cvs commit: src/sys/dev/aic7xxx ahc_pci.c ahd_pci.c src/sys/dev/ath if_ath_pci.c src/sys/dev/firewire fwohci_pci.c src/sys/dev/fxp if_fxp.c src/sys/dev/puc puc_pci.c src/sys/dev/re if_re.c src/sys/dev/sio sio_pci.c src/sys/dev/uart uart_bus_pci.c ...

[Don Lewis]

On 28 Nov, Gordon Tetlow wrote:
> On Fri, Nov 28, 2003 at 11:23:56AM +0100, Andreas Klemm wrote:
>> 
>> This reminds me about one problem with my DELL Latitude D600
>> notebook that is still unsolved in -current of 1-2 weeks ago.
>> 
>> Maybe your commit is related to that problem ... I'll test ...
>> 
>> The internal broadcom 10/100/1000 works fine, no problem.
>> 
>> But .. if I add a 2nd Ethernet cardbus PCMCIA card and boot the
>> device or - if I remember right - simply plug in the 3COM card
>> into the PCMCIA slot, then PHY won't be found for the bge0
>> interface anymore...
> 
> I had a similar problem with my IBM T40 laptop. It turned out that
> the cardbus and ethernet controllers were trying to grab the same
> region in memory. Try a boot -v and see if cbb and bge are trying
> to grab the same region in memory.

I had a similar problem with cbb and the internal WiFi card in my IBM
R40.  It would hang on boot when the FreeBSD told one of them to power
down and both saw the command.