<P>Hello,</P>
<P>I recently installed an Adaptec 19160 scsi card in a machine running red hat 2.2(20) kernel. I configured the kernel to use the aic7xxx which from my reading will accomodate the 19160 just nicely. Running "modprobe ai7xxx" would give an error "Unresolved symbol memcopy." I imagined I had done something wrong building my drivers, so I did a clean remake of the modules but still the same error message. After many hours I decided to just update the kernel to 2.4(18). Now when I try to run "modprobe aic7xxx" I get the error:</P>
<P> modprobe aic7xxx<BR>/lib/modules/2.4.18a/kernel/drivers/scsi/aic7xxx/aic7xxx.o: init_module: No such<BR> device<BR>Hint: insmod errors can be caused by incorrect module parameters, including inva<BR>lid IO or IRQ parameters</P>
<P>I have the following alias in my /etc/modules.conf"</P>
<P>alias scsi_hostadapter aic7xxx</P>
<P>and I verified the existence of aic7xxx.o under the /lib/modules/2.4.18</P>
<P>All I am trying to do is install a scsi tape drive and so far this has taken 6 days and I still don't have this scsi card working. I am at my wits end, can someon help me out or point me in the right direction as to how to resolve this problem. I appreciate any feedback. Thanks</P>
<P>kk</P>
<P> </P>
<P> </P>
<P> </P>
<P> </P><p><br><hr size=1><b>Do You Yahoo!?</b><br>
<a href="http://rd.yahoo.com/welcome/*http://fifaworldcup.yahoo.com/fc/en/spl">Sign-up for Video Highlights</a> of 2002 FIFA World Cup