cvs commit: src/share/man/man4 re.4 src/sys/dev/re if_re.c
src/sys/dev/mii rgephy.c src/sys/pci if_rlreg.h
wpaul at FreeBSD.org
Mon Jun 26 21:05:47 UTC 2006
wpaul 2006-06-26 20:31:32 UTC
FreeBSD src repository
Add support for the RealTek 8169SC/8110SC and RTL8101E devices. The
latter is a PCIe 10/100 chip.
Finally fix the EEPROM reading code so that we can access the EEPROMs on all
devices. In order to access the EEPROM, we must select 'EEPROM programming'
mode, and then set the EEPROM chip select bit. Previously, we were setting
both bits simultaneously, which doesn't work: they must be set in the
Always obtain the station address from the EEPROM, now that EEPROM
reading works correctly.
Make the TX interrupt moderation code based on the internal timer
optional and turned off by default.
Make the re_diag() routine conditional and off by default. When it is
on, only use it for the original 8169, which was the only device that
that really needed it.
Modify interrupt handling to use a fast interrupt handler and fast
Correct the rgephy driver so that it only applies the DSP fixup for
PHY revs 0 and 1. Later chips are fixed and don't need the fixup.
Make the rgephy driver advertise both 1000_FD and 1000_HD bits in
autoneg mode. A couple of the devices don't autoneg correctly unless
configured this way.
Revision Changes Path
1.18 +8 -7 src/share/man/man4/re.4
1.9 +18 -8 src/sys/dev/mii/rgephy.c
1.68 +253 -138 src/sys/dev/re/if_re.c
1.57 +68 -17 src/sys/pci/if_rlreg.h
More information about the cvs-all