2.0.35 and aic7xxx

[Patrick W. Bryant]

OK, I've finally had time to add the pre4 patch (kernel 2.0.34) and
recompile.  I'm still getting the same results (re-copied below). I'm not
using "no_reset" nor preventing reset in SCSI bios.  

Here's the output with aic7xxx="verbose:0x1ffff,panic_on_abort": 

(scsi0) Adaptec AIC-7890/1 Ultra2 SCSI host adapter
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 407 instructions downloaded
aic7xxx driver version 5.1.0pre4/2.0.34
Controller type:
	Adaptec AIC-7890/1 Ultra2 SCSI host adapter
p->flags=0x10804501, p->chip=0x406, p->features=0xf6, sequencer is paused
SIMODE0=0X0, SIMODE1=0Xa4, SSTAT0=0x0, SSTAT1=0x0, INTSTAT=0x0
SCSISIGI=0x0, SXFRCTL0=0x88, SXFRCTL1=0x27, SCSISEQ=0x0, SEQCTL=0x90
SCSIRATE=0x0, SCSIOFFSET=0, SEQADDR=0x1, LASTPHASE=P_MESGIN
QINFIFO: (TAG)
Current SCB: (SCBPTR/TAG/CONTROL) 0/255/0x0
WAITING_SCBS: (SCBPTR/TAG/CONTROL)
DISCONNECTED_SCBS: (SCBPTR/TAG/CONTROL)


Yrs.,
Patrick

   ______________________________ 
   P a t r i c k  W.  B r y a n t

     College of Arts & Sciences   
    Internet Technology Services 



  


To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message


   ______________________________ 
   P a t r i c k  W.  B r y a n t

     College of Arts & Sciences   
    Internet Technology Services 



  


To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message