cvs commit: src/sys/dev/usb if_axe.c if_axereg.h

[Bill Paul]

wpaul       2003/06/15 14:45:43 PDT

  FreeBSD src repository

  Modified files:
    sys/dev/usb          if_axe.c if_axereg.h 
  Log:
  In the device attach routine, don't depend on uaa->iface being
  populated. Apparently, if you use an ehci controller, it's not.
  Use usbd_device2interface_handle() to retrieve the interface handle.
  NOTE: uaa->iface is populated in the probe routine, so I suspect the
  fact that it's NULL in the attach routine is a bug in the ehci driver.
  
  Also, don't depend on the PHY addresses returned by the AXE_CMD_READ_PHYID
  command. The address is correct for my LinkSys NIC, but a user has
  reported that with a D-Link NIC, the PHYID command returns address 4
  while the attached Broadcom PHY is in fact strapped for address 0.
  Instead, latch onto the first PHY address that returns valid data
  during a readreg operation.
  
  Revision  Changes    Path
  1.4       +23 -4     src/sys/dev/usb/if_axe.c
  1.2       +1 -0      src/sys/dev/usb/if_axereg.h