AHA-2742Twin Channel conversion with Linux 2.2.14
Ulrich Stoecker
ustoecker at iname.com
Fri May 12 15:00:57 PDT 2000
Hi, AIC7xxx specialists,
I have some trouble with my AHA-2742T EISA controller since I tried to add
an external hd (on scsi channel A, external connector) in addition to the
internal one (channel B).
In the BIOS setup channel B is marked to be the primary channel.
However, the external channel (A) allways becomes scsi0 and the first
external disk therefore /dev/sda. Despite of the BIOS setup the internal
disc becomes /dev/sdb on scsi1.
I would like to link the internal scsi-bus to scsi0 and consequently the
first internal disk to /dev/sda.
I tried the option "reverse_scan" but it had no effect on the twin channel
board.
I'm using Linux 2.2.14 with the aic7xxx driver version 5.1.21 /3.2.4
compiled into the kernel.
Thanks in advance for any hint.
Ulrich
---
Ulrich Stoecker ustoecker at iname.com
Bad Mergentheim / Germany RSA-Key: 0xE806C42D
To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
More information about the aic7xxx
mailing list