timeout error

[Matthew Harrell]

I'm using the July 27 driver and 2.1.47.  When I tried to do a copy from a
cdrom to a jaz drive (using tar) the system hung with this error:

  scsi : aborting command due to timeout : pid 474 51, scsi0, channel 0, id 4, 
   lun 0 0x08 00 6b 09 01 00 

Anyone have an idea what the problem might be?  When I rebooted into Win95
it was able to do the copy perfectly.

The scsi chain looks like
  Attached devices: 
  Host: scsi0 Channel: 00 Id: 00 Lun: 00
    Vendor: SEAGATE  Model: ST11200N         Rev: 9300
    Type:   Direct-Access                    ANSI SCSI revision: 02
  Host: scsi0 Channel: 00 Id: 01 Lun: 00
    Vendor: SEAGATE  Model: ST32550N         Rev: 0012
    Type:   Direct-Access                    ANSI SCSI revision: 02
  Host: scsi0 Channel: 00 Id: 02 Lun: 00
    Vendor: DEC      Model: RZ26     (C) DEC Rev: T392
    Type:   Direct-Access                    ANSI SCSI revision: 02
  Host: scsi0 Channel: 00 Id: 04 Lun: 00
    Vendor: PLEXTOR  Model: CD-ROM PX-12CS   Rev: 1.01
    Type:   CD-ROM                           ANSI SCSI revision: 02
  Host: scsi0 Channel: 00 Id: 05 Lun: 00
    Vendor: iomega   Model: jaz 1GB          Rev: H.72
    Type:   Direct-Access                    ANSI SCSI revision: 02
  Host: scsi0 Channel: 00 Id: 06 Lun: 00
    Vendor: DEC      Model: TLZ06     (C)DEC Rev: 0435
    Type:   Sequential-Access                ANSI SCSI revision: 02

-- 
  Matthew Harrell                          Life is like a diaper -
  Simulation Technology Division, SAIC      short and loaded.
  mharrell at std.saic.com