5.2-CURRENT panic on startup after cvsup: probably recent ATA
sos at deepcore.dk
sos at deepcore.dk
Tue Jan 13 10:09:45 PST 2004
It seems Randy Bush wrote:
> >> ata1: reiniting channel ..
> >> ata1: reset tp1 mask=03 ostat0=00 ostat1=00
> >> ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
> >> ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
> >> ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
> >> ata1: resetting done ..
> >> ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
> >> ata1-master: setting PIO4 on Intel ICH4 chip
> >> ata1-master: setting PIO4 on Intel ICH4 chip
> >> ata1: device config done ..
> >>
> >> Fatal trap 12: page fault while in kernel mode
> >>
> >> Is that any help?
> >
> > And what do youhave on ata1 ? one ATAPI device as master ?
>
> in my case, there is nothing on ata1. well, at least no devices ...
Well I need you boot log (verbose) as well then, since the aboveis
because of a fake device that ruins lunch...
Anyhow I came up with this fix that might help:
Index: ata-all.c
===================================================================
RCS file: /home/ncvs/src/sys/dev/ata/ata-all.c,v
retrieving revision 1.199
diff -u -r1.199 ata-all.c
--- ata-all.c 11 Jan 2004 22:08:34 -0000 1.199
+++ ata-all.c 13 Jan 2004 18:05:20 -0000
@@ -569,7 +569,7 @@
request->retries = 3;
request->bytecount = sizeof(struct ata_params);
request->transfersize = DEV_BSIZE;
- while (request->retries) {
+ while (request->retries > 0 ) {
ata_queue_request(request);
if (!(error = request->result))
break;
@@ -577,14 +577,8 @@
}
ata_free_request(request);
}
- if (!isprint(atadev->param->model[0]) ||
- !isprint(atadev->param->model[1]))
- error = ENXIO;
- if (error) {
- free(atadev->param, M_ATA);
- atadev->param = NULL;
- }
- else {
+ if (!error && (isprint(atadev->param->model[0]) ||
+ isprint(atadev->param->model[1]))) {
struct ata_params *atacap = atadev->param;
#if BYTE_ORDER == BIG_ENDIAN
int16_t *ptr;
@@ -612,6 +606,14 @@
ata_pmode(atacap), ata_wmode(atacap),
ata_umode(atacap),
(atacap->hwres & ATA_CABLE_ID) ? "80":"40");
+ }
+ else {
+ if (!error)
+ error = ENXIO;
+ if (atadev->param) {
+ free(atadev->param, M_ATA);
+ atadev->param = NULL;
+ }
}
}
return error;
-Søren
Yes I know it works under windows!!
More information about the freebsd-current
mailing list