cvs commit: src/sys/dev/hme if_hme.c

Pyun YongHyeon yongari at FreeBSD.org
Wed Feb 2 00:35:12 PST 2005


yongari     2005-02-02 08:35:11 UTC

  FreeBSD src repository

  Modified files:
    sys/dev/hme          if_hme.c 
  Log:
  Fix "Duplicate mbuf free panic".
  The cause of "Duplicate mbuf free panic" is in the programming
  error of hme_load_txmbuf(). The code path of the panic is the
  following.
  
  1. Due to unknown reason DMA engine was freezed. So TX descritors
     of HME become full and the last failed attempt to transmit a
     packet had set its associated mbuf address to hme_txdesc
     structure. Also the failed packet is requeued into interface
     queue structure in order to retrasmit it when there are more
     available TX descritors.
  
  2. Since DMA engine was freezed, if_timer starts to decrement its
     counter. When if_timer expires it tries to reset HME. During
     the reset phase, hme_meminit() is called and it frees all
     associated mbuf with descriptors. The last failed mbuf is also
     freed here.
  
  3. After HME reset completed, HME starts to retransmit packets
     by dequeing the first packet in interface queue.(Note! the
     packet was already freed in hme_meminit()!)
  
  4. When a TX completion interrupt is posted by the HME, driver
     tries to free the successfylly transmitted mbuf. Since the
     mbuf was freed in step2, now we get "Duplicate mbuf free panic".
  
  However, the real cause is in DMA engine freeze. Since no fatal
  errors reported via interrupts, there might be other cause of
  the freeze. I tried hard to understand the cause of DMA engine
  freeze but couldn't find any clues. It seems that the freeze
  happens under very high network loads(e.g. 7.5-8.0 MB/s TX speed).
  
  Though this fix is not enough to eliminate DMA engine freeze it's
  better than panic.
  
  Reported by:    jhb via sparc64 ML
  
  Revision  Changes    Path
  1.35      +1 -1      src/sys/dev/hme/if_hme.c


More information about the cvs-src mailing list