HP D325 Panic Fault Trap

[colin williams]

Im trying to boot FreeBSD on a hp d325 minitower. I am getting the
same panic fault crap. I set my settings the same as Chris stated in
the archives but am not having any luck.

Maybe he forget to mention something I'm supposed to set in the bios?



Someone else wrote me already. All you have to do is go into the BIOS

setup: Disable HD DMA Transfers, Disable HD Translation, Switch it to

PIO 0 mode. FreeBSD boots fine, then when the kernel takes over it

programms the ATA controller itself, so no speed loss (little slower


booting, a second or two at most).


~Chris


I have a new HP D325 minitower with an Athlon XP 3000+ processor, 512

RAM, 40GB 7200 HD, CD-RW/DVD-Rom.


If I try to boot a 5.2.1 based CD (Official Install or FreeSBIE) I get

this message:


FreeBSD/i386 Bootstrap loader, Revision 1.1

(root at nathan, Mon Feb 23 15:05:46 CET 2004)

|

int=0000000d   err=00000000   efl=00030246   eip=0000249a

eax=00002025   ebx=00000004   ecx=00002000   edx=0000a654

esi=000008d5   edi=0006290c   ebp=00001516   esp=000014e0

cs=f000   ds=ede1   es=ede1   fs=0000   gs=0000   ss=ede1


cs:eip=0f 20 dd 81 e5 00 f0 0f-20 c2 0f 01 e0 a8 01 75

       08 80 c2 fe e8 53 ff eb-21 0f 20 e0 a9 30 00 75

ss:esp=0c 29 06 00 d5 08 c0 00-16 15 00 00 00 15 00 00

       04 00 00 00 54 a6 00 00-04 00 00 00 25 a6 00 00

BTX Halted