01851014 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x04800001 0x00000000 0x04630463 0x30000000 
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xa0: 0x00000000 0x20150fff 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x01851014 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0xfe190001 
  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
xl0: <3Com 3c556B Fast Etherlink XL> port 0x2000-0x20ff mem 0xf4011000-0xf401107f,0xf4011400-0xf401147f irq 5 at device 10.0 on pci0
xl0: using memory mapped I/O
xl0: Ethernet address: 00:00:86:45:c3:b4
xl0: media options word: 40
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
acphy0: <AC101 10/100 media interface> on miibus0
acphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
pci0: <simple comms> at device 10.1 (no driver attached)
pci0: <multimedia, audio> at device 11.0 (no driver attached)
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
pnpbios: 18 devices, largest 224 bytes
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1
PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1
PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1
PNP0c02: adding io range 0x15e8-0x15e8, size=0x1, align=0x1
PNP0c02: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000
pnpbios: handle 0 device ID PNP0c02 (020cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xdc000-0xfffff, size=0x24000
PNP0c01: adding fixed memory32 range 0x100000-0x13ffffff, size=0x13f00000
pnpbios: handle 2 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 5 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 6 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 9 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x1000-0x103f, size=0x40, align=0x1
PNP0c02: adding io range 0x1040-0x104f, size=0x10, align=0x1
PNP0c02: adding io range 0x10-0x18, size=0x9, align=0x1
PNP0c02: adding io range 0x1f-0x1f, size=0x1, align=0x1
PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1
PNP0c02: adding io range 0x2c-0x2d, size=0x2, align=0x1
PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1
PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1
PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1
PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1
PNP0c02: adding io range 0x50-0x52, size=0x3, align=0x1
PNP0c02: adding io range 0x72-0x77, size=0x6, align=0x1
PNP0c02: adding io range 0x90-0x9f, size=0x10, align=0x1
PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1
PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1
PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1
PNP0c02: adding io range 0xb0-0xbd, size=0xe, align=0x1
pnpbios: handle 11 device ID PNP0c02 (020cd041)
pnpbios: handle 13 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xcd800-0xcffff, size=0x2800
pnpbios: handle 14 device ID PNP0c02 (020cd041)
pnpbios: handle 15 device ID PNP0501 (0105d041)
pnpbios: handle 16 device ID PNP0401 (0104d041)
IBM3780: adding irq mask 0x1000
pnpbios: handle 17 device ID IBM3780 (80374d24)
PNP0680: adding io range 0x1f0-0x1f7, size=0x8, align=0x1
PNP0680: adding io range 0x3f6-0x3f6, size=0x1, align=0x1
PNP0680: adding irq mask 0x4000
PNP0680: adding io range 0x1800-0x1807, size=0x8, align=0x1
pnpbios: handle 18 device ID PNP0680 (8006d041)
pnpbios: handle 24 device ID PNP0e03 (030ed041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xdc000-0xdcfff,0xd8000-0xdbfff,0xcd000-0xcd7ff,0xc0000-0xccfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6a 1b 
24 b3 00 6f 0d 0e 00 00 07 80 49 8f 8f 28 1f 47 
6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6a 1b 
24 b3 00 6f 0d 0e 00 00 07 80 49 8f 8f 28 1f 47 
6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x80 specified. Nearest valid baseport is 0x100.  Failing probe.
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100.  Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100.  Failing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100.  Failing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100.  Failing probe.
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100.  Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330.  Failing probe.
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x4d0-0x4d1 on isa0
unknown: <16550A-compatible COM port> failed to probe on isa0
ppc1: parallel port not found.
unknown: <ECP parallel printer port> failed to probe on isa0
unknown: <IBM3780> can't assign resources (irq)
unknown: <IBM3780> at irq 12 on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x1f0-0x1f7 on isa0
unknown: <PNP0e03> failed to probe on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 313081628 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
GEOM: create disk ad0 dp=0xc3477a60
ad0: <IBM-DJSA-220/JS4IAC1A> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 41344 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:39070017
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 20003848704 end 20003880959
GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s1b, start 268435456 length 510435328 end 778870783
GEOM: Configure ad0s1c, start 0 length 20003848704 end 20003848703
GEOM: Configure ad0s1d, start 778870784 length 268435456 end 1047306239
GEOM: Configure ad0s1e, start 1047306240 length 268435456 end 1315741695
GEOM: Configure ad0s1f, start 1315741696 length 18688107008 end 20003848703
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
tun0: bpf attached
splash: image decoder found: green_saver
module_register: module if_tun already exists!
Module if_tun failed to register: 17
can't re-use a leaf (if_tun_debug)!
-------------- next part --------------
hw.acpi.supported_sleep_state: S1 S3 S4 S5 
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: S1
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 5
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.disable_on_poweroff: 1
hw.acpi.reset_video: 1
hw.acpi.cpu.max_speed: 8
hw.acpi.cpu.current_speed: 8
hw.acpi.cpu.performance_speed: 8
hw.acpi.cpu.economy_speed: 4
hw.acpi.cpu.cx_supported: C1/0 C2/1 C3/65
hw.acpi.cpu.cx_lowest: 0
hw.acpi.cpu.cx_history: 36450/0 0/0 0/0
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 30
hw.acpi.thermal.tz0.temperature: 3192
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 3672
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 3732
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.battery.life: 96
hw.acpi.battery.time: -1
hw.acpi.battery.state: 0
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
hw.acpi.acline: 1


More information about the freebsd-acpi mailing list