cvs commit: ports/devel Makefile ports/devel/openocd Makefile distinfo pkg-descr pkg-message pkg-plist ports/devel/openocd/files patch-openocd.c

[Dmitry Marakasov]

amdmi3      2009-06-02 00:23:42 UTC

  FreeBSD ports repository

  Modified files:
    devel                Makefile 
  Added files:
    devel/openocd        Makefile distinfo pkg-descr pkg-message 
                         pkg-plist 
    devel/openocd/files  patch-openocd.c 
  Log:
  The Open On-Chip Debugger (OpenOCD) aims to provide debugging, in-system
  programming and boundary-scan testing for embedded target devices. OpenOCD uses
  a "hardware interface dongle" to communicate with the JTAG (IEEE 1149.1)
  compliant taps on your target board. OpenOCD currently supports many types
  of hardware dongles: USB based, parallel port based, and other standalone boxes
  that run OpenOCD internally. It allows ARM7 (ARM7TDMI and ARM720t),
  ARM9 (ARM920T, ARM922T, ARM926EJ-S, ARM966E-S), XScale (PXA25x, IXP42x) and
  Cortex-M3 (Luminary Stellaris LM3 and ST STM32) based cores to be debugged
  via the GDB protocol. Flash writing is supported for external CFI compatible
  NOR flashes (Intel and AMD/Spansion command set) and several internal flashes
  (LPC2000, AT91SAM7, STR7x, STR9x, LM3, and STM32x). Preliminary support for
  various NAND flash controllers (LPC3180, Orion, S3C24xx, more) controller is
  included.
  
  WWW: http://openocd.berlios.de/
  
  PR:             135094
  Submitted by:   CeDeROM <tomek.cedro at gmail.com>
  
  Revision  Changes    Path
  1.3508    +1 -0      ports/devel/Makefile
  1.1       +174 -0    ports/devel/openocd/Makefile (new)
  1.1       +3 -0      ports/devel/openocd/distinfo (new)
  1.1       +16 -0     ports/devel/openocd/files/patch-openocd.c (new)
  1.1       +15 -0     ports/devel/openocd/pkg-descr (new)
  1.1       +15 -0     ports/devel/openocd/pkg-message (new)
  1.1       +129 -0    ports/devel/openocd/pkg-plist (new)