cvs commit: src/sys/dev/ata ata-chipset.c ata-lowlevel.c ata-pci.h

[Søren Schmidt]

Martin Nilsson wrote:
> Søren Schmidt wrote:
>> sos         2006-07-04 20:36:03 UTC
>>
>>   FreeBSD src repository
>>
>>   Modified files:
>>     sys/dev/ata          ata-chipset.c ata-lowlevel.c ata-pci.h   Log:
>>   Add preliminary support for the Serverworks HT1000 chip.
>
> Thanks for working on this!
>
You're welcome!

<obvious plot>
If I get the HW on my lab table I'll get it supported :)
</obvious plot>
> I tested with a Supermicro H8SSL-R10 board and MMIO mode now works.
> I can't figure out how to make the stupid BIOS use a single non-RAID 
> boot drive in RAID mode, so I can't test that without digging up an 
> ATA drive with a fresh current. The intel MatrixRAID have no problem 
> with this!
Hmm, I have a H8SSL-i R1.0 that this was done on, and it has no RAID 
(that I'm aware of) on the SATA channels.
However in the BIOS menu where I can select IDE/MMIO mode I can also 
select which SATA drive to boot from...
What type of RAID does your model have ?

-Søren