S3 experience on Thinkpad 570E
Andrea Campi
andrea+acpi at webcom.it
Thu Dec 23 06:50:59 PST 2004
Hi,
I've tried using S3 on -CURRENT, more in response to Nate's request than
out of need, since S4BIOS is working great on this PC.
In a nutshell, acpiconf -s3 powers down; on powerup however the machine
is deadly slow. I replicated this with a stripped down kernel; the only
thing that was evidently wrong is that the clock slowed down from 1000 to
around 250 interrupts per second.
I'm attaching dmesg and other logs. Anything more?
Bye,
Andrea
Enter S3:
acpi_tz0: switched from _AC0 to NONE: 60.8C
acpi_lid0: wake_prep enabled for \\_SB_.LID_ (S3)
acpi_button0: wake_prep enabled for \\_SB_.SLPB (S3)
unknown: wake_prep disabled wake for \\_SB_.PCI_.USB_ (S3)
======== acpi_printcpu() debug dump ========
gdt[0077:c06cfde0] idt[07ff:c06d01a0] ldt[0030] tr[0020] efl[00000046]
eax[00000000] ebx[c0fd4a80] ecx[00000001] edx[00000004]
esi[00000003] edi[00000000] ebp[ca1c8c1c] esp[ca1c8bec]
cr0[8005003b] cr2[0804a2e8] cr3[0bb69000] cr4[00000691]
cs[0008] ds[0010] es[0010] fs[0018] gs[008f] ss[0010]
======== acpi_printcpu() debug dump ========
gdt[0077:c06cfde0] idt[07ff:c06d01a0] ldt[0030] tr[0020] efl[00000002]
eax[00000001] ebx[c0fd4a80] ecx[00000001] edx[00000000]
esi[00000003] edi[00000000] ebp[ca1c8c1c] esp[ca1c8bec]
cr0[8005003b] cr2[0804a2e8] cr3[0bb69000] cr4[00000691]
cs[0008] ds[0010] es[0010] fs[0018] gs[008f] ss[0010]
acpi_lid0: run_prep cleaned up for \\_SB_.LID_
acpi_button0: run_prep cleaned up for \\_SB_.SLPB
pci0:7:0: Transition from D3 to D0
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
ad0: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: resetting done ..
ad0: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ad0: setting PIO4 on Intel PIIX4 chip
ad0: setting UDMA33 on Intel PIIX4 chip
ata0: device config done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ad2: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata1: resetting done ..
ad2: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ad2: setting PIO4 on Intel PIIX4 chip
ad2: setting UDMA33 on Intel PIIX4 chip
ata1: device config done ..
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x54ab (2)
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #0: Thu Dec 23 10:16:49 CET 2004
andrea at brian:/usr/src/sys/i386/compile/MINIMAL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc074c000.
Calibrating clock(s) ... i8254 clock: 1193173 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 448054924 Hz
CPU: Intel Pentium III (448.05-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 201261056 (191 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000825000 - 0x000000000bc5ffff, 188985344 bytes (46139 pages)
avail memory = 191713280 (182 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6da0
bios32: Entry = 0xfd840 (c00fd840) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd7d0+0x19f
pnpbios: Found PnP BIOS data at 0xc00f6d20
pnpbios: Entry = f0000:9173 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
VESA: information block
56 45 53 41 00 02 20 01 00 01 00 00 00 00 22 00
00 01 27 00 0f 01 00 01 00 01 09 01 00 01 1b 01
00 01 00 01 01 01 02 01 03 01 04 01 05 01 07 01
08 01 0d 01 0e 01 10 01 11 01 12 01 13 01 14 01
VESA: 25 mode(s) found
VESA: v2.0, 2496k memory, flags:0x0, mode table:0xc06d2462 (1000022)
VESA: MagicMedia 256AV 48K
VESA: NeoMagic MagicMedia 256AV 01.0
acpi0: <PTLTD RSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Found $PIR table, 10 entries at 0xc00fdef0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 7 9 10 11 15
embedded 0 2 B 0x61 3 4 5 7 9 10 11 15
embedded 0 6 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 6 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 6 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 6 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 5 A 0x60 3 4 5 7 9 10 11 15
embedded 0 7 A 0x62 3 4 5 7 9 10 11 15
embedded 0 7 B 0x63 3 4 5 7 9 10 11 15
embedded 0 4 A 0x62 3 4 5 7 9 10 11 15
embedded 0 4 B 0x63 3 4 5 7 9 10 11 15
embedded 0 4 C 0x60 none
embedded 0 4 D 0x61 none
embedded 8 0 A 0x62 3 4 5 7 9 10 11 15
embedded 8 1 A 0x62 3 4 5 7 9 10 11 15
AcpiOsDerivePciId: bus 0 dev 2 func 0
AcpiOsDerivePciId: bus 0 dev 2 func 1
AcpiOsDerivePciId: bus 0 dev 6 func 0
AcpiOsDerivePciId: bus 0 dev 6 func 1
AcpiOsDerivePciId: bus 0 dev 6 func 0
acpi0: Power Button (fixed)
atpic: Programming IRQ9 as level/low
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 6 func 3
ACPI timer: 0/4 0/4 0/4 0/4 0/4 0/4 0/4 0/4 0/4 0/4 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 15
pci_link1: <ACPI PCI Link LNKB> irq 7 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 7 9 10 11 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 7 9 10 11 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 15
pci_link2: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 7 9 10 11 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 15
pci_link3: <ACPI PCI Link LNKC> irq 5 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 7 9 10 11 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 7 9 10 11 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 7 9 10 11 15
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0xa210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x001f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 50000000, size 12, enabled
found-> vendor=0x104c, dev=0xac1b, revid=0x03
bus=0, slot=2, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 50100000, size 12, enabled
found-> vendor=0x104c, dev=0xac1b, revid=0x03
bus=0, slot=2, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x07 (1750 ns)
intpin=b, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f4100000, size 12, enabled
map[14]: type 1, range 32, base f4000000, size 20, enabled
pcib0: matched entry for 0.5.INTA (src \\_SB_.PCI_.ISA_.LNKA:0)
pcib0: slot 5 INTA routed to irq 11 via \\_SB_.PCI_.ISA_.LNKA
found-> vendor=0x1013, dev=0x6003, revid=0x01
bus=0, slot=5, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=6, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001800, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=6, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001820, size 5, enabled
pcib0: matched entry for 0.6.INTD (src \\_SB_.PCI_.ISA_.LNKD:0)
pcib0: slot 6 INTD routed to irq 11 via \\_SB_.PCI_.ISA_.LNKD
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=6, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[90]: type 4, range 32, base 00001040, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x03
bus=0, slot=6, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:7:0: Transition from D3 to D0
map[10]: type 1, range 32, base f4101000, size 8, enabled
map[14]: type 4, range 32, base 00001810, size 3, enabled
map[18]: type 4, range 32, base 00002000, size 8, enabled
pcib0: matched entry for 0.7.INTA (src \\_SB_.PCI_.ISA_.LNKC:0)
pcib0: slot 7 INTA routed to irq 5 via \\_SB_.PCI_.ISA_.LNKC
found-> vendor=0x11c1, dev=0x0448, revid=0x01
bus=0, slot=7, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x8290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns)
intpin=a, irq=5
powerspec 2 supports D0 D2 D3 current D0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf4200000-0xf47fffff
pcib1: prefetched decode 0xf5000000-0xf5ffffff
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI_.AGP_ - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base f5000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xf5000000-0xf5ffffff
map[14]: type 1, range 32, base f4400000, size 22, enabled
pcib1: device (null) requested decoded memory range 0xf4400000-0xf47fffff
map[18]: type 1, range 32, base f4200000, size 20, enabled
pcib1: device (null) requested decoded memory range 0xf4200000-0xf42fffff
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI_.ISA_.LNKA:0)
pcib0: slot 1 INTA routed to irq 11 via \\_SB_.PCI_.ISA_.LNKA
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=0x10c8, dev=0x0005, revid=0x20
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0207, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
acpi_video0: <ACPI video extension> mem 0xf4200000-0xf42fffff,0xf4400000-0xf47fffff,0xf5000000-0xf5ffffff irq 11 at device 0.0 on pci1
found CRT monitor(100), detectable by BIOS, head #0
found LCD panel(110), detectable by BIOS, head #0
pci0: <bridge, PCI-CardBus> at device 2.0 (no driver attached)
pci0: <bridge, PCI-CardBus> at device 2.1 (no driver attached)
pci0: <multimedia, audio> at device 5.0 (no driver attached)
pci0:5:0: Transition from D0 to D3
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 6.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1800-0x180f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 6.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1800
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 6.2 (no driver attached)
pci0:6:2: Transition from D0 to D3
pci0: <bridge, PCI-unknown> at device 6.3 (no driver attached)
pci0:6:3: Transition from D0 to D3
pci0: <simple comms> at device 7.0 (no driver attached)
pci0:7:0: Transition from D0 to D3
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
atkbdc: atkbdc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xe8000-0xeffff,0xc0000-0xcbfff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0 failed to probe at port 0x3f8 irq 4 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 448054924 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
acpi_tz0: _AC0: temperature 74.8 >= setpoint 65.0
acpi_tz0: switched from NONE to _AC0: 74.8C
ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ad0: <IBM-DARA-206000/AR2IA52A> ATA-4 disk at ata0-master
ad0: 5729MB (11733120 sectors), 12416 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
ata1-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ata1-master: setting PIO4 on Intel PIIX4 chip
ata1-master: setting UDMA33 on Intel PIIX4 chip
ad2: <IBM-DJSA-220/JS4OAC3A> ATA-5 disk at ata1-master
ad2: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad2
Trying to mount root from ufs:/dev/ad2s1a
start_init: trying /sbin/init
--
Where do you think you're going today?
More information about the freebsd-acpi
mailing list