2940UW with pre10
Doug Ledford
dledford at dialnet.net
Fri Sep 18 23:56:32 PDT 1998
Shozo UEHARA wrote:
>
> We have a Dual PPro machine with two 2940UW PCI SCSI interfaces and
> an internal narrow scsi disk and an external wide scsi disk are
> connected to both of the interfaces. (4 disks in total)
>
> Kernel is 2.0.35.
>
> The machine has been used as a web server and with aic7xxx-5.1.0-pre7
> patch, it was running for more than a week without rebooting.
> (It sometimes hang with first few versions of 5.1.0-pre patches for
> 2.0.35.)
>
> Today I applied aic7xxx-5.1.0-pre10 patch.
>
> It's started and had been runnnig for a few hours.
> But it suddenly was down. This happened two times today.
>
> Access rate of Web is as usual.
>
> It might be something wrong with the current patch.
> (I'm going to downgrade to pre7.)
Although it may not affect your system, I found what I think was a
termination bug for certain controllers and the pre10 driver. When pre11 is
released, see if it doesn't fix this problem for you.
--
Doug Ledford <dledford at dialnet.net>
Opinions expressed are my own, but
they should be everybody's.
To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe freebsd-aic7xxx" in the body of the message
More information about the aic7xxx
mailing list