help with aic7xxx problem...
Frank Koenen
koenfr at lidp.com
Wed Feb 25 12:26:22 PST 1998
Hello Jess Johnson,
Can you help? I'm having problems with my Linux system that is locking
up.
I saw your name referencing FAQ. Can you give me the correct direction
to the answer?
The problem: My Linux (version 2.0.31) server, running on a 233MHz
Pentium-Pro, S1668 Titan Pro ATX mother board, with an
AHA-2940Ultra-Wide SCSI controller, and and a SEAGATE Model ST34371W
4.1G disk... locks up when there is lots of disk I/O ... i.e.: when I
try to compile a custom Linux kernel.
Info you might be looking for:
---------cut-------------cut-------------cut-------------cut-----------
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST34371W Rev: 0338
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: SEAGATE Model: ST12400N Rev: 8650
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: TOSHIBA Model: CD-ROM XM-4101TA Rev: 1184
Type: CD-ROM
---------cut-------------cut-------------cut-------------cut-----------
Adaptec AIC7xxx driver version: 4.1/3.2
Compile Options:
AIC7XXX_RESET_DELAY : 15
AIC7XXX_TAGGED_QUEUEING: Disabled
AIC7XXX_PAGE_ENABLE : Disabled
AIC7XXX_PROC_STATS : Disabled
Adapter Configuration:
SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter
(AIC-788x chipset)
Host Bus: Wide
Base IO: 0x6000
Base IO Memory: 0xe0804000
IRQ: 11
SCBs: Used 2, HW 16, Page 16
Interrupts: 17757
Serial EEPROM: True
Extended Translation: Enabled
SCSI Bus Reset: Enabled
Ultra SCSI: Enabled
Target Disconnect: Enabled
---------cut-------------cut-------------cut-------------cut-----------
I have looked at the latest releases and patches on the WWW. Let me
know if you can help. Thanks.
--
Frank Koenen (koenfr at lidp.com) ,__o ,__o ,__o "If you're not the
LIDP System Administration _-\_<, _-\_<, _-\_<, leader, the view
+1 630 960 0133 x 634 (*)/'(*) (*)/'(*) (*)/'(*) never changes"
To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
More information about the aic7xxx
mailing list