if_ndis + Centrino regression
Lukas Ertl
l.ertl at univie.ac.at
Wed Jan 28 09:37:02 PST 2004
Hi Bill,
there's some regression with if_ndis between a kernel from Jan 26 13:45
CET and a kernel from Jan 28 15:38 CET.
The if_ndis module from Jan 26 worked fine, but with the one from today
the card doesn't associate with my AP anymore:
ndis0: <Intel(R) PRO/Wireless LAN 2100 3B Mini PCI Adapter> mem
0xc0200000-0xc0200fff irq 6 at device 2.0 on pci2
can't re-use a leaf (ESS_ID)!
ndis0: NDIS API version: 5.1
ndis0: 802.11 address: 00:04:23:7e:d9:98
ndis0: 11b rates: 11Mbps 2Mbps 1Mbps
Everything fine so far, and I can set all params as usually with ifconfig:
ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 10.0.0.5 netmask 0xffffff00 broadcast 10.0.0.255
ether 00:04:23:7e:d9:98
media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
status: no carrier
ssid ""
channel 1 authmode OPEN powersavemode OFF powersavesleep 100
wepmode MIXED weptxkey 1
wepkey 1:104-bit
But, as you can see, I get no carrier. I can see the AP with "wicontrol
ndis0 -l", though.
I didn't change anything in my setup.
regards,
le
--
Lukas Ertl eMail: l.ertl at univie.ac.at
UNIX Systemadministrator Tel.: (+43 1) 4277-14073
Vienna University Computer Center Fax.: (+43 1) 4277-9140
University of Vienna http://mailbox.univie.ac.at/~le/
More information about the freebsd-current
mailing list