Aic7xxx-5.1.0 pre2 and Ultra2

[Anirudh Modi]

Hi Doug,

	Here is the following output on my machine with your patch for
aic7xxx-5.1.0 pre2. I have a dual processor Dell Precision Workstation
WS410 with 2940U2W controller (complete h/w specs available at URL below): 
	http://support.dell.com/support/system.asp?sysid=wrk_410 
Here is my boot message. The kernel hangs while downloading the sequencer
code. 
--------------------------start------------------------------------------
FDC 0 is a National Semiconductor PC87306
aic7xxx: <Adaptec AIC-7880 Ultra SCSI host adapter> at PCI 14/0
aic7xxx: Initial PCI_COMMAND value was 0x117
aic7xxx: Loading serial EEPROM...done
aic7xxx: SE High byte termination Enabled
aic7xxx: <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> at PCI 10/0
aic7xxx: Initial PCI_COMMAND value was 0x117
aic7xxx: Loading serial EEPROM...done
aic7xxx: EEPROM is not present.
aic7xxx: SE High byte termination Enabled
aic7xxx: LVD Low byte termination Enabled
aic7xxx: LVD High byte termination Enabled
(scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> at PCI 10/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) BIOS enabled, IO Port 0xfc00, IRQ 10
(scsi0) IO Memory at 0xf9fff000, MMAP Memory at 0x0
(scsi0) Resetting channel
(scsi0) Downloading sequencer code...
-------------------------------end-------------------------------------

Hope this helps.
      _______________________________________________________    
     |                                                       |
     |              A N I R U D H    M O D I                 |     
     |       (currently doing M.S. in Aerospace Engg.)       |
     |         Pennsylvania State University (PSU)           |
     |            Phone : +1-814-865-1965  (Off)             | 
     |                  : +1-814-237-4816  (Res)             | 
    /)              FAX : +1-814-865-7092  (Off)             (\
   / )            E-mail : anirudh-modi at psu.edu              ( \
 _( (|       Personal Page : http://bart.aero.psu.edu        |) )_
(((\ \_______________________________________________________/ /)))
(\\\\ \_/ /                                             \ \_/ ////)
 \       /                                               \       /
  \    _/                                                 \_    /
  /   /                                                    \   \


To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message