I've two integrated SCSI AIC-7880 on matheboard
vlad at itk.ru
vlad at itk.ru
Tue Nov 10 07:36:15 PST 1998
Help me please!!!!
I have HP NetServer LXe Pro with two integrated SCSI AIC-7880 on matheboard and several
scsi drives. There are SCSI-3 two drives (4 GB), one SCSI-2 drive (9 GB) and
SCSI CD-ROM. On first time when i boot, Linux find all my drives,
on second time SCSI-2 or CD-ROM not found.
----------------------------------------------------------------------------
dmesg:
in sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 2.0.35 (root at debian) (gcc version 2.7.2.3) #4 Fri Oct 23 21:07:22 GMT 1998
Starting kswapd v 1.4.2.2
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
loop: registered device at major 7
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 82078.
(scsi0) <Adaptec AIC-7880 Ultra SCSI host adapter> found at PCI 11/0
(scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi0) BIOS disabled, IO Port 0xec00, IRQ 11
(scsi0) IO Memory at 0xfe1ff000, MMAP Memory at 0x4805000
(scsi0) Downloading sequencer code... 413 instructions downloaded
(scsi1) <Adaptec AIC-7880 Ultra SCSI host adapter> found at PCI 12/0
(scsi1) Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi1) BIOS disabled, IO Port 0xe800, IRQ 15
(scsi1) IO Memory at 0xfe1fe000, MMAP Memory at 0x4807000
(scsi1) Downloading sequencer code... 413 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.0.19/3.2.4
<Adaptec AIC-7880 Ultra SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.0.19/3.2.4
<Adaptec AIC-7880 Ultra SCSI host adapter>
scsi : 2 hosts.
(scsi0:0:-1:-1) Scanning channel for devices.
(scsi0:-1:-1:-1) Allocating initial 30 SCB structures.
Vendor: HP Model: 4.26GB B 68-0854 Rev: 0854
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: HP Model: 4.26GB B 68-0854 Rev: 0854
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
(scsi1:0:-1:-1) Scanning channel for devices.
(scsi1:-1:-1:-1) Allocating initial 30 SCB structures.
(scsi0:-1:-1:-1) Bad scbptr 255 during SELTO.
(scsi0:-1:-1:-1) Referenced SCB 255 not valid during SELTO.
SCSISEQ = 0x12 SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Vendor: HP Model: 9.10GB A 80-5151 Rev: 5151
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdc at scsi1, channel 0, id 1, lun 0
Vendor: TOSHIBA Model: CD-ROM XM-5701TA Rev: 0787
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi1, channel 0, id 5, lun 0
scsi : detected 1 SCSI cdrom 3 SCSI disks total.
(scsi0:0:0:0) Using wide (16 bit) transfers.
(scsi0:0:0:0) Synchronous at 20.0MHz, offset 8.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8330543 [4067 MB] [4.1 GB]
(scsi0:0:1:0) Using wide (16 bit) transfers.
(scsi0:0:1:0) Synchronous at 20.0MHz, offset 8.
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8330543 [4067 MB] [4.1 GB]
(scsi1:0:1:0) Synchronous at 10.0MHz, offset 8.
(scsi1:0:1:0) Using wide (16 bit) transfers.
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 17773524 [8678 MB] [8.7 GB]
----------------------------------------------------------------------------
/proc/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: HP Model: 4.26GB B 68-0854 Rev: 0854
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: HP Model: 4.26GB B 68-0854 Rev: 0854
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: HP Model: 9.10GB A 80-5151 Rev: 5151
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 05 Lun: 00
Vendor: TOSHIBA Model: CD-ROM XM-5701TA Rev: 0787
Type: CD-ROM ANSI SCSI revision: 02
----------------------------------------------------------------------------
/proc/scsi/aic7xxx/0
Adaptec AIC7xxx driver version: 5.0.19/3.2.4
Compile Options:
AIC7XXX_RESET_DELAY : 5
AIC7XXX_TAGGED_QUEUEING: Adapter Support Enabled
Check below to see which
devices use tagged queueing
AIC7XXX_PAGE_ENABLE : Enabled (This is no longer an option)
AIC7XXX_PROC_STATS : Enabled
Adapter Configuration:
SCSI Adapter: Adaptec AIC-7880 Ultra SCSI host adapter
Ultra Wide Controller
PCI MMAPed I/O Base: 0xfe1ff000
Adaptec SCSI BIOS: Disabled
IRQ: 11
SCBs: Active 0, Max Active 2,
Allocated 30, HW 16, Page 255
Interrupts: 3518
BIOS Control Word: 0x0000
Adapter Control Word: 0x0000
Extended Translation: Disabled
Disconnect Enable Flags: 0xffff
Ultra Enable Flags: 0x0003
Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 8
Tagged Queue By Device array for aic7xxx host instance 0:
{255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
Actual queue depth per device for aic7xxx host instance 0:
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
Statistics:
(scsi0:0:0:0)
nxfers 2447 (2171 read;276 written)
blks(512) rd=11973; blks(512) wr=828
< 512 512-1K 1-2K 2-4K 4-8K 8-16K 16-32K 32-64K 64-128K >128K
Reads: 0 1 1434 61 340 329 1 4 1 0
Writes: 0 0 203 57 14 2 0 0 0 0
(scsi0:0:1:0)
nxfers 990 (989 read;1 written)
blks(512) rd=2101; blks(512) wr=2
< 512 512-1K 1-2K 2-4K 4-8K 8-16K 16-32K 32-64K 64-128K >128K
Reads: 0 1 986 0 1 0 0 1 0 0
Writes: 0 0 1 0 0 0 0 0 0 0
----------------------------------------------------------------------------
/proc/scsi/aic7xxx/1
Adaptec AIC7xxx driver version: 5.0.19/3.2.4
Compile Options:
AIC7XXX_RESET_DELAY : 5
AIC7XXX_TAGGED_QUEUEING: Adapter Support Enabled
Check below to see which
devices use tagged queueing
AIC7XXX_PAGE_ENABLE : Enabled (This is no longer an option)
AIC7XXX_PROC_STATS : Enabled
Adapter Configuration:
SCSI Adapter: Adaptec AIC-7880 Ultra SCSI host adapter
Ultra Wide Controller
PCI MMAPed I/O Base: 0xfe1fe000
Adaptec SCSI BIOS: Disabled
IRQ: 15
SCBs: Active 0, Max Active 1,
Allocated 30, HW 16, Page 255
Interrupts: 2244
BIOS Control Word: 0x0000
Adapter Control Word: 0x0000
Extended Translation: Disabled
Disconnect Enable Flags: 0xffff
Ultra Enable Flags: 0x0002
Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 8
Tagged Queue By Device array for aic7xxx host instance 1:
{255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
Actual queue depth per device for aic7xxx host instance 1:
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
Statistics:
(scsi1:0:1:0)
nxfers 2173 (2172 read;1 written)
blks(512) rd=4461; blks(512) wr=2
< 512 512-1K 1-2K 2-4K 4-8K 8-16K 16-32K 32-64K 64-128K >128K
Reads: 0 1 2170 0 0 0 0 1 0 0
Writes: 0 0 1 0 0 0 0 0 0 0
Tnank's!!!!!!!!!!!!
P.S. Sorry for my english
Vladimir V.P. vlad at itk.ru
To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe freebsd-aic7xxx" in the body of the message
More information about the aic7xxx
mailing list