2.0.35 and aic7xxx

[Patrick W. Bryant]

On Mon, 20 Jul 1998, Doug Ledford wrote:

> Robert G. Brown wrote:

> . . . but I think that if you are including the " as part of the line
> you pass to lilo as the system boots, the verbose parameter is getting
> ignored.  

Whoops.  Now I get 

(scsi0) BIOS enabled, IO Port 0xfc00, IRQ 10
(scsi0) IO Memory at 0xf9fff000, MMAP Memory at 0x8809000
(scsi0) Resetting channel
(scsi0) Downloading sequencer code... 407 instructions downloaded
(scsi0:-1:-1:-1) Data Parity Efforo during PCI address or PCI writephase.
(scsi0:-1:-1:-1) Received a PCI Target Abort

then the rest (included below).  Sorry if my oversight caused any
goose-chasing.

-Patrick

	The rest of the data:

aic7xxx driver version 5.1.0pre3
Controller type:
	Adaptec AIC-7890/1 Ultra2 SCSI host adapter
p->flags=0x10804501, p->chip=0x406, p->features=0xf6, sequencer is paused
SIMODE0=0X0, SIMODE1=0Xa4, SSTAT0=0x0, SSTAT1=0x0, INTSTAT=0x0
SCSISIGI=0x0, SXFRCTL0=0x88, SXFRCTL1=0x27, SCSISEQ=0x0, SEQCTL=0x90
SCSIRATE=0x0, SCSIOFFSET=0, SEQADDR=0x1, LASTPHASE=P_MESGIN
QINFIFO: (TAG)
Current SCB: (SCBPTR/TAG/CONTROL) 0/255/0x0
WAITING_SCBS: (SCBPTR/TAG/CONTROL)
DISCONNECTED_SCBS: (SCBPTR/TAG/CONTROL)


   ______________________________ 
   P a t r i c k  W.  B r y a n t

     College of Arts & Sciences   
    Internet Technology Services 


To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message