5.4-RC3 Kernel Panic: "vinvalbuf: dirty bufs" (backtrace
included)
Doug White
dwhite at gumbysoft.com
Mon Apr 25 21:16:06 PDT 2005
On Sat, 23 Apr 2005, Viktor Rosendahl wrote:
> Hi,
>
> Last night when I was asleep my FreeBSD workstation suffered a kernel panic
> and did a coredump. The panic occurred at 3.02 AM, that is one minute after
> the start of the daily script (coincidence?).
>
> The only "unusual" thing I have been doing before the panic was that I was
> playing with a 1GB USB Flash memory stick. I found out that in order to
> create a partition on the device, I need to make it slightly smaller than the
> maximum suggested by sysinstall (I used sysinstall to partition the device
> out of pure lazyness). However, I think the panic occurred a couple of hours
> later and the USB media was not mounted at the time (not 100% sure but I
> think so), so I don't think it is related but I can be wrong.
Yanking the stick without unmounting it will cause this type of panic.
Don't do that. :)
> Here is the backtrace that I obtained from kgdb:
>
> #0 doadump () at pcpu.h:159
> #1 0xc05c7a2a in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:410
> #2 0xc05c7d31 in panic (fmt=0xc07fcb12 "vinvalbuf: dirty bufs")
> at /usr/src/sys/kern/kern_shutdown.c:566
> #3 0xc0626032 in vinvalbuf (vp=0xc4ae4210, flags=1, cred=0x0, td=0x0,
> slpflag=0, slptimeo=0) at /usr/src/sys/kern/vfs_subr.c:972
> #4 0xc06298e5 in vclean (vp=0xc4ae4210, flags=8, td=0xc235f480)
> at /usr/src/sys/kern/vfs_subr.c:2478
> #5 0xc062a0ea in vgonel (vp=0xc4ae4210, td=0x0)
> at /usr/src/sys/kern/vfs_subr.c:2697
> #6 0xc0624d83 in vlrureclaim (mp=0xc261a800) at pcpu.h:156
> #7 0xc06250af in vnlru_proc () at /usr/src/sys/kern/vfs_subr.c:598
> #8 0xc05af48a in fork_exit (callout=0xc0624e5d <vnlru_proc>, arg=0x0,
> frame=0x0) at /usr/src/sys/kern/kern_fork.c:790
> #9 0xc0790d0c in fork_trampoline () at /usr/src/sys/i386/i386/exception.s:209
>
>
> And the content of the info file:
>
> Dump header from device /dev/ad4s1b
> Architecture: i386
> Architecture Version: 16777216
> Dump Length: 1073414144B (1023 MB)
> Blocksize: 512
> Dumptime: Sat Apr 23 03:02:10 2005
> Hostname: <hostname removed before posting>
> Magic: FreeBSD Kernel Dump
> Version String: FreeBSD 5.4-RC3 #0: Thu Apr 21 00:11:58 EEST 2005
> <hostname removed before posting>:/usr/obj/usr/src/sys/ATA
> Panic String: vinvalbuf: dirty bufs
> Dump Parity: 3518619234
> Bounds: 21
> Dump Status: good
>
>
> ...and here is the dmesg that I obtained after the machine had rebooted after
> the panic:
>
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.4-RC3 #0: Thu Apr 21 00:11:58 EEST 2005
> <hostname removed before posting>:/usr/obj/usr/src/sys/ATA
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2605.92-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Hyperthreading: 2 logical CPUs
> real memory = 1073414144 (1023 MB)
> avail memory = 1040875520 (992 MB)
> ACPI APIC Table: <A M I OEMAPIC >
> ioapic0: Changing APIC ID to 2
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> acpi0: <A M I OEMRSDT> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0
> on pci0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pci1: <display> at device 0.1 (no driver attached)
> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 16
> at device 29.0 on pci0
> usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 19
> at device 29.1 on pci0
> usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 18
> at device 29.2 on pci0
> usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 16
> at device 29.3 on pci0
> usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
> usb3: USB revision 1.0
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 23 at
> device 29.7 on pci0
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <EHCI (generic) USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff
> irq 22 at device 5.0 on pci2
> skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
> sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
> sk0: Ethernet address: 00:11:d8:52:51:d6
> miibus0: <MII bus> on sk0
> e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
> e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,
> auto
> atapci0: <Promise PDC20269 UDMA133 controller> port
> 0xdf90-0xdf9f,0xdfe0-0xdfe3,0xdfa8-0xdfaf,0xdfe4-0xdfe7,0xdff0-0xdff7 mem
> 0xfeaf8000-0xfeafbfff irq 21 at device 9.0 on pci2
> ata2: channel #0 on atapci0
> ata3: channel #1 on atapci0
> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
> 0xdf00-0xdf3f mem 0xfea80000-0xfea9ffff,0xfeaa0000-0xfeabffff irq 22 at
> device 10.0 on pci2
> em0: Ethernet address: 00:0e:0c:06:21:17
> em0: Speed:N/A Duplex:N/A
> asr0: <Adaptec Caching SCSI RAID> mem 0xe8000000-0xefffffff irq 20 at device
> 12.0 on pci2
> asr0: ADAPTEC 2400A FW Rev. 3A0L, 4 channel, 256 CCBs, Protocol I2O
> pcib3: <PCI-PCI bridge> at device 12.1 on pci2
> pci3: <PCI bus> on pcib3
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci1: <Intel ICH5 UDMA100 controller> port
> 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
> ata0: channel #0 on atapci1
> ata1: channel #1 on atapci1
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pcm0: <Intel ICH5 (82801EB)> port 0xee80-0xeebf,0xe800-0xe8ff mem
> 0xfebff400-0xfebff4ff,0xfebff800-0xfebff9ff irq 17 at device 31.5 on pci0
> pcm0: <Analog Devices AD1985 AC97 Codec>
> acpi_button0: <Power Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on
> acpi0
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> orm0: <ISA Option ROMs> at iomem
> 0xd1000-0xd6fff,0xcf800-0xd0fff,0xcd000-0xcf7ff,0xc0000-0xccfff on isa0
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounter "TSC" frequency 2605920328 Hz quality 800
> Timecounters tick every 10.000 msec
> IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled
> acd0: DVDR <LITE-ON DVDRW SOHW-1633S/BS0R> at ata0-master PIO4
> acd1: DVDROM <DVD-ROM BDV316E/VER 0049> at ata0-slave PIO4
> ad4: 190782MB <WDC WD2000JB-00DUA0/65.13G65> [387621/16/63] at ata2-master
> UDMA100
> ad6: 286103MB <Maxtor 4A300J0/RAMB1TV0> [581290/16/63] at ata3-master UDMA133
> da0 at asr0 bus 0 target 0 lun 0
> da0: <ADAPTEC RAID-5 3A0L> Fixed Direct Access SCSI-2 device
> da0: Tagged Queueing Enabled
> da0: 228957MB (468903936 512 byte sectors: 255H 63S/T 29187C)
> cd0 at ata0 bus 0 target 0 lun 0
> cd0: <LITE-ON DVDRW SOHW-1633S BS0R> Removable CD-ROM SCSI-0 device
> cd0: 16.000MB/s transfers
> cd0: cd present [2133520 x 2048 byte records]
> cd1 at ata0 bus 0 target 1 lun 0
> cd1: <DVD-16X DVD-ROM BDV316E 0049> Removable CD-ROM SCSI-0 device
> cd1: 16.000MB/s transfers
> cd1: cd present [3911061 x 2048 byte records]
> Mounting root from ufs:/dev/ad4s1a
> em0: Link is up 1000 Mbps Full Duplex
> drm0: <ATI Radeon If R250 9000> port 0xc000-0xc0ff mem
> 0xfe8f0000-0xfe8fffff,0xe0000000-0xe3ffffff irq 16 at device 0.0 on pci1
> info: [drm] AGP at 0xf8000000 64MB
> info: [drm] Initialized radeon 1.11.0 20020828 on minor 0
> info: [drm] Loading R200 Microcode
> umass0: BUFFALO ClipDrive, rev 2.00/2.00, addr 2
> da1 at umass-sim0 bus 0 target 0 lun 0
> da1: <BUFFALO ClipDrive 2.00> Removable Direct Access SCSI-2 device
> da1: 40.000MB/s transfers
> da1: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready
> change,
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retries Exhausted
> Opened disk da1 -> 6
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> umass0: at uhub4 port 1 (addr 2) disconnected
> (da1:umass-sim0:0:0:0): lost device
> (da1:umass-sim0:0:0:0): removing device entry
> umass0: detached
> umass0: BUFFALO ClipDrive, rev 2.00/2.00, addr 2
> da1 at umass-sim0 bus 0 target 0 lun 0
> da1: <BUFFALO ClipDrive 2.00> Removable Direct Access SCSI-2 device
> da1: 40.000MB/s transfers
> da1: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready
> change,
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retries Exhausted
> Opened disk da1 -> 6
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da1:umass-sim0:0:0:0): WRITE(10). CDB: 2a 0 0 0 0 21 0 0 8 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): DATA PROTECT asc:27,0
> (da1:umass-sim0:0:0:0): Write protected
> (da1:umass-sim0:0:0:0): Unretryable error
> umass0: at uhub4 port 1 (addr 2) disconnected
> (da1:umass-sim0:0:0:0): lost device
> (da1:umass-sim0:0:0:0): removing device entry
> umass0: detached
> umass0: BUFFALO ClipDrive, rev 2.00/2.00, addr 2
> da1 at umass-sim0 bus 0 target 0 lun 0
> da1: <BUFFALO ClipDrive 2.00> Removable Direct Access SCSI-2 device
> da1: 40.000MB/s transfers
> da1: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready
> change,
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retries Exhausted
> Opened disk da1 -> 6
> (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
> (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> panic: vinvalbuf: dirty bufs
> Uptime: 1d6h1m42s
> Dumping 1023 MB
> 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 256 272 288 304 320 336
> 352 368 384 400 416 432 448 464 480 496 512 528 544 560 576 592 608 624 640
> 656 672 688 704 720 736 752 768 784 800 816 832 848 864 880 896 912 928 944
> 960 976 992 1008Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.4-RC3 #0: Thu Apr 21 00:11:58 EEST 2005
> <hostname removed before posting>:/usr/obj/usr/src/sys/ATA
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2605.92-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Hyperthreading: 2 logical CPUs
> real memory = 1073414144 (1023 MB)
> avail memory = 1040875520 (992 MB)
> ACPI APIC Table: <A M I OEMAPIC >
> ioapic0: Changing APIC ID to 2
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> acpi0: <A M I OEMRSDT> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0
> on pci0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pci1: <display> at device 0.1 (no driver attached)
> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 16
> at device 29.0 on pci0
> usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 19
> at device 29.1 on pci0
> usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 18
> at device 29.2 on pci0
> usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 16
> at device 29.3 on pci0
> usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
> usb3: USB revision 1.0
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 23 at
> device 29.7 on pci0
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <EHCI (generic) USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff
> irq 22 at device 5.0 on pci2
> skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
> sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
> sk0: Ethernet address: 00:11:d8:52:51:d6
> miibus0: <MII bus> on sk0
> e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
> e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,
> auto
> atapci0: <Promise PDC20269 UDMA133 controller> port
> 0xdf90-0xdf9f,0xdfe0-0xdfe3,0xdfa8-0xdfaf,0xdfe4-0xdfe7,0xdff0-0xdff7 mem
> 0xfeaf8000-0xfeafbfff irq 21 at device 9.0 on pci2
> ata2: channel #0 on atapci0
> ata3: channel #1 on atapci0
> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
> 0xdf00-0xdf3f mem 0xfea80000-0xfea9ffff,0xfeaa0000-0xfeabffff irq 22 at
> device 10.0 on pci2
> em0: Ethernet address: 00:0e:0c:06:21:17
> em0: Speed:N/A Duplex:N/A
> asr0: <Adaptec Caching SCSI RAID> mem 0xe8000000-0xefffffff irq 20 at device
> 12.0 on pci2
> asr0: ADAPTEC 2400A FW Rev. 3A0L, 4 channel, 256 CCBs, Protocol I2O
> pcib3: <PCI-PCI bridge> at device 12.1 on pci2
> pci3: <PCI bus> on pcib3
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci1: <Intel ICH5 UDMA100 controller> port
> 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
> ata0: channel #0 on atapci1
> ata1: channel #1 on atapci1
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pcm0: <Intel ICH5 (82801EB)> port 0xee80-0xeebf,0xe800-0xe8ff mem
> 0xfebff400-0xfebff4ff,0xfebff800-0xfebff9ff irq 17 at device 31.5 on pci0
> pcm0: <Analog Devices AD1985 AC97 Codec>
> acpi_button0: <Power Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on
> acpi0
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> orm0: <ISA Option ROMs> at iomem
> 0xd1000-0xd6fff,0xcf800-0xd0fff,0xcd000-0xcf7ff,0xc0000-0xccfff on isa0
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounter "TSC" frequency 2605921612 Hz quality 800
> Timecounters tick every 10.000 msec
> IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled
> acd0: DVDR <LITE-ON DVDRW SOHW-1633S/BS0R> at ata0-master PIO4
> acd1: DVDROM <DVD-ROM BDV316E/VER 0049> at ata0-slave PIO4
> ad4: 190782MB <WDC WD2000JB-00DUA0/65.13G65> [387621/16/63] at ata2-master
> UDMA100
> ad6: 286103MB <Maxtor 4A300J0/RAMB1TV0> [581290/16/63] at ata3-master UDMA133
> da0 at asr0 bus 0 target 0 lun 0
> da0: <ADAPTEC RAID-5 3A0L> Fixed Direct Access SCSI-2 device
> da0: Tagged Queueing Enabled
> da0: 228957MB (468903936 512 byte sectors: 255H 63S/T 29187C)
> cd0 at ata0 bus 0 target 0 lun 0
> cd0: <LITE-ON DVDRW SOHW-1633S BS0R> Removable CD-ROM SCSI-0 device
> cd0: 16.000MB/s transfers
> cd0: cd present [2133520 x 2048 byte records]
> cd1 at ata0 bus 0 target 1 lun 0
> cd1: <DVD-16X DVD-ROM BDV316E 0049> Removable CD-ROM SCSI-0 device
> cd1: 16.000MB/s transfers
> cd1: cd present [3911061 x 2048 byte records]
> Mounting root from ufs:/dev/ad4s1a
> WARNING: / was not properly dismounted
> WARNING: /home was not properly dismounted
> WARNING: /tmp was not properly dismounted
> WARNING: /usr was not properly dismounted
> WARNING: /var was not properly dismounted
> WARNING: /big was not properly dismounted
> em0: Link is up 1000 Mbps Full Duplex
> drm0: <ATI Radeon If R250 9000> port 0xc000-0xc0ff mem
> 0xfe8f0000-0xfe8fffff,0xe0000000-0xe3ffffff irq 16 at device 0.0 on pci1
> info: [drm] AGP at 0xf8000000 64MB
> info: [drm] Initialized radeon 1.11.0 20020828 on minor 0
> info: [drm] Loading R200 Microcode
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>
--
Doug White | FreeBSD: The Power to Serve
dwhite at gumbysoft.com | www.FreeBSD.org
More information about the freebsd-stable
mailing list