problem with nmap

[Jason Hellenthal]

On Fri, Jun 01, 2012 at 07:43:17AM +0300, Andrey S. Rybak wrote:
> Installing libpcap from ports does not help. Error message is same.
> Running nmap with -dd yield next:
> 
> Starting Nmap 6.00 ( http://nmap.org ) at 2012-06-01 05:42 EEST
> Fetchfile found /usr/local/share/nmap/nmap-services
> PORTS: Using top 1000 ports found open (TCP:1000, UDP:0, SCTP:0)
> Fetchfile found /usr/local/share/nmap/nmap.xsl
> The max # of sockets we are using is: 0
> --------------- Timing report ---------------
>    hostgroups: min 1, max 100000
>    rtt-timeouts: init 1000, min 100, max 10000
>    max-scan-delay: TCP 1000, UDP 1000, SCTP 1000
>    parallelism: min 0, max 0
>    max-retries: 10, host-timeout: 0
>    min-rate: 0, max-rate: 0
> ---------------------------------------------
> Read from /usr/local/share/nmap: nmap-services.
> WARNING: No targets were specified, so 0 hosts scanned.
> Nmap done: 0 IP addresses (0 hosts up) scanned in 0.04 seconds
>             Raw packets sent: 0 (0B) | Rcvd: 0 (0B)
> 
> 

Have you also recompiled nmap after you installed libpcap. Sorrry this
should be a neccesary step.

nmap -V -dd

-- 

 - (2^(N-1))