HTTP/1.0 200 OK
Server: Netscape-Enterprise/2.0a
Date: Fri, 09 Jan 1998 19:34:05 GMT
Content-type: text/html
<!-- Thank You For Viewing Our Code -->
<!-- Copyright 1997, Exabyte Corporation. All rights reserved. -->
<!-- 1685 38th Street, Boulder, Colorado 80301, U.S.A. -->
<!-- Rev 001; 11/13/95; Lynda Edgington/Jolie Gallagher -->
<!------------------------------------------------------------------------->
<html>
<head>
<title>Exabyte EXB-8200 Level 2 MX Card DIP Switch Definitions</title>
</head>
<body bgcolor="#FFFFFF" text="#000000" link="#000080" alink="#FF0000" vlink="#FF
0000">
<body>
<p><img src="/graphics/banners/suppserv.gif">
<p><br>
<h1>EXB-8200 Level 2 MX Card DIP Switch Definitions</h1>
The following table shows the DIP switch definitions for the EXB-8200 Level 2 MX
card (724022). These switches select the default options used by the software
each time the EXB-8200 is powered on.<p>
<Table Border Width="65%" CellSpacing=0 CellPadding=4>
<tr><th><b>Switch</b>
<th><b>Off position (0)<br>(Default setting)</b>
<th><b>On position (1)</b>
<tr><td><center>1</center>
<td>Run memory test during power-on reset (65 seconds)
<td>Bypass memory test during power-on reset (8 seconds)
<tr><td><center>2</center>
<td>Parity checking disabled
<td>Parity checking enabled
<tr><td><center>3</center>
<td>Odd or even byte disconnect (4-byte boundary on even byte disconnect)
<td>Even byte disconnect
<tr><td><center>4</center>
<td>Report busy status
<td>No busy enable
<tr><td><center>5</center>
<td>Fixed block mode
<td>Variable block mode
<tr><td><center>6</center>
<td>Normal data operations
<td>No disconnect during data transfer
<tr><td><center>7</center>
<td>(reserved)
<td>(reserved)
<tr><td><center>8</center>
<td>15m or 54m length EXATAPE data cartridge expected (P6 cartridge type)*
<td>Unknown tape length expected<br>(PI cartridge type)*
</Table>
<p>
<font size=-1>
* If you use 112m EXATAPE data cartridges, it does not matter how switch 8 is se
t. The tape drive
<br>
must be told to expect a 112m cartridge through the MODE SELECT command. The MOD
E SELECT
<br>
command overrides the power-on setting defined by the DIP switch. For more infor
mation, see the <br><i>EXB-8200 User's Manual </i>(510006), available from <a hr
ef="/contact/main.html#express">Exabyte</a>.</font><p>
<p>
<hr>
<font size="-1">Rev 001; 11/95</font>
</body>
<center>
<img src="/graphics/navigate/exalogo.gif">
<br>
<font size="-1">
<a href="/whatsnew/" target="home">What's New</a> |
<a href="/home/search/" target="home">Search</a> |
<a href="/contact/" target="home">Contact</a> |
<a href="/" target="_top">Home</a>
</font>
<br>
<font size="-2">
© <a href="/misc/copyrt.html">Copyright</a> 1997 Exabyte Corporation,
1685 38th Street, Boulder, Colorado 80301, U.S.A., All rights reserved.
</font>
</center>
<p>
</body>
</html>